Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Nagaitsev, “Review of Recent Advances in Cooling Techniques”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper FRXBA1, unpublished.
[n] Y. K. Batygin and F. Marti, “Beam Funneling in the Facility for Rare Isotope Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP120, pp. 5062-5064.
[n] I. Meshkov, A. Sidorin, A. Smirnov, E. Syresin, G. Trubnikov, and P. Zenkevich, “NUMERICAL SIMULATION OF PARTICLE DYNAMICS IN STORAGE RINGS USING BETACOOL CODE”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBI04, pp. XX-XX.
[n] G. Papotti, G. Cipolla, and K. Li, “RF power margin for operation with fixed-target in the CERN SPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS027, unpublished.
[n] A. Zelinsky, O. Bykhun, P. Gladkikh, I. Karnaukhov, and A. Mytsykov, “The results of the NSC KIPT subcritical assembly neutron source facility physical start up”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1633-1636. doi:10.18429/JACoW-IPAC2023-TUPA147
[n] T. Junquera, “SRF Activities at the IPN-LAL (CNRS Orsay) Laboratories”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A21, pp. 204-208.
[n] C. Kim, “Simulation of Emittance Growth in the ALS Pre-Injector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-47, pp. 427-429.
[n] C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2877-2880. doi:10.18429/JACoW-IPAC2023-WEPA099
[n] J. I. Hirota, K. Hiramoto, M. Nishi, Y. Iwashita, A. Noda, and M. Inoue, “A Ferrite Loaded Untuned Cavity for a Compact Proton Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ21, pp. 1770-1772.
[n] J. Campmany et al., “Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 324-326. doi:10.18429/JACoW-IPAC2021-MOPAB086
[n] G. Bassi, “Analytical formulae for the longitudinal impedance of two parallel layers with arbitrary complex permittivity and permeability”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3428-3431. doi:10.18429/JACoW-IPAC2023-WEPL139
[n] Y. Tanimoto, T. Nogami, and T. Obina, “Upgrade of the PF Ring Vacuum Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT049, pp. 3061-3063.
[n] S. Lindb?ñck and H. Lindqvist, “Injection in the VICKSI Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-03, pp. 226-230.
[n] F. L. Krawczyk, “Advanced Electromagnetic Design of Cavities for High Current Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC22, pp. 2361-2363.
[n] V. Auslender et al., “Electron Accelerator for Energy up to 5.0 MeV and Beam Power up to 50 KW with X-ray Converter”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF050, pp. 2383-2385.
[n] J. Marcos, J. Campmany, and D. Einfeld, “The Study of Errors of ALBA Fixed Stretched Wire Bench”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS135, pp. 3601-3603.
[n] H. M. Milchberg, C.G. Durfee III, T. M. Antonsen, and P. Mora, “Channel Guided Lasers for Plasma Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG04, pp. 621-625.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Nagaitsev, “Review of Recent Advances in Cooling Techniques”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper FRXBA1, unpublished.
- Y. K. Batygin and F. Marti, “Beam Funneling in the Facility for Rare Isotope Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP120, pp. 5062-5064.
- I. Meshkov, A. Sidorin, A. Smirnov, E. Syresin, G. Trubnikov, and P. Zenkevich, “NUMERICAL SIMULATION OF PARTICLE DYNAMICS IN STORAGE RINGS USING BETACOOL CODE”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBI04, pp. XX-XX.
- G. Papotti, G. Cipolla, and K. Li, “RF power margin for operation with fixed-target in the CERN SPS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS027, this conference.
- A. Zelinsky, O. Bykhun, P. Gladkikh, I. Karnaukhov, and A. Mytsykov, “The results of the NSC KIPT subcritical assembly neutron source facility physical start up”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA147, pp. 1633-1636.
- T. Junquera, “SRF Activities at the IPN-LAL (CNRS Orsay) Laboratories”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A21, pp. 204-208.
- C. Kim, “Simulation of Emittance Growth in the ALS Pre-Injector”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-47, pp. 427-429.
- C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA099, pp. 2877-2880.
- J. I. Hirota, K. Hiramoto, M. Nishi, Y. Iwashita, A. Noda, and M. Inoue, “A Ferrite Loaded Untuned Cavity for a Compact Proton Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ21, pp. 1770-1772.
- J. Campmany et al., “Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 324-326.
- G. Bassi, “Analytical formulae for the longitudinal impedance of two parallel layers with arbitrary complex permittivity and permeability”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL139, pp. 3428-3431.
- Y. Tanimoto, T. Nogami, and T. Obina, “Upgrade of the PF Ring Vacuum Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT049, pp. 3061-3063.
- S. Lindb?ñck and H. Lindqvist, “Injection in the VICKSI Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-03, pp. 226-230.
- F. L. Krawczyk, “Advanced Electromagnetic Design of Cavities for High Current Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC22, pp. 2361-2363.
- V. Auslender et al., “Electron Accelerator for Energy up to 5.0 MeV and Beam Power up to 50 KW with X-ray Converter”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF050, pp. 2383-2385.
- J. Marcos, J. Campmany, and D. Einfeld, “The Study of Errors of ALBA Fixed Stretched Wire Bench”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS135, pp. 3601-3603.
- H. M. Milchberg, C.G. Durfee III, T. M. Antonsen, and P. Mora, “Channel Guided Lasers for Plasma Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG04, pp. 621-625.
Back to search
