Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. E. Reece, S. Castagnola, P. Denny, and A. L. A. Mitchell, “New Improved Horizontal Electropolishing System for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 237. doi:10.18429/JACoW-SRF2021-MOPTEV014
[n] P. Krejcik, “Transverse Profiling of an Intense FEL X-Ray Beam Using a Probe Electron Beam”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 263-265. doi:10.18429/JACoW-IBIC2015-TUALA02
[n] S. R. Koscielniak et al., “e- Linac for RIB”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROAAU06, pp. 907-912.
[n] Y. Lee, E.-S. Kim, J. Kim, S. H. Park, and S. Shin, “Study on beam injection and ramping efficiency for Korea-4GSR booster synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1025-1028. doi:10.18429/JACoW-IPAC2024-TUPC12
[n] H. Ohgaki, Y. Iwasaki, S. Koda, K. Kudo, T. Tomimasu, and H. Toyokawa, “Design of Control System for SAGA Synchrotron Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE029, pp. 2387-2389.
[n] N. Baboi, R. Brinkmann, H. Chen, M. Liepe, and J. Sekutowicz, “HOM Damping Requirements for the TESLA Superstructures”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B05, pp. 2016-2018.
[n] B. P. Xiao et al., “Design and Measurement of the 1.4 GHz Cavity for LEReC Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1113-1115. doi:10.18429/JACoW-IPAC2021-MOPAB358
[n] K. A. Marsh et al., “X-ray Radiation and Electron Injection from Beam Envelope Oscillations in Plasma Wakefield Accelerator Experiments at FACET”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THOCA1, pp. 1105-1107.
[n] J. Choi and Y. Hidaka, “Study of the Beam Current Effects on the NSLS-II Storage Ring Optics Using Turn-by-Turn Data”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 375-378. doi:10.18429/JACoW-IPAC2019-MOPGW110
[n] E. Kako et al., “Cryomodule Tests of Tesla-like Cavities in S1-Global for ILC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP082, pp. 602-604.
[n] L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Study of Integrable and Quasi-Integrable Sextupole Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 371-374. doi:10.18429/JACoW-IPAC2019-MOPGW107
[n] I. Yamane et al., “PRIME - A Synchrotrom of a Phased Program for the Japan Hadron Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 488-491.
[n] M. Ferrario et al., “Recent Results at the SPARCLAB Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP017, pp. 2758-2760.
[n] K. Hosoyama et al., “Construction and Commissioning of KEKB Superconducting Crab Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO405, pp. XX-XX.
[n] P. Kuske and K. Ott, “Beam-Based Alignment at BESSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP001L, pp. 887-889.
[n] M. W. McGee, C. R. Ader, K. Anderson, J. Hylen, and M. A. Martens, “Thermal and Structual Stability of Medium Energy Target Carrier Assembly for NOvA at Fermilab”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC042, pp. 4152-4154.
[n] E. Chyhyrynets et al., “Vibro-tumbling as an Alternative to Standard Mechanical Polishing Techniques for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 464-466. doi:10.18429/JACoW-SRF2019-TUP026
[n] F. Y. Li, B. E. Carlsten, R. Garimella, C. Huang, and T. J. Kwan, “Validation of a Novel Method for the Calculation of Near-Field Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 397-399. doi:10.18429/JACoW-IPAC2019-MOPGW116
[n] E. Vogel, “Examination of the Longitudinal Stability of the HERA Proton Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI080, pp. 1577-1579.
For LaTeX
Use Complete Form
For BibTeX
References
- C. E. Reece, S. Castagnola, P. Denny, and A. L. A. Mitchell, “New Improved Horizontal Electropolishing System for SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 237.
- P. Krejcik, “Transverse Profiling of an Intense FEL X-Ray Beam Using a Probe Electron Beam”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 263-265.
- S. R. Koscielniak et al., “e- Linac for RIB”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROAAU06, pp. 907-912.
- Y. Lee, E.-S. Kim, J. Kim, S. H. Park, and S. Shin, “Study on beam injection and ramping efficiency for Korea-4GSR booster synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC12, pp. 1025-1028.
- H. Ohgaki, Y. Iwasaki, S. Koda, K. Kudo, T. Tomimasu, and H. Toyokawa, “Design of Control System for SAGA Synchrotron Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE029, pp. 2387-2389.
- N. Baboi, R. Brinkmann, H. Chen, M. Liepe, and J. Sekutowicz, “HOM Damping Requirements for the TESLA Superstructures”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B05, pp. 2016-2018.
- B. P. Xiao et al., “Design and Measurement of the 1.4 GHz Cavity for LEReC Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1113-1115.
- K. A. Marsh et al., “X-ray Radiation and Electron Injection from Beam Envelope Oscillations in Plasma Wakefield Accelerator Experiments at FACET”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THOCA1, pp. 1105-1107.
- J. Choi and Y. Hidaka, “Study of the Beam Current Effects on the NSLS-II Storage Ring Optics Using Turn-by-Turn Data”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 375-378.
- E. Kako et al., “Cryomodule Tests of Tesla-like Cavities in S1-Global for ILC”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP082, pp. 602-604.
- L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Study of Integrable and Quasi-Integrable Sextupole Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 371-374.
- I. Yamane et al., “PRIME - A Synchrotrom of a Phased Program for the Japan Hadron Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 488-491.
- M. Ferrario et al., “Recent Results at the SPARCLAB Facility”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP017, pp. 2758-2760.
- K. Hosoyama et al., “Construction and Commissioning of KEKB Superconducting Crab Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper MO405, pp. XX-XX.
- P. Kuske and K. Ott, “Beam-Based Alignment at BESSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP001L, pp. 887-889.
- M. W. McGee, C. R. Ader, K. Anderson, J. Hylen, and M. A. Martens, “Thermal and Structual Stability of Medium Energy Target Carrier Assembly for NOvA at Fermilab”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC042, pp. 4152-4154.
- E. Chyhyrynets et al., “Vibro-tumbling as an Alternative to Standard Mechanical Polishing Techniques for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 464-466.
- F. Y. Li, B. E. Carlsten, R. Garimella, C. Huang, and T. J. Kwan, “Validation of a Novel Method for the Calculation of Near-Field Synchrotron Radiation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 397-399.
- E. Vogel, “Examination of the Longitudinal Stability of the HERA Proton Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI080, pp. 1577-1579.
Back to search