Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. D. Jang, S. J. Kwon, Y. G. Son, E. H. Song, J.-H. Suh, and J.-S. Oh, “Stabilization of a Klystron Voltage at 100 PPM Level for PAL XFEL”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH033, pp. 424-427.
[n] J. Huang et al., “The Design of Permenant Magnet Spread System for 0.5 MeV Irradiation Accelerator”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 541-543. doi:10.18429/JACoW-RUPAC2016-THPSC003
[n] Th. J. M. Sluyters, “Brookhaven's Recent Pre-Accelerator Progress”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-05, pp. 383-389.
[n] T. Shintake et al., “Development of a Smart Modulator and Efficiency Evaluation of 500 GeV e+e- C-band Linear Collider”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA12, pp. 763-765.
[n] D. C. Carey, “Minimization of Aberrations in Beam Line Design”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 493-496.
[n] J. Yang, K. Kan, T. Kondoh, A. Yoshida, and Y. Yoshida, “Femtosecond Single-bunch Electron Linear Accelerator Based on a Photocathode RF Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS058, pp. 2514-2516.
[n] W. Namkung, Y. S. Lee, I. S. Ko, G. N. Kim, M. H. Cho, and H. S. Kang, “Pulsed Neutron Source using 100-MeV Electron Linac at Pohang Accelerator Laboratory”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUE06, pp. 621-623.
[n] C.-K. Sung, M. Cho, S. Kim, K. Moon, C. H. Shim, and H. Yang, “Longitudinal phase space measurement using a corrugated structure at the PAL-XFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS101, unpublished.
[n] L. C. Teng, “Performance Limitations Imposed by Beam Dynamics”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1826-1833.
[n] T. Kondoh, S. Tagawa, J. Yang, and Y. Yoshida, “Electron Beam Pulse Processing toward the Intensity Modified Radiation Therapy (IMRT)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH172, pp. 2334-2336.
[n] S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736.
[n] H. T. Edwards, W. W. Lee, J. D. McCarthy, S. Ohnuma, and L. C. Teng, “Half-Integer Resonance Extraction for the NAL Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 424-428.
[n] D. C. Carey, “The Appearance of Beam Lines”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 47-50.
[n] J. Y. Huang, D. H. Jung, K. H. Kim, S. H. Nam, M. Yoon, and I. S. Ko, “Beam-Based Offset Calibration of the PLS BPM”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P082, pp. 2107-2109.
[n] B. R. Park et al., “Sequence Control System of 1-MW CW Klystron for the PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT014, pp. 1401-1403.
[n] S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Design and Fuild-Solid-Heat Coupling Analysis of an Electrostatic Deflector for Hust SCC250 Proton Therapy Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4713-4715. doi:10.18429/JACoW-IPAC2017-THPVA109
[n] S. H. Nam et al., “Development of a General Purpose Power System Control Board”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH120, pp. 3083-3085.
[n] M. H. Cho, J. S. Oh, S. S. Park, and W. Namkung, “Klystron-Modulator System Performances for PLS 2-GeV Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ15, pp. 1556-1558.
[n] A. Faltens and D. Keefe, “Review of Induction Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper F01, pp. 205-213.
[n] R. E. Melen, B. Salsburg, and J. Yang, “Vacuum Contol System for Synchrotron Radiation Beam Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3919-3922.
[n] S. Kim et al., “Simulation studies on optimization of hard and soft X-ray beamlines for parallel user service at the PAL-XFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 235-238. doi:10.18429/JACoW-IPAC2025-MOPB098
[n] S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Geant4 Simulation of Radiation Effect on the Deflector of Extraction System in HUST SCC250”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 990-993. doi:10.18429/JACoW-IPAC2018-TUPAK013
[n] L. C. Teng, “Stochasticity Limit and Turbulent Motion of Phase-Space Fluid”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 843-846.
[n] M. Cho et al., “Averaged FEL algorithm to simulate an arbitrary FEL polarization”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 126-129. doi:10.18429/JACoW-IPAC2025-MOPB030
[n] L. G. Zhang, K. Fan, S. Hu, Z. Y. Mei, and Z. J. Zeng, “Design of the Trim Coil for the Superconducting Cyclotron Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2840-2842. doi:10.18429/JACoW-IPAC2018-WEPML064
[n] Y. Kim, M. H. Cho, I. S. Ko, W. Namkung, J. S. Oh, and D. Son, “Start-To-End Simulations for PAL XFEL Project”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS18, pp. XX-XX.
[n] D. P. Jensen Jr, “Utilizing Additive Manufacturing to Create Prototype and Functional Beamline Instrumentation and Support Components”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 189. doi:10.18429/JACoW-MEDSI2020-TUPC07
[n] H. B. Knowles, “Shielding and Experimental Layout”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-06, pp. 110-123.
For LaTeX
Use Complete Form
For BibTeX
References
- S. D. Jang, S. J. Kwon, Y. G. Son, E. H. Song, J.-H. Suh, and J.-S. Oh, “Stabilization of a Klystron Voltage at 100 PPM Level for PAL XFEL”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH033, pp. 424-427.
- J. Huang et al., “The Design of Permenant Magnet Spread System for 0.5 MeV Irradiation Accelerator”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 541-543.
- Th. J. M. Sluyters, “Brookhaven's Recent Pre-Accelerator Progress”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VII-05, pp. 383-389.
- T. Shintake et al., “Development of a Smart Modulator and Efficiency Evaluation of 500 GeV e+e- C-band Linear Collider”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA12, pp. 763-765.
- D. C. Carey, “Minimization of Aberrations in Beam Line Design”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 493-496.
- J. Yang, K. Kan, T. Kondoh, A. Yoshida, and Y. Yoshida, “Femtosecond Single-bunch Electron Linear Accelerator Based on a Photocathode RF Gun”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS058, pp. 2514-2516.
- W. Namkung, Y. S. Lee, I. S. Ko, G. N. Kim, M. H. Cho, and H. S. Kang, “Pulsed Neutron Source using 100-MeV Electron Linac at Pohang Accelerator Laboratory”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUE06, pp. 621-623.
- C.-K. Sung, M. Cho, S. Kim, K. Moon, C. H. Shim, and H. Yang, “Longitudinal phase space measurement using a corrugated structure at the PAL-XFEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS101, unpublished.
- L. C. Teng, “Performance Limitations Imposed by Beam Dynamics”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1826-1833.
- T. Kondoh, S. Tagawa, J. Yang, and Y. Yoshida, “Electron Beam Pulse Processing toward the Intensity Modified Radiation Therapy (IMRT)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH172, pp. 2334-2336.
- S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736.
- H. T. Edwards, W. W. Lee, J. D. McCarthy, S. Ohnuma, and L. C. Teng, “Half-Integer Resonance Extraction for the NAL Accelerator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 424-428.
- D. C. Carey, “The Appearance of Beam Lines”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 47-50.
- J. Y. Huang, D. H. Jung, K. H. Kim, S. H. Nam, M. Yoon, and I. S. Ko, “Beam-Based Offset Calibration of the PLS BPM”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P082, pp. 2107-2109.
- B. R. Park et al., “Sequence Control System of 1-MW CW Klystron for the PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT014, pp. 1401-1403.
- S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Design and Fuild-Solid-Heat Coupling Analysis of an Electrostatic Deflector for Hust SCC250 Proton Therapy Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4713-4715.
- S. H. Nam et al., “Development of a General Purpose Power System Control Board”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH120, pp. 3083-3085.
- M. H. Cho, J. S. Oh, S. S. Park, and W. Namkung, “Klystron-Modulator System Performances for PLS 2-GeV Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ15, pp. 1556-1558.
- A. Faltens and D. Keefe, “Review of Induction Linacs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper F01, pp. 205-213.
- R. E. Melen, B. Salsburg, and J. Yang, “Vacuum Contol System for Synchrotron Radiation Beam Lines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3919-3922.
- S. Kim et al., “Simulation studies on optimization of hard and soft X-ray beamlines for parallel user service at the PAL-XFEL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB098, pp. 235-238.
- S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Geant4 Simulation of Radiation Effect on the Deflector of Extraction System in HUST SCC250”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 990-993.
- L. C. Teng, “Stochasticity Limit and Turbulent Motion of Phase-Space Fluid”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 843-846.
- M. Cho et al., “Averaged FEL algorithm to simulate an arbitrary FEL polarization”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB030, pp. 126-129.
- L. G. Zhang, K. Fan, S. Hu, Z. Y. Mei, and Z. J. Zeng, “Design of the Trim Coil for the Superconducting Cyclotron Extraction”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2840-2842.
- Y. Kim, M. H. Cho, I. S. Ko, W. Namkung, J. S. Oh, and D. Son, “Start-To-End Simulations for PAL XFEL Project”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS18, pp. XX-XX.
- D. P. Jensen Jr, “Utilizing Additive Manufacturing to Create Prototype and Functional Beamline Instrumentation and Support Components”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 189.
- H. B. Knowles, “Shielding and Experimental Layout”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-06, pp. 110-123.
Back to search