Favourites
For Word
[n] K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Design of new 18 GHz ECR for RIKEN RIBF”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEZO02, pp. 114-116.
[n] C. Jach, R. Harold, K. Smedley, E. Tacconi, and R. Winje, “Low Energy Booster Main Magnet Power Supply System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1438-1441.
[n] R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 427-430.
[n] M. Ge, T. Gruber, A. T. Holic, M. Liepe, and J. Sears, “Superconducting RF Performance of Cornell 500 MHz N-Doped B-Cell SRF Cavitiy”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 764. doi:10.18429/JACoW-SRF2021-THPFDV005
[n] S. J. Payne et al., “Beam Diagnostics at ISIS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF10, pp. 466-471.
[n] A. Vannozzi et al., “Magnetic measurements for Halbach-type permanent quadrupoles using a single-stretched wire system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3864-3867. doi:10.18429/JACoW-IPAC2024-THPS54
[n] M. A. Nozdrin et al., “JINR Photocathode Research: Status and Plans”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 62-64. doi:10.18429/JACoW-LINAC2018-MOPO010
[n] P. Faure, L. Courtois, J. Handerek, H. Riege, and G. H. Schroeder, “Development of High-Power Switches for the LHC Beam Dumping Pulser”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1597-1600.
[n] M. Yamamoto et al., “Influence of a Positive Grid Biasing on RF System in J-PARC RCS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1336-1338. doi:10.18429/JACoW-IPAC2022-TUPOTK052
[n] K. Gross and D. E. M. Lens, “Modeling Longitudinal Bunched Beam Dynamics in Hadron Synchrotrons using Scaled Fourier-Hermite Expansions”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA010, pp. 2513-2515.
[n] J. Sinsheimer et al., “Precision Insertion Device Control and Simultaneous Monochromator Fly Scanning for NSLS-II”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1245. doi:10.18429/JACoW-ICALEPCS2019-WEPHA063
[n] S. A. Belomestnykh et al., “High Power Testing RF System Components for the Cornell ERL Injector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH175, pp. 472-474.
[n] J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124.
[n] T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
[n] R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452.
[n] H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory for a Smith-Purcell Free-Electron Laser with Grating Sidewalls”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH005, pp. 17-20.
[n] G. M. Wang, “Beam Stability Requirements for Ultra-Low Emittance Circular Light Sources”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WE2T1, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Design of new 18 GHz ECR for RIKEN RIBF”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEZO02, pp. 114-116.
- C. Jach, R. Harold, K. Smedley, E. Tacconi, and R. Winje, “Low Energy Booster Main Magnet Power Supply System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1438-1441.
- R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 427-430.
- M. Ge, T. Gruber, A. T. Holic, M. Liepe, and J. Sears, “Superconducting RF Performance of Cornell 500 MHz N-Doped B-Cell SRF Cavitiy”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 764.
- S. J. Payne et al., “Beam Diagnostics at ISIS”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF10, pp. 466-471.
- A. Vannozzi et al., “Magnetic measurements for Halbach-type permanent quadrupoles using a single-stretched wire system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS54, pp. 3864-3867.
- M. A. Nozdrin et al., “JINR Photocathode Research: Status and Plans”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 62-64.
- P. Faure, L. Courtois, J. Handerek, H. Riege, and G. H. Schroeder, “Development of High-Power Switches for the LHC Beam Dumping Pulser”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1597-1600.
- M. Yamamoto et al., “Influence of a Positive Grid Biasing on RF System in J-PARC RCS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1336-1338.
- K. Gross and D. E. M. Lens, “Modeling Longitudinal Bunched Beam Dynamics in Hadron Synchrotrons using Scaled Fourier-Hermite Expansions”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA010, pp. 2513-2515.
- J. Sinsheimer et al., “Precision Insertion Device Control and Simultaneous Monochromator Fly Scanning for NSLS-II”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1245.
- S. A. Belomestnykh et al., “High Power Testing RF System Components for the Cornell ERL Injector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH175, pp. 472-474.
- J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124.
- T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
- R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452.
- H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory for a Smith-Purcell Free-Electron Laser with Grating Sidewalls”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH005, pp. 17-20.
- G. M. Wang, “Beam Stability Requirements for Ultra-Low Emittance Circular Light Sources”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper WE2T1, unpublished.
Back to search