JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Chu et al., “Data Acquisition and Fault Diagnostic System of Samsung Superconductor Test Facility”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP515, pp. XX-XX. 
[n]	R. Garoby et al., “Linac4, a New Injector for the CERN PS Booster”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS057, pp. 1624-1626. 
[n]	R. C. Fernow, “ICOOL: A Simulation Code for Ionization Cooling of Muon Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP31, pp. 3020-3022. doi:10.1109/PAC.1999.792132
[n]	R. P. Truntseva, N. N. Kurapov, A. M. Opekunov, A. V. Telnov, and N. V. Zavyalov, “Calculation of Dose Fields and Energy Spectra of Secondary Radiation in the Extraction Zone of a Synchrotron Accelerator for Protons With Energies Up to 700 MeV”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 222-224. doi:10.18429/JACoW-RuPAC2021-MOPSA54
[n]	G. Chiozzi et al., “The ELT Control System: Recent Developments”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 37-44. doi:10.18429/JACoW-ICALEPCS2021-MOBL01
[n]	V. P. Nagaslaev, V. A. Lebedev, and S. J. Werkema, “Lattice Optimization for the Stochastic Cooling in the Accumulator Ring at Fermilab”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUA2C09, pp. 110-112. 
[n]	D.-O. Jeon, “Comparison of Phase Scan vs Acceptance Scan for the SNS DTL”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP070, pp. 415-417. 
[n]	Y. T. Li, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Phase Shifter Power Supply Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3576-3578. doi:10.18429/JACoW-IPAC2016-THPMW017
[n]	T. Flisgen, H.-W. Glock, and A. V. Tsakanian, “Estimation of Dielectric Losses in the Bessy VSR Warm Beam Pipe Absorbers”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3185-3188. doi:10.18429/JACoW-IPAC2018-THPAF085
[n]	M. A. Allen, L. G. Karvonen, J.-L. Pellegrin, and P. B. Wilson, “RF System for the PEP Storage Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1780-1783. 
[n]	J. E. Spencer, R. J. England, C.-K. Ng, R. J. Noble, Z. Wu, and D. Xu, “Coupler Studies for PBG Fiber Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP136, pp. 346-348. 
[n]	C. B. Bigham, E. A. Heighway, J. E. McGregor, and A. Perujo, “The Rebuncher for the Tandem-Superconducting Cyclotron Beam Bunching System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B42, pp. 169-172. 
[n]	C. Pennington et al., “Ultra thin Cs3Sb photocathodes with anomalously high quantum efficiency”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1605-1607. doi:10.18429/JACoW-IPAC2023-TUPA132
[n]	A. Kovach, J. Grillenberger, A. S. Parfenova, and M. Seidel, “Energy Efficiency and Saving Potential Analysis of the High Intensity Proton Accelerator HIPA at PSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2399-2402. doi:10.18429/JACoW-IPAC2017-TUPVA129
[n]	G. Marcus et al., “Sensitivity of LCLS Self-Seeded Pedestal Emission to Laser Heater Strength”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 126-126. doi:10.18429/JACoW-FEL2019-TUP035
[n]	F. Saeidi et al., “Iranian Light Source Facility Storage Ring Low Field Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1241-1243. doi:10.18429/JACoW-IPAC2014-TUPRO086
[n]	K. J. Hazelwood et al., “Real-Time Edge AI for Distributed Systems (READS): Progress on Beam Loss De-Blending for the Fermilab Main Injector and Recycler”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 912-915. doi:10.18429/JACoW-IPAC2021-MOPAB288
[n]	A. C. Caruso et al., “The Developments of the RF System Related to the K-800 Superconducting Cyclotron Upgrade”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 262-265. doi:10.18429/JACoW-CYCLOTRONS2019-WEA02
[n]	N. Janvier, J. M. Clement, P. Fajardo, and G. Cuni, “IcePAP: An Advanced Motor Controller for Scientific Applications in Large User Facilities”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC081, pp. 766-769. 
[n]	M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3729-3731. doi:10.18429/JACoW-IPAC2018-THPAL040
[n]	C. Hovjat, M. Joy, and R. C. Webber, “Stripping Foils for Multiturn Charge Exchange Injection into the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4009-4012. 
[n]	S. Lee, J. S. Hong, J. S. Park, M. K. Park, and S. W. Yun, “Management Tools for Distributed Control System in KSTAR”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU006, pp. 694-697. 
[n]	P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546. 
[n]	J. N. Bai et al., “First Idea on Bunch to Bucket Transfer for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO024, pp. 207-209. 
[n]	T. Higo, K. Kubo, M. Takao, and K. Takata, “X-Band Accelerating Structure for Japan Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1011-1014. 
[n]	M. Di Carlo et al., “CI-CD Practices with the TANGO-controls Framework in the Context of the Square Kilometre Array (SKA) Telescope Project”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 114. doi:10.18429/JACoW-ICALEPCS2019-MOCPR05
[n]	N. Kumar et al., “Gas jet dosimeter measurements at DCF for medical accelerator applications”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2418-2421. doi:10.18429/JACoW-IPAC2024-WEPG86
[n]	N. Y. Joshi, R. M. Jones, N. Baboi, and L. Shi, “Simulation of Electromagnetic Scattering Through the E-XFEL Third Harmonic Cavity Module”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3001-3004. doi:10.18429/JACoW-IPAC2016-WEPOY007
[n]	K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911. 
[n]	O. Etisken, F. Antoniou, Y. Papaphilippou, T. Tydecks, and A. K. ?çift?ºi, “Updates on Alternative Pre-Booster Ring Design and Wiggler Magnet Considerations of SPS for the FCC e?e? Injector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1094-1097. doi:10.18429/JACoW-IPAC2019-MOPTS097
[n]	I. Martini, E. Chevallay, S. Doebert, V. Fedosseev, C. Hessler, and M. Martyanov, “Studies of Cs3Sb Cathodes for the CLIC Drive Beam Photoinjector Option”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI058, pp. 413-415. 
[n]	T. Pulampong, P. Klysubun, P. Sudmuang, and P. Sunwong, “Study on Injection with Pulsed Multipole Magnet for SPS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1573-1575. doi:10.18429/JACoW-IPAC2017-TUPAB109
[n]	J. Bradley, J. D. Crnkovic, D. Stratakis, and M. J. Syphers, “Initial Studies into Longitudinal Ionization Cooling for the Muon g-2 Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1522-1525. doi:10.18429/JACoW-IPAC2018-TUPMK015
[n]	W. Wu et al., “Multipole Magnets for the HIAF Fragment Separator Using  the Canted-Cosine-Theta (CCT) Geometry”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 170-174. doi:10.18429/JACoW-HIAT2018-THOBA01
[n]	G. Gevorkyan, C. Sarabia Cardenas, P. Bhattacharyya, S. Karkare, and M. Moeini Rizi, “Phase space measurements of an electron beam using the ASU cryocooled 200 kV DC electron gun”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2182-2185. doi:10.18429/JACoW-IPAC2023-TUPL190
[n]	P. B. Wilson et al., “Bunch Lengthening and Related Effects in SPEAR II”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1211-1215. 
[n]	H. Okamoto, H. Higaki, K. Ito, S. M. Lund, and H. Sugimoto, “S-POD Experiments of Space-Charge-Dominated Beam Resonances”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA007, pp. 1339-1341. 
[n]	L. Shi, R. M. Jones, N. Baboi, and N. Y. Joshi, “Measurement of Beam Phase at FLASH using HOMs in Accelerating Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 686-688. doi:10.18429/JACoW-IPAC2016-MOPOR039
[n]	M. K. Eseev et al., “Mechanism of Compression of Positron Clouds in the Surko Trap of the LEPTA Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUCA04, pp. 20-22. 
[n]	C. Huang et al., “Simulations of 25 GeV PWFA Sections: Path Towards a PWFA Linear Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP097, pp. 3025-3027. 
[n]	P. Sunwong et al., “Development of stretched wire system for magnetic field measurement of magnets for Siam Photon Source II”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS049, unpublished. 
[n]	N. A. Stilin et al., “Status Update on CornellÔÇÖs SRF Compact Conduction Cooled Cryomodule”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1299-1302. doi:10.18429/JACoW-IPAC2022-TUPOTK037
[n]	I. Igor et al., “VIL410, CPI's 1.3 GHz, 25 kW CW IOT Amplifier System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2305-2307. doi:10.18429/JACoW-IPAC2014-WEPME023
[n]	P. Lapostolle, E. Tanke, S. R. Valero, M. J. Vretenar, and D. J. Warner, “Computer Design and Dynamics of the Quasi-Alvarez Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO421, pp. 99-101. 
[n]	A. Santamar?¡a Garc?¡a et al., “Limits on Failure Scenarios for Crab Cavities in the HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3923-3926. doi:10.18429/JACoW-IPAC2015-THPF095
[n]	D. Raparia, J. G. Alessi, A. Ruggiero, and W.-T. Weng, “Injector Linac for the BNL Super Neutrino Beam Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE050, pp. 3129-3131. 
[n]	K.-J. Kim and V. Kumar, “Three-Dimensional Analysis of the Surface Mode Supported by a Reflection Grating”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH010, pp. 38-41. 
[n]	D. Schneider et al., “Development of an active beam-stabilization system for electrofission experiments at the S-DALINAC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2411-2414. doi:10.18429/JACoW-IPAC2024-WEPG83
[n]	Y. Tian, L. R. Dalesio, G. Ganetis, W. Louie, and J. Riciardelli, “Power Supply Control System of NSLS-II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB005, pp. 385-387. 
[n]	S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423. 
[n]	R. G. Pausch et al., “Computing Angularly-resolved Far Field Emission Spectra in Particle-in-cell Codes using GPUs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 761-764. doi:10.18429/JACoW-IPAC2014-MOPRI069
[n]	R. Nagaoka et al., “Operational Status of the Transverse Bunch by Bunch Feedback System at SOLEIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB029, pp. 2746-2748. 
[n]	H. Nesemann, W. Brefeld, F. Brinker, W. Decking, O. Kaul, and B. Sarau, “DORIS III as a Dedicated Source for Synchrotron Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA02, pp. 195-197. 
[n]	E. Todesco, F. Borgnolutti, and A. Mailfert, “130 mm Aperture Quadrupoles for the LHC Luminosity Upgrade”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN083, pp. 350-352. 
[n]	Y. Chen and M. Reiser, “Radial Focusing in an Induction Linac Gap”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-43, pp. 634-636. 
[n]	I. Ito, Y. Honda, Y. Kobayashi, N. Nakamura, K. Torizuka, and D. Yoshitomi, “Development of an Yb-doped Fiber Laser System for an ERL Photocathode Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD104, pp. 2141-2143. 
[n]	P. Saha et al., “Beam loss and beam emittance minimization at J-PARC RCS for simultaneous operation to the MLF and MR”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 939-942. doi:10.18429/JACoW-IPAC2024-TUAN1
[n]	G. Jud, A. Luedeke, and W. Portmann, “The PSI Web Interface to the EPICS Channel Archiver”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN020, pp. 141-143. 
[n]	S. K. Suneet et al., “SF6 Gas Monitoring and Safety for DC Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP007, pp. 61-63. 
[n]	A. I. Warwick, T. J. Fessenden, D. Keefe, C. H. Kim, and H. Meuth, “Performance of MBE-4, An Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 118-121. 
[n]	N. Solyak and S. A. Glukhov, “Studies of Orthogonal Bumps for ILC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC037, pp. 3059-3061. 
[n]	C. Emma, C. Pellegrini, M. W. Guetg, A. A. Lutman, A. Marinelli, and J. Wu, “High Efficiency, High Brightness X-ray Free Electron Lasers via Fresh Bunch Self-Seeding”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 805-808. doi:10.18429/JACoW-IPAC2016-MOPOW040
[n]	F. Armborst, J. Kallestrup, M. I. Besana, and M. Paraliev, “SLS 2.0 machine protection”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1019-1022. doi:10.18429/JACoW-IPAC2023-MOPM018
[n]	C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479. 
[n]	Y. Valdau et al., “Upgrade of Beam Diagnostic Systems at JULIC Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO012, pp. 231-233. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO012
[n]	R. J. Pasquinelli et al., “Progress in Antiproton Production at the Fermilab Tevatron Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP075, pp. 1463-1465. 
[n]	T. G. Lee, S. Lee, and M. K. Park, “Application of MDSplus for the Management of the Pulsed-based Experimental Data in KSTAR Tokamak”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP012, pp. XX-XX. 
[n]	K.C.D. Chan, A. Browman, R. L. Hutson, R. J. Macek, P. J. Tallerico, and C. A. Wilkinson, “Development of a RAMI Program for LANSCE Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR12, pp. 822-824. 
[n]	S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished. 
[n]	C. Hessler et al., “Recent Developments at the High-charge PHIN Photoinjector and the CERN Photoemission Laboratory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 695-697. doi:10.18429/JACoW-IPAC2014-MOPRI042
[n]	J. T. Seeman, H. Fischer, and W. Roster, “Observation of Induced Beam Oscillation from Actively Displaced RF Accelerating Structures”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB06, pp. 3028-3030. 
[n]	J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602. 
[n]	M. K. Park, G. S. Lee, J. T. Noh, J. Y Huang, and I. S. Ko, “The Interlock System For U7 Undulator in PLS”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D008, pp. 686-688. 
[n]	N. V. Avreline, “The Analytical Model of the Helical Accelerating Structure of Linac with Helix Outside of the Vacuum Chamber”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3908-3910. doi:10.18429/JACoW-IPAC2018-THPAL114
[n]	D. Swenson, E. Degenkolb, and Z. Insepov, “Study of Gas Cluster Ion Beam Surface Treatments for Mitigating RF Breakdown”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP07, pp. 248-250. 
[n]	Y. Iwata et al., “Beam Dynamics of Alternating-Phase-Focused Linacs for Medical Accelerators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP18004, pp. XX-XX. 
[n]	G. V. Dolbilov, “Two-Beam Induction Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B15, pp. 904-906. 
[n]	S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362. 
[n]	K. Gross, D. Domont-Yankulova, J. Harzheim, H. Klingbeil, and M. Frey, “Test Setup for Automated Barrier Bucket Signal Generation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3948-3950. doi:10.18429/JACoW-IPAC2017-THPAB098

For LaTeX

Use Complete Form

For BibTeX

References

Back to search