Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Fu, J. Morris, and S. Nemesure, “Asynchronous Data Change Notification between Database Server and Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN021, pp. 144-146.
[n] K. D. Jacobs et al., “The MIT-BATES South Hall Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 362-365.
[n] V. Miltchev, D. Riebesehl, J. Rossbach, M. Trunk, and O. Stein, “SALOME: An Accelerator for the Practical Course in Accelerator Physics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2235-2237. doi:10.18429/JACoW-IPAC2014-WEPRO114
[n] T. A. Miller et al., “Current Measurement and Associated Machine Protection in the ERL at BNL”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 52-57. doi:10.18429/JACoW-ERL2015-WEIALH2048
[n] C. Chu and T. A. Pelaia, “Beam Trajectory Correction for SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT015, pp. 1425-1427.
[n] A. Schempp, M. Ferch, and H. Klein, “A Light Ion Four Rod RFQ Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 267-270.
[n] A. V. Otboev and E. A. Perevedentsev, “A Model of Self-consistent Transverse Distribution of Colliding Bunches”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B05, pp. 1214-1216.
[n] D. Giove et al., “A High Voltage Extractor with Photocathodes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP02F, pp. 1133-1135.
[n] B. Newnam, “XUV Free-Electron Laser Development at Los Alamos”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-03, pp. 290-294.
[n] O. I. Meshkov et al., “OPTICAL DIAGNOSTIC OF THE VEPP-4M COLLIDER”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHO02, pp. XX-XX.
[n] K. Takayama, “Beam Break-Up and Resistive Wall Instability in a Steady-State Free Electron Laser in the Microwave Regime”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-06, pp. 318-321.
[n] A. Schempp et al., “Zero-Mode-RFQ Development in Frankfurt”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0006, pp. 100-102.
[n] V. G. Dudnikov et al., “Saddle Antenna RF Ion Sources for Efficient Positive and Negative Ions Production”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4060-4062. doi:10.18429/JACoW-IPAC2015-THPF143
[n] P. Gurd, G. Lawson, D. H. Thompson, and E. Williams, “The Application of Linux Soft IOCs for Status Summaries at the Spallation Neutron Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_102.
[n] D. Curry, J. Dedic, and D. H. Thompson, “Firmware Development for SNS New Timing Master”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP087, pp. 4162-4164.
[n] S. Schreiber, K. Honkavaara, Ph. Piot, and D. Sertore, “Bunch Length Measurements at the TESLA Test Facility Using a Streak Camera”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH110, pp. 2341-2343.
[n] A. Schempp, H. Klein, K. H. Pape, P. Schastok, and S. H. Wang, “The HERA RFQ”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 361-364.
[n] C. K. Allen et al., “A Modular On-line Simulator for Model Reference Control of Charged Particle Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG033, pp. 3527-3529.
[n] W. Fu, T. D, D. M. Gassner, J. Morris, and S. Nemesure, “Quick Setup of Unit Test For Accelerator Controls System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP247, pp. 574-576.
[n] I. A. Koop et al., “Concept for a Polarised Electron-Proton Collider with 15-30 GeV c.m. Energy and 1033 cm-2s-1 Luminosity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH043, pp. 3320-3322.
[n] A. Schempp et al., “Performance of the DESY RFQs”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 587-590.
[n] M. Kuntzsch et al., “CW Beam Stability Analysis in Time and Frequency Domain”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD15, pp. 179-181.
[n] I. M. Zemlyansky et al., “Electron and Positron Beams Transportation Channels to BINP Colliders”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper FRCA03, pp. 462-464.
[n] S. M. Cousineau et al., “Development of Injection and Optics Control Applications for the SNS Accumulator Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT166, pp. 2849-2851.
[n] Y. W. Kang et al., “Construction, Test, and Operation of a new RFQ at the Spallation Neutron Source (SNS)”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1113-1116. doi:10.18429/JACoW-IPAC2018-TUPAL046
[n] H. Hayano, “Cryomodule Test Facilities and Multicell Cavity Performance for the ILC”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH1002, pp. 516-520.
[n] C. Sibley III, D. J. Armstrong, A. Jones, T. A. Justice, and D. H. Thompson, “The SNS Machine Protection System: Early Commissioning Results and Future Plans”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE021, pp. 1727-1729.
[n] I. M. Zemlyansky et al., “Commissioning of e+/e- Transfer Line from BINP Injection Complex to VEPP-2000 Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 213-215. doi:10.18429/JACoW-RUPAC2016-TUPSA001
[n] L. Rybarcyk, K. F. Johnson, and B. Blind, “Transport of LANSCE-Linac Beam to Proposed Materials Test Station”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP055, pp. 171-173.
[n] S. Yaramyshev, U. Ratzinger, W. Barth, L. Groening, and L. A. Dahl, “Long-Term Perspective for the UNILAC as a High-Current, Heavy-Ion Injector for the FAIR-Accelerator Complex”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP059, pp. 180-182.
[n] O. I. Meshkov et al., “The Study of the Beam TAILS with the Optical Coronagraph”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT108, pp. 2736-2738.
[n] A. Schempp et al., “Status of the Frankfurt Zero-Mode Proton RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3536-3539.
[n] E. Del Core, A. Bosotti, E. Cenni, P. Pierini, and D. Sertore, “Plasma processing of ESS elliptical cavities”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2458-2461. doi:10.18429/JACoW-IPAC2025-WEPS145
[n] D. Rees and W. Roybal, “Collector Failures on 350-MHz, 1.2-MW CW Klystrons at the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE12, pp. 998-1000.
[n] D.-O. Jeon, C. Chu, and V. V. Danilov, “Transverse Matching Techniques for the SNS Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE059, pp. 3471-3472.
[n] M. Ferianis, “Timing and Synchronization in Large-Scale Linear Accelerators”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH2002, pp. 536-540.
[n] S. Funkner et al., “Reconstructing wake functions using Haissinski distributions from multiple bunch charges”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2419-2422. doi:10.18429/JACoW-IPAC2025-WEPS102
[n] R. E. Laxdal, “Initial Commissioning Results from the ISAC-II SC Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH1003, pp. 521-525.
[n] F. Donoso et al., “Longitudinal phase space density tomography constrained by the Vlasov-Fokker-Planck equation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2350-2353. doi:10.18429/JACoW-IPAC2024-WEPG55
[n] B. Spoelstra, R. Fernandez Bautista, J. Kampp, A. Martinez Landete, M. Sosin, and I. Ustenko, “An automated production test suite for capacitive alignment sensor conditioning electronics”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6120, unpublished.
[n] L. Rybarcyk, “Possible Upgrade Paths for the LANSCE H- Injector”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP037, pp. 330-332.
[n] M. Suminski, I. Kozsar, J. Palluel, and M. Lipinski, “Evolution of White Rabbit network for large-scale deployment at CERN”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 664-669. doi:10.18429/JACoW-ICALEPCS2025-TUPD070
[n] B. Surrow, A. Deshpande, and J. Pasukonis, “eRHIC Detector Design Studies - Implications and Constraints on the ep(A) Interaction-Region Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP049, pp. 3043-3045.
[n] F. J. C. Wenander, R. Scrivens, D. Kuchler, T. Meinschad, and M. B. Jensen, “A Proposal for Post Acceleration, Matching and Measuring the H- Ion Beam at CERN's Linac 4 Test Stand”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP042, pp. 343-345.
[n] M. Kalinowski et al., “The integration of custom radiation tolerant electronics in industrial control systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1311-1318. doi:10.18429/JACoW-ICALEPCS2025-THAR001
For LaTeX
Use Complete Form
For BibTeX
References
- W. Fu, J. Morris, and S. Nemesure, “Asynchronous Data Change Notification between Database Server and Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN021, pp. 144-146.
- K. D. Jacobs et al., “The MIT-BATES South Hall Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 362-365.
- V. Miltchev, D. Riebesehl, J. Rossbach, M. Trunk, and O. Stein, “SALOME: An Accelerator for the Practical Course in Accelerator Physics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2235-2237.
- T. A. Miller et al., “Current Measurement and Associated Machine Protection in the ERL at BNL”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 52-57.
- C. Chu and T. A. Pelaia, “Beam Trajectory Correction for SNS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT015, pp. 1425-1427.
- A. Schempp, M. Ferch, and H. Klein, “A Light Ion Four Rod RFQ Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 267-270.
- A. V. Otboev and E. A. Perevedentsev, “A Model of Self-consistent Transverse Distribution of Colliding Bunches”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2B05, pp. 1214-1216.
- D. Giove et al., “A High Voltage Extractor with Photocathodes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP02F, pp. 1133-1135.
- B. Newnam, “XUV Free-Electron Laser Development at Los Alamos”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE2-03, pp. 290-294.
- O. I. Meshkov et al., “OPTICAL DIAGNOSTIC OF THE VEPP-4M COLLIDER”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHO02, pp. XX-XX.
- K. Takayama, “Beam Break-Up and Resistive Wall Instability in a Steady-State Free Electron Laser in the Microwave Regime”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-06, pp. 318-321.
- A. Schempp et al., “Zero-Mode-RFQ Development in Frankfurt”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0006, pp. 100-102.
- V. G. Dudnikov et al., “Saddle Antenna RF Ion Sources for Efficient Positive and Negative Ions Production”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4060-4062.
- P. Gurd, G. Lawson, D. H. Thompson, and E. Williams, “The Application of Linux Soft IOCs for Status Summaries at the Spallation Neutron Source”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_102.
- D. Curry, J. Dedic, and D. H. Thompson, “Firmware Development for SNS New Timing Master”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP087, pp. 4162-4164.
- S. Schreiber, K. Honkavaara, Ph. Piot, and D. Sertore, “Bunch Length Measurements at the TESLA Test Facility Using a Streak Camera”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH110, pp. 2341-2343.
- A. Schempp, H. Klein, K. H. Pape, P. Schastok, and S. H. Wang, “The HERA RFQ”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 361-364.
- C. K. Allen et al., “A Modular On-line Simulator for Model Reference Control of Charged Particle Beams”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG033, pp. 3527-3529.
- W. Fu, T. D, D. M. Gassner, J. Morris, and S. Nemesure, “Quick Setup of Unit Test For Accelerator Controls System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP247, pp. 574-576.
- I. A. Koop et al., “Concept for a Polarised Electron-Proton Collider with 15-30 GeV c.m. Energy and 1033 cm-2s-1 Luminosity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH043, pp. 3320-3322.
- A. Schempp et al., “Performance of the DESY RFQs”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 587-590.
- M. Kuntzsch et al., “CW Beam Stability Analysis in Time and Frequency Domain”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD15, pp. 179-181.
- I. M. Zemlyansky et al., “Electron and Positron Beams Transportation Channels to BINP Colliders”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper FRCA03, pp. 462-464.
- S. M. Cousineau et al., “Development of Injection and Optics Control Applications for the SNS Accumulator Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT166, pp. 2849-2851.
- Y. W. Kang et al., “Construction, Test, and Operation of a new RFQ at the Spallation Neutron Source (SNS)”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1113-1116.
- H. Hayano, “Cryomodule Test Facilities and Multicell Cavity Performance for the ILC”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TH1002, pp. 516-520.
- C. Sibley III, D. J. Armstrong, A. Jones, T. A. Justice, and D. H. Thompson, “The SNS Machine Protection System: Early Commissioning Results and Future Plans”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE021, pp. 1727-1729.
- I. M. Zemlyansky et al., “Commissioning of e+/e- Transfer Line from BINP Injection Complex to VEPP-2000 Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 213-215.
- L. Rybarcyk, K. F. Johnson, and B. Blind, “Transport of LANSCE-Linac Beam to Proposed Materials Test Station”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP055, pp. 171-173.
- S. Yaramyshev, U. Ratzinger, W. Barth, L. Groening, and L. A. Dahl, “Long-Term Perspective for the UNILAC as a High-Current, Heavy-Ion Injector for the FAIR-Accelerator Complex”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP059, pp. 180-182.
- O. I. Meshkov et al., “The Study of the Beam TAILS with the Optical Coronagraph”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT108, pp. 2736-2738.
- A. Schempp et al., “Status of the Frankfurt Zero-Mode Proton RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3536-3539.
- E. Del Core, A. Bosotti, E. Cenni, P. Pierini, and D. Sertore, “Plasma processing of ESS elliptical cavities”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS145, pp. 2458-2461.
- D. Rees and W. Roybal, “Collector Failures on 350-MHz, 1.2-MW CW Klystrons at the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE12, pp. 998-1000.
- D.-O. Jeon, C. Chu, and V. V. Danilov, “Transverse Matching Techniques for the SNS Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE059, pp. 3471-3472.
- M. Ferianis, “Timing and Synchronization in Large-Scale Linear Accelerators”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TH2002, pp. 536-540.
- S. Funkner et al., “Reconstructing wake functions using Haissinski distributions from multiple bunch charges”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS102, pp. 2419-2422.
- R. E. Laxdal, “Initial Commissioning Results from the ISAC-II SC Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TH1003, pp. 521-525.
- F. Donoso et al., “Longitudinal phase space density tomography constrained by the Vlasov-Fokker-Planck equation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG55, pp. 2350-2353.
- B. Spoelstra, R. Fernandez Bautista, J. Kampp, A. Martinez Landete, M. Sosin, and I. Ustenko, “An automated production test suite for capacitive alignment sensor conditioning electronics”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6120, this conference.
- L. Rybarcyk, “Possible Upgrade Paths for the LANSCE H- Injector”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP037, pp. 330-332.
- M. Suminski, I. Kozsar, J. Palluel, and M. Lipinski, “Evolution of White Rabbit network for large-scale deployment at CERN”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 664-669.
- B. Surrow, A. Deshpande, and J. Pasukonis, “eRHIC Detector Design Studies - Implications and Constraints on the ep(A) Interaction-Region Design”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP049, pp. 3043-3045.
- F. J. C. Wenander, R. Scrivens, D. Kuchler, T. Meinschad, and M. B. Jensen, “A Proposal for Post Acceleration, Matching and Measuring the H- Ion Beam at CERN's Linac 4 Test Stand”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP042, pp. 343-345.
- M. Kalinowski et al., “The integration of custom radiation tolerant electronics in industrial control systems”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1311-1318.
Back to search