Reference Search

Favourites

For Word

[n]	T. Stadlbauer, A. Chmielinska, L. Ducimeti?¿re, D. Kontelis, T. Kramer, and V. Senaj, “DC Testing and Phase Resolved Partial Discharge Measurements of the New Trigger Transformers for the LHC Beam Dump Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3998-4000. doi:10.18429/JACoW-IPAC2019-THPRB079

[n]	D. Capatina, “Photon Beam Applied as Heat Flux on Irregular Surfaces in FEA”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 214-216. doi:10.18429/JACoW-MEDSI2018-WEPH07

[n]	M. F. Vorogushin, V. Glukhikh, B. Tronov, Yu. P. Vakhrushin and D. V. Efremov, “Status of Cyclotron Design in the Efremov Institute”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper C-08, pp. 132-135. 

[n]	W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and G. M. Wang, “NSLS2 Fill Pattern Monitor and Control”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 246-250. doi:10.18429/JACoW-IBIC2015-MOPB082

[n]	A. Basu, S. K. Gupta, S. B. V. Nagraju, P. Singh, and S. Singh, “Qt Based Control System Software for Low Energy Accelerator Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD33, pp. 206-207. 

[n]	J. D. Hepburn, J. D. Walsh, and E. H. Williams, “Beam Probes for the Chalk River Superconducting Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1880-1883. 

[n]	W. Schappert, “Resonance Control for Future Linear Accelerators”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 363-367. doi:10.18429/JACoW-LINAC2016-TU2A03

[n]	M. H. Nasr and S. G. Tantawi, “The Design and Construction of a Novel Dual-Mode Dual-Frequency Linac Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4391-4394. doi:10.18429/JACoW-IPAC2018-THPMK048

[n]	I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322. 

[n]	F. B. Lockwood Estrin, J. W. Bradley, R. Valizadeh, A. N. Hannah, G. B. G. Stenning, and E. Seiler, “Using HiPIMS to Deposit V3Si Superconducting Thin Films”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPFDV009, pp.. 

[n]	B. Carlsten, E. Simakov, M. Gulley, N. A. Moody, and S. Russell, “Future Los Alamos Neutron Science Center (LANSCE) Directions and Enabling R&D Studies”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM014, unpublished. 

[n]	G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360. 

[n]	V. Pavlenko, E. Montgomery, and H. Bhandari, “Technology transfer case study: Industrialized manufacturing of high quality photocathode thin films.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUUD3, unpublished. 

For LaTeX

%\cite{Stadlbauer:IPAC19-THPRB079} \bibitem{Stadlbauer:IPAC19-THPRB079} T. Stadlbauer, A. Chmielinska, L. Ducimeti?¿re, D. Kontelis, T. Kramer, and V. Senaj, \textquotedblleft{DC Testing and Phase Resolved Partial Discharge Measurements of the New Trigger Transformers for the LHC Beam Dump Kickers}\textquotedblright, in \emph{Proc. IPAC’19}, Melbourne, Australia, May 2019, pp. 3998--4000. \doi{10.18429/JACoW-IPAC2019-THPRB079} %\cite{Capatina:MEDSI18-WEPH07} \bibitem{Capatina:MEDSI18-WEPH07} D. Capatina, \textquotedblleft{Photon Beam Applied as Heat Flux on Irregular Surfaces in FEA}\textquotedblright, in \emph{Proc. MEDSI’18}, Paris, France, Jun. 2018, pp. 214--216. \doi{10.18429/JACoW-MEDSI2018-WEPH07} %\cite{Vorogushin:Cyclotrons95-C-08} \bibitem{Vorogushin:Cyclotrons95-C-08} M. F. Vorogushin, V. Glukhikh, B. Tronov, Yu. P. Vakhrushin and D. V. Efremov, \textquotedblleft{Status of Cyclotron Design in the Efremov Institute}\textquotedblright, in \emph{Proc. Cyclotrons’95}, Cape Town, South Africa, Oct. 1995, paper C--08, pp. 132--135. %\cite{Cheng:IBIC15-MOPB082} \bibitem{Cheng:IBIC15-MOPB082} W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and G. M. Wang, \textquotedblleft{NSLS2 Fill Pattern Monitor and Control}\textquotedblright, in \emph{Proc. IBIC’15}, Melbourne, Australia, Sep. 2015, pp. 246--250. \doi{10.18429/JACoW-IBIC2015-MOPB082} %\cite{Basu:PCaPAC12-THPD33} \bibitem{Basu:PCaPAC12-THPD33} A. Basu, S. K. Gupta, S. B. V. Nagraju, P. Singh, and S. Singh, \textquotedblleft{Qt Based Control System Software for Low Energy Accelerator Facility}\textquotedblright, in \emph{Proc. PCaPAC’12}, Kolkata, India, Dec. 2012, paper THPD33, pp. 206--207. %\cite{Hepburn:PAC85} \bibitem{Hepburn:PAC85} J. D. Hepburn, J. D. Walsh, and E. H. Williams, \textquotedblleft{Beam Probes for the Chalk River Superconducting Cyclotron}\textquotedblright, in \emph{Proc. PAC’85}, Vancouver, Canada, May 1985, pp. 1880--1883. %\cite{Schappert:LINAC16-TU2A03} \bibitem{Schappert:LINAC16-TU2A03} W. Schappert, \textquotedblleft{Resonance Control for Future Linear Accelerators}\textquotedblright, in \emph{Proc. LINAC’16}, East Lansing, MI, USA, Sep. 2016, pp. 363--367. \doi{10.18429/JACoW-LINAC2016-TU2A03} %\cite{Nasr:IPAC18-THPMK048} \bibitem{Nasr:IPAC18-THPMK048} M. H. Nasr and S. G. Tantawi, \textquotedblleft{The Design and Construction of a Novel Dual-Mode Dual-Frequency Linac Design}\textquotedblright, in \emph{Proc. IPAC’18}, Vancouver, Canada, Apr.-May 2018, pp. 4391--4394. \doi{10.18429/JACoW-IPAC2018-THPMK048} %\cite{Podadera:DIPAC11-TUPD11} \bibitem{Podadera:DIPAC11-TUPD11} I. Podadera \emph{et al.}, \textquotedblleft{Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench}\textquotedblright, in \emph{Proc. DIPAC’11}, Hamburg, Germany, May 2011, paper TUPD11, pp. 320--322. %\cite{Lockwood Estrin:SRF21-WEPFDV009} \bibitem{Lockwood Estrin:SRF21-WEPFDV009} F. B. Lockwood Estrin, J. W. Bradley, R. Valizadeh, A. N. Hannah, G. B. G. Stenning, and E. Seiler, \textquotedblleft{Using HiPIMS to Deposit V3Si Superconducting Thin Films}\textquotedblright, in \emph{Proc. SRF’21}, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPFDV009, pp.. %\cite{Carlsten:IPAC23-TUPM014} \bibitem{Carlsten:IPAC23-TUPM014} B. Carlsten, E. Simakov, M. Gulley, N. A. Moody, and S. Russell, \textquotedblleft{Future Los Alamos Neutron Science Center (LANSCE) Directions and Enabling R&D Studies}\textquotedblright, presented at the IPAC’23, Venice, Italy, May 2023, paper TUPM014, unpublished. %\cite{Ferioli:EPAC00-MOP6B14} \bibitem{Ferioli:EPAC00-MOP6B14} G. Ferioli, L. Jensen, and G. Vismara, \textquotedblleft{Protection and Diagnostic Systems for High Intensity Beams}\textquotedblright, in \emph{Proc. EPAC’00}, Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358--360. %\cite{Pavlenko:IPAC24-TUUD3} \bibitem{Pavlenko:IPAC24-TUUD3} V. Pavlenko, E. Montgomery, and H. Bhandari, \textquotedblleft{Technology transfer case study: Industrialized manufacturing of high quality photocathode thin films.}\textquotedblright, presented at the IPAC’24, Nashville, TN, USA, May 2024, paper TUUD3, unpublished.

For BibTeX

@inproceedings{stadlbauer:ipac19-thprb079, author = {T. Stadlbauer and A. Chmielinska and L. Ducimeti?¿re and D. Kontelis and T. Kramer and V. Senaj}, title = {{DC Testing and Phase Resolved Partial Discharge Measurements of the New Trigger Transformers for the LHC Beam Dump Kickers}}, booktitle = {Proc. IPAC'19}, pages = {3998--4000}, paper = {THPRB079}, venue = {Melbourne, Australia, May 2019}, publisher = {JACoW Publishing, Geneva, Switzerland}, doi = {10.18429/JACoW-IPAC2019-THPRB079}, url = {http://accelconf.web.cern.ch/ipac2019/papers/THPRB079.pdf}, language = {english} } @inproceedings{capatina:medsi18-weph07, author = {D. Capatina}, title = {{Photon Beam Applied as Heat Flux on Irregular Surfaces in FEA}}, booktitle = {Proc. MEDSI'18}, pages = {214--216}, paper = {WEPH07}, venue = {Paris, France, Jun. 2018}, publisher = {JACoW Publishing, Geneva, Switzerland}, doi = {10.18429/JACoW-MEDSI2018-WEPH07}, url = {https://jacow.org/medsi2018/papers/WEPH07.pdf}, language = {english} } @inproceedings{vorogushin:cyclotrons95-c-08, author = {M. F. Vorogushin and V. Glukhikh and B. Tronov and Yu. P. Vakhrushin and D. V. Efremov}, title = {{Status of Cyclotron Design in the Efremov Institute}}, booktitle = {Proc. Cyclotrons'95}, pages = {132--135}, paper = {C-08}, venue = {Cape Town, South Africa, Oct. 1995}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/c95/papers/C-08.pdf}, language = {english} } @inproceedings{cheng:ibic15-mopb082, author = {W. X. Cheng and B. Bacha and Y. Hu and O. Singh and G. M. Wang}, title = {{NSLS2 Fill Pattern Monitor and Control}}, booktitle = {Proc. IBIC'15}, pages = {246--250}, paper = {MOPB082}, venue = {Melbourne, Australia, Sep. 2015}, publisher = {JACoW Publishing, Geneva, Switzerland}, doi = {10.18429/JACoW-IBIC2015-MOPB082}, url = {https://jacow.org/IBIC2015/papers/MOPB082.pdf}, language = {english} } @inproceedings{basu:pcapac12-thpd33, author = {A. Basu and S. K. Gupta and S. B. V. Nagraju and P. Singh and S. Singh}, title = {{Qt Based Control System Software for Low Energy Accelerator Facility}}, booktitle = {Proc. PCaPAC'12}, pages = {206--207}, paper = {THPD33}, venue = {Kolkata, India, Dec. 2012}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/pcapac2012/papers/THPD33.pdf}, language = {english} } @inproceedings{hepburn:pac85, author = {J. D. Hepburn and J. D. Walsh and E. H. Williams}, title = {{Beam Probes for the Chalk River Superconducting Cyclotron}}, booktitle = {Proc. PAC'85}, pages = {1880--1883}, paper = {}, venue = {Vancouver, Canada, May 1985}, publisher = {JACoW Publishing, Geneva, Switzerland}, language = {english} } @inproceedings{schappert:linac16-tu2a03, author = {W. Schappert}, title = {{Resonance Control for Future Linear Accelerators}}, booktitle = {Proc. LINAC'16}, pages = {363--367}, paper = {TU2A03}, venue = {East Lansing, MI, USA}, series = {Linear Accelerator Conference}, number = {28}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {5}, year = {2017}, isbn = {978-3-95-450169-4}, doi = {10.18429/JACoW-LINAC2016-TU2A03}, url = {https://jacow.org/linac2016/papers/TU2A03.pdf}, language = {english} } @inproceedings{nasr:ipac18-thpmk048, author = {M. H. Nasr and S. G. Tantawi}, title = {{The Design and Construction of a Novel Dual-Mode Dual-Frequency Linac Design}}, booktitle = {Proc. IPAC'18}, pages = {4391--4394}, paper = {THPMK048}, venue = {Vancouver, Canada, Apr.-May 2018}, publisher = {JACoW Publishing, Geneva, Switzerland}, doi = {10.18429/JACoW-IPAC2018-THPMK048}, url = {http://accelconf.web.cern.ch/ipac2018/papers/THPMK048.pdf}, language = {english} } @inproceedings{podadera:dipac11-tupd11, author = {I. Podadera and others}, title = {{Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench}}, booktitle = {Proc. DIPAC'11}, pages = {320--322}, paper = {TUPD11}, venue = {Hamburg, Germany, May 2011}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/DIPAC2011/papers/TUPD11.pdf}, language = {english} } @inproceedings{lockwood estrin:srf21-wepfdv009, author = {F. B. Lockwood Estrin and J. W. Bradley and R. Valizadeh and A. N. Hannah and G. B. G. Stenning and E. Seiler}, title = {{Using HiPIMS to Deposit V3Si Superconducting Thin Films}}, booktitle = {Proc. SRF'21}, pages = {}, paper = {WEPFDV009}, venue = {East Lansing, MI, USA}, series = {International Conference on RF Superconductivity}, number = {20}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {10}, year = {2022}, issn = {2673-5504}, isbn = {978-3-95-450233-2}, language = {english} } @unpublished{carlsten:ipac23-tupm014, author = {B. Carlsten and E. Simakov and M. Gulley and N. A. Moody and S. Russell}, title = {{Future Los Alamos Neutron Science Center (LANSCE) Directions and Enabling R&D Studies}}, booktitle = {Proc. IPAC'23}, pages = {}, paper = {TUPM014}, venue = {Venice, Italy}, intype = {presented at the}, series = {International Particle Accelerator Conference}, number = {14}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {9}, year = {2023}, issn = {2673-5490}, isbn = {978-3-95-450231-8}, note = {presented at IPAC'23, Venice, Italy, May 2023, paper TUPM014, unpublished}, language = {english} } @inproceedings{ferioli:epac00-mop6b14, author = {G. Ferioli and L. Jensen and G. Vismara}, title = {{Protection and Diagnostic Systems for High Intensity Beams}}, booktitle = {Proc. EPAC'00}, pages = {358--360}, paper = {MOP6B14}, venue = {Vienna, Austria}, series = {European Particle Accelerator Conference}, number = {7}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {8}, year = {2000}, url = {https://jacow.org/e00/papers/MOP6B14.pdf}, language = {english} } @unpublished{pavlenko:ipac24-tuud3, author = {V. Pavlenko and E. Montgomery and H. Bhandari}, title = {{Technology transfer case study: Industrialized manufacturing of high quality photocathode thin films.}}, booktitle = {Proc. IPAC'24}, pages = {}, paper = {TUUD3}, venue = {Nashville, TN, USA}, intype = {presented at the}, series = {International Particle Accelerator Conference}, number = {15}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {7}, year = {2024}, issn = {2673-5490}, isbn = {978-3-95-450247-9}, note = {presented at IPAC'24, Nashville, TN, USA, May 2024, paper TUUD3, unpublished}, language = {english} }

References

• T. Stadlbauer, A. Chmielinska, L. Ducimeti?¿re, D. Kontelis, T. Kramer, and V. Senaj, “DC Testing and Phase Resolved Partial Discharge Measurements of the New Trigger Transformers for the LHC Beam Dump Kickers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3998-4000.
• D. Capatina, “Photon Beam Applied as Heat Flux on Irregular Surfaces in FEA”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 214-216.
• M. F. Vorogushin, V. Glukhikh, B. Tronov, Yu. P. Vakhrushin and D. V. Efremov, “Status of Cyclotron Design in the Efremov Institute”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper C-08, pp. 132-135.
• W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and G. M. Wang, “NSLS2 Fill Pattern Monitor and Control”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 246-250.
• A. Basu, S. K. Gupta, S. B. V. Nagraju, P. Singh, and S. Singh, “Qt Based Control System Software for Low Energy Accelerator Facility”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD33, pp. 206-207.
• J. D. Hepburn, J. D. Walsh, and E. H. Williams, “Beam Probes for the Chalk River Superconducting Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1880-1883.
• W. Schappert, “Resonance Control for Future Linear Accelerators”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 363-367.
• M. H. Nasr and S. G. Tantawi, “The Design and Construction of a Novel Dual-Mode Dual-Frequency Linac Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4391-4394.
• I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
• F. B. Lockwood Estrin, J. W. Bradley, R. Valizadeh, A. N. Hannah, G. B. G. Stenning, and E. Seiler, “Using HiPIMS to Deposit V3Si Superconducting Thin Films”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPFDV009, pp..
• B. Carlsten, E. Simakov, M. Gulley, N. A. Moody, and S. Russell, “Future Los Alamos Neutron Science Center (LANSCE) Directions and Enabling R&D Studies”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM014, unpublished.
• G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360.
• V. Pavlenko, E. Montgomery, and H. Bhandari, “Technology transfer case study: Industrialized manufacturing of high quality photocathode thin films.”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUUD3, unpublished.