Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Huang, Z. G. He, Q. K. Jia, Y. Lu, and L. Wang, “Initial Design on the High Quality Electron Beam for the Hefei Advanced Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4605-4607. doi:10.18429/JACoW-IPAC2018-THPMK123
[n] R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Metallic Photonic Band Gap Accelerator Structure Experiments and Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP151, pp. 2841-2843.
[n] J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3744-3747. doi:10.18429/JACoW-IPAC2014-THPME197
[n] V. A. Lebedev, “Technical Challenges in Multi-MW Proton Linacs”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOI1B03, pp. 20-24.
[n] K. C. Harkay et al., “Beam-Induced Heat Load Predictions and Measurements in the APS Superconducting Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM06, pp. 1055-1057.
[n] M. S. Jaski et al., “Fast-Switching Variably Polarizing Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM08, pp. 1061-1063.
[n] D. Alesini et al., “The New C Band Gun for the Next Generation RF Photo-Injectors”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 679-682. doi:10.18429/JACoW-IPAC2022-MOPOMS021
[n] Y. S. Cho, J. H. Jang, Y. H. Kim, H. J. Kwon, and C. B. Shim, “Upgrade Design of PEFP 3MeV RFQ”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21011, pp. XX-XX.
[n] G. B. Christian et al., “PandABlocks - a Flexible Framework for Zynq7000-Based SoC Configuration”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 683. doi:10.18429/JACoW-ICALEPCS2019-TUAPP05
[n] S. Wang and R. Holtzapple, “Single-shot Bunch-by-Bunch Horizontal Beam Size Measurements using a Gated Camera at CesrTA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 364-367. doi:10.18429/JACoW-IPAC2016-MOPMR052
[n] R. Rybaniec et al., “Real-time Estimation of Superconducting Cavities Parameters”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2456-2458. doi:10.18429/JACoW-IPAC2014-WEPME075
[n] G. I. Bell et al., “Simulating dynamical friction in wiggler-based high-energy electron coolers, including finite-time effects”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBY05, pp. XX-XX.
[n] K. C. Harkay et al., “Radiation Safety Considerations For The APS Upgrade Injector”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 445-448. doi:10.18429/JACoW-IPAC2021-MOPAB123
[n] A.-L. Perrot et al., “Configuration management of the CERN accelerators complex on the road to long shutdown 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 579-581. doi:10.18429/JACoW-IPAC2023-MOPL028
[n] K. Rathsman et al., “The RF Power Source for the High Beta Elliptical Cavities of the ESS Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC136, pp. 397-399.
[n] A. K. Barladyan et al., “Integer Spin Resonance Crossing With Preserving Beam Polarization on VEPP-4M”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4451-4453. doi:10.18429/JACoW-IPAC2017-THPVA017
For LaTeX
Use Complete Form
For BibTeX
References
- R. Huang, Z. G. He, Q. K. Jia, Y. Lu, and L. Wang, “Initial Design on the High Quality Electron Beam for the Hefei Advanced Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4605-4607.
- R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Metallic Photonic Band Gap Accelerator Structure Experiments and Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP151, pp. 2841-2843.
- J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3744-3747.
- V. A. Lebedev, “Technical Challenges in Multi-MW Proton Linacs”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOI1B03, pp. 20-24.
- K. C. Harkay et al., “Beam-Induced Heat Load Predictions and Measurements in the APS Superconducting Undulator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM06, pp. 1055-1057.
- M. S. Jaski et al., “Fast-Switching Variably Polarizing Undulator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM08, pp. 1061-1063.
- D. Alesini et al., “The New C Band Gun for the Next Generation RF Photo-Injectors”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 679-682.
- Y. S. Cho, J. H. Jang, Y. H. Kim, H. J. Kwon, and C. B. Shim, “Upgrade Design of PEFP 3MeV RFQ”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21011, pp. XX-XX.
- G. B. Christian et al., “PandABlocks - a Flexible Framework for Zynq7000-Based SoC Configuration”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 683.
- S. Wang and R. Holtzapple, “Single-shot Bunch-by-Bunch Horizontal Beam Size Measurements using a Gated Camera at CesrTA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 364-367.
- R. Rybaniec et al., “Real-time Estimation of Superconducting Cavities Parameters”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2456-2458.
- G. I. Bell et al., “Simulating dynamical friction in wiggler-based high-energy electron coolers, including finite-time effects”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBY05, pp. XX-XX.
- K. C. Harkay et al., “Radiation Safety Considerations For The APS Upgrade Injector”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 445-448.
- A.-L. Perrot et al., “Configuration management of the CERN accelerators complex on the road to long shutdown 3”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL028, pp. 579-581.
- K. Rathsman et al., “The RF Power Source for the High Beta Elliptical Cavities of the ESS Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC136, pp. 397-399.
- A. K. Barladyan et al., “Integer Spin Resonance Crossing With Preserving Beam Polarization on VEPP-4M”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4451-4453.
Back to search