Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Calvey et al., “CesrTA Retarding Field Analyzer Measurements in Drifts, Dipoles, Quadrupoles and Wigglers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD023, pp. 1973-1975.
[n] J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400.
[n] M. Scholz, B. Faatz, M. Vogt, and J. Zemella, “Optics Measurements at FLASH2”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP073, pp. 902-904.
[n] N. F. Petry, K. K??mpel, S. Lamprecht, O. Meusel, H. Podlech, and M. Schwarz, “Cavity R&D for HBS Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1520-1522. doi:10.18429/JACoW-IPAC2022-TUPOMS042
[n] M. Tanaka, E. J. Bleser, J. W. Glenn, Y. Y. Lee, and A. Soukas, “The AGS Accelerator Complex with the New Fast Extraction System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR13, pp. 1930-1932.
[n] C.-Y. Liu, Y.-C. Chien, J.-P. Chiou, C.-S. Fann, and J.-T. Sheu, “Design and Implementation of the High Performance Thyratron Tube Driver”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE070, pp. 2646-2648.
[n] F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1047-1048. doi:10.18429/JACoW-ICALEPCS2015-WEPGF146
[n] K. N. Sjobak, A. Grudiev, and E. Adli, “New Criterion for Shape Optimization of Normal-Conducting Accelerator Cells for High-Gradient Applications”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP028, pp. 114-116.
[n] E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2781-2784. doi:10.18429/JACoW-IPAC2023-WEPA054
[n] D. Malyutin and A. N. Matveenko, “Electron Beam Probe Diagnostic for BESSY II Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-IBIC2016-MOPG53
[n] S. Igarashi et al., “Beam Profile Measurement using Flying Wire Monitors at the J-PARC Main Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC098, pp. 1239-1241.
[n] M. Schuett, C. M. Kleffner, K. Knie, and U. Ratzinger, “The 325 MHz FAIR pLinac Ladder RFQ - Final Assembly for Commissioning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 82-85. doi:10.18429/JACoW-IPAC2022-MOPOST014
[n] M. Cavenago, T. Kulevoy, V. Stolbunov, and A. Vassiliev, “Installation and Operation of an ECR Ion Source and its Platform in Legnaro”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP035L, pp. 1487-1489.
[n] F. Q. Zhang, T. Adachi, H. Someya, and H. Sato, “Phase Synchronization of Multi-Network System for Resonant Excitation of the JHF 3-GeV Booster Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA158, pp. 3752-3754.
[n] S. A. Kahn et al., “Integrating the MANX 6-D Muon Cooling Experiment with the MICE Spectrometers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP095, pp. 2727-2729.
[n] R. Petkus, “Control System Network Architecture at NSLS-II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP007, pp. XX-XX.
[n] Yu-Seok Kim, “DESIGN OF KIRAMS-13 CYCLOTRON CONTROL SYSTEM”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P13, pp. XX-XX.
[n] T. Ohshima, N. Hosoda, H. Maesaka, S. Matsubara, Y. Otake, and M. Yamaga, “Correction of Phase and Amplitude Error of RF Modulator and Demodulator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP023, pp. 453-455.
[n] J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
[n] H. S. Kang et al., “Beam Acceleration Results of Test Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D028, pp. 743-745.
[n] V. Gostishchev et al., “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH075, pp. 202-204.
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Calvey et al., “CesrTA Retarding Field Analyzer Measurements in Drifts, Dipoles, Quadrupoles and Wigglers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD023, pp. 1973-1975.
- J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400.
- M. Scholz, B. Faatz, M. Vogt, and J. Zemella, “Optics Measurements at FLASH2”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP073, pp. 902-904.
- N. F. Petry, K. K??mpel, S. Lamprecht, O. Meusel, H. Podlech, and M. Schwarz, “Cavity R&D for HBS Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1520-1522.
- M. Tanaka, E. J. Bleser, J. W. Glenn, Y. Y. Lee, and A. Soukas, “The AGS Accelerator Complex with the New Fast Extraction System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR13, pp. 1930-1932.
- C.-Y. Liu, Y.-C. Chien, J.-P. Chiou, C.-S. Fann, and J.-T. Sheu, “Design and Implementation of the High Performance Thyratron Tube Driver”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE070, pp. 2646-2648.
- F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1047-1048.
- K. N. Sjobak, A. Grudiev, and E. Adli, “New Criterion for Shape Optimization of Normal-Conducting Accelerator Cells for High-Gradient Applications”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP028, pp. 114-116.
- E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA054, pp. 2781-2784.
- D. Malyutin and A. N. Matveenko, “Electron Beam Probe Diagnostic for BESSY II Storage Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- S. Igarashi et al., “Beam Profile Measurement using Flying Wire Monitors at the J-PARC Main Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC098, pp. 1239-1241.
- M. Schuett, C. M. Kleffner, K. Knie, and U. Ratzinger, “The 325 MHz FAIR pLinac Ladder RFQ - Final Assembly for Commissioning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 82-85.
- M. Cavenago, T. Kulevoy, V. Stolbunov, and A. Vassiliev, “Installation and Operation of an ECR Ion Source and its Platform in Legnaro”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP035L, pp. 1487-1489.
- F. Q. Zhang, T. Adachi, H. Someya, and H. Sato, “Phase Synchronization of Multi-Network System for Resonant Excitation of the JHF 3-GeV Booster Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA158, pp. 3752-3754.
- S. A. Kahn et al., “Integrating the MANX 6-D Muon Cooling Experiment with the MICE Spectrometers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP095, pp. 2727-2729.
- R. Petkus, “Control System Network Architecture at NSLS-II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP007, pp. XX-XX.
- Yu-Seok Kim, “DESIGN OF KIRAMS-13 CYCLOTRON CONTROL SYSTEM”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P13, pp. XX-XX.
- T. Ohshima, N. Hosoda, H. Maesaka, S. Matsubara, Y. Otake, and M. Yamaga, “Correction of Phase and Amplitude Error of RF Modulator and Demodulator”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP023, pp. 453-455.
- J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
- H. S. Kang et al., “Beam Acceleration Results of Test Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D028, pp. 743-745.
- V. Gostishchev et al., “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH075, pp. 202-204.
Back to search