JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Bai et al., “RHIC Vertical AC Dipole Commissioning”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE040, pp. 1115-1117. 
[n]	N. Orr et al., “On Line Isotopic Separator Test Benches at GANIL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1792-1795. 
[n]	E. R. Beadle, “A 2 MHz 3-Port Analog Isolation and Fanout Module”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB08, pp. 2545-2547. 
[n]	A. Devred et al., “Time Decay Measurements of the Sextupole Component of the Magnetic Field in a 4-cm Aperture, 17-m-long SSC Dipole Magnet Prototype”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2480-2483. 
[n]	J. N. Weaver, J. Sebek, H. Morales, P. Golceff, and R. D. Genin, “Experience with a Radio Frequency Gun on the SSRL Injector Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3018-3021. 
[n]	R. Hettel et al., “Digital Orbit Feedback Control for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ22, pp. 2717-2719. 
[n]	T. J. Shea, M. C. Grau, P. R. Cameron, W. A. Ryan, and R. E. Sikora, “RHIC Beam Position Monitor Assemblies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2328-2331. 
[n]	Y. K. Kim, “Towards the Globatron for Tomorrow”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper TUXX02, unpublished. 
[n]	S. Y. Lee and J. M. Wang, “Microwave Instability Across the Transition Energy”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2323-2326. 
[n]	A. R. Bainbridge, A. G. Hinton, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Construction and Measurement of a Tuneable Permanent Magnet Quadrupole for Diamond Light Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2424-2427. doi:10.18429/JACoW-IPAC2022-THOYSP1
[n]	M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872. 
[n]	G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3024-3027. 
[n]	J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2444-2447. 
[n]	C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616. 
[n]	R. Miyamoto, M. Cattin, J. Serrano, and R. Tom?ís, “Signal Quality of the LHC AC Dipoles and its Impact on Beam Dynamics”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE083, pp. 4716-4718. 
[n]	M. Barnes et al., “Initial operational experience of an LHC injection kicker magnet upgraded for HL-LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1080-1083. doi:10.18429/JACoW-IPAC2024-TUPC36
[n]	J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B010, pp. 461-463. 
[n]	C. Pearson et al., “Development of Multimegawatt Klystrons for Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1106-1109. 
[n]	A. Denker et al., “Status of the VE-RFQ Injector for the ISL Cyclotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP20C, pp. 711-712. 
[n]	F. Hoguin, S. Deghaye, R. Gorbonosov, J. Lauener, and P. Mantion, “Distributed Transactions in CERNÔÇÖs Accelerator Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 468-472. doi:10.18429/JACoW-ICALEPCS2021-TUPV033
[n]	P. Charrue and H. Schmickler, “The Status of the LHC Controls System Shortly Before Injection of Beam”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB01, pp. 5-9. 
[n]	J. Corbett, R. Hettel, D. Keeley, and D. Mostowfi, “Digital Orbit Feedback Compensation for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ21, pp. 2714-2716. 
[n]	R. N. Fernandes et al., “Cable Database at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1200. doi:10.18429/JACoW-ICALEPCS2019-WEPHA047
[n]	P. Anisimov, E. Simakov, H. Xu, J. Rosenzweig, J. Maxson, and M. Kaemingk, “Multi-objective genetic optimization of high charge TopGun photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 840-843. doi:10.18429/JACoW-IPAC2024-MOPS55
[n]	H. Eickhoff et al., “The GSI Cancer Therapy Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B008, pp. 3801-3803. 
[n]	A. Hinton et al., “Field measurements of a short period helical superconducting undulator”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1868-1871. doi:10.18429/JACoW-IPAC2025-WEPB057
[n]	A. Chabert et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2802-2805. 
[n]	J. Allinger et al., “A High Field Superconducting Beam Transport in a BNL Primary Proton Beam”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4053-4056. 
[n]	R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495. 
[n]	E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698. 
[n]	J. Kaugerts, P. F. Dahl, I. Polk, and W. Sampson, “ISABELLE Insertion Quadrupoles”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4036-4039. 
[n]	M. Boros, R. N. Fernandes, B. Peceli, and G. Singler, “An EPICS Channel Access Implementation on Siemens PLCs”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 649. doi:10.18429/JACoW-ICALEPCS2019-MOSH3001
[n]	D. Monteiro, R. Barillère, N. Bunijevac, and I. Rühl, “Controls Optimization for Energy Efficient Cooling and Ventilation at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1465-1469. doi:10.18429/JACoW-ICALEPCS2023-THPDP062
[n]	P. G. O'Shea et al., “Accelerator Archeology - The Resurrection of the Stanford MARKIII Electron Linac at Duke”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA17, pp. 1090-1092. 
[n]	I. Bekman et al., “Experience and Prospects of Real-Time Signal Processing and Representation for the Beam Diagnostics at COSY”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 970-972. doi:10.18429/JACoW-ICALEPCS2017-TUPHA213
[n]	C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “A Modified Nomarski Interferometer to Study Supersonic Gas Jet Density Profiles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 385-388. doi:10.18429/JACoW-IPAC2022-MOPOPT054
[n]	T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1353-1356. doi:10.18429/JACoW-IPAC2025-TUPM086
[n]	F. Éozénou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: Gradients Over 40 MV/m Achieved on ESS Single-Cell Cavity”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 844-847. doi:10.18429/JACoW-LINAC2022-THPOGE23
[n]	C. B?Âhme, A. J. Halama, V. Kamerdzhiev, and G. R. Rupsch, “Status Overview of the HESR Beam Instrumentation”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 23-27. doi:10.18429/JACoW-IBIC2022-MOP03
[n]	G. Torrisi et al., “Design and optimization of a C-band RF Pulse Compressor for a VHEE LINAC for FLASH Radiotherapy”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 465-467. doi:10.18429/JACoW-LINAC2024-TUPB069
[n]	V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1653-1656. doi:10.18429/JACoW-IPAC2024-TUPS10
[n]	L. Merminga and J. J. Bisognano, “Energy Stability in a High Average Power FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ11, pp. 2690-2692. 
[n]	O. Napoly, P. Sievers, T. Taylor, and B. Zotter, “Progress on the CLIC Final Focus System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3228-3231. 
[n]	E. R. Beadle, “A General Purpose Fiber Optic Link with Radiation Resistance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB09, pp. 2548-2550. 
[n]	R. N. Fernandes et al., “Management of IOCs at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1205. doi:10.18429/JACoW-ICALEPCS2019-WEPHA048
[n]	M. Mehler, O. Boine-Frankenheim, O. Chorniy, and O. K. Kester, “Longitudinal Dynamics of Intense Heavy-Ion Bunches in SIS-100”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR003, pp. 2937-2939. 
[n]	S. Y. Lee et al., “The RHIC Lattice”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 773-776. 
[n]	M. Ratzlaff and D. Beauregard, “Beam centroid studies at the Canadian Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1243-1245. doi:10.18429/JACoW-IPAC2024-TUPG14
[n]	J. C. Brunet et al., “Mechanical Design and Layout of the LHC Standard Half-Cell”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P013, pp. 3368-3370. 
[n]	C. Yao and Y.-C. Chae, “Electron Multipacting Observation and Simulation in the APS PAR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS112, pp. 3541-3543. 
[n]	E. Colby, “A High Charge, High Duty Factor RF Photoinjector for the Next Generation Linear Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH2006, pp. 758-764. 
[n]	L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 472-475. doi:10.18429/JACoW-LINAC2024-TUPB071
[n]	M. Steck, K. Beckert, P. Beller, B. Franczak, B. Franzke, and F. Nolden, “Improved Performance of the Heavy Ion Storage Ring ESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT016, pp. 1168-1170. 
[n]	V. Bailey, R. Curry, J. P. Lidestri, M. Tiefenback, and D. Wake, “Magnet Design for SLIA Proof-of-Concept Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3123-3126. 
[n]	J. Hetzel et al., “Final preparation of accelerated and polarised protons at COSY Jülich”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1657-1660. doi:10.18429/JACoW-IPAC2024-TUPS12
[n]	M. Veronese et al., “First Operation of the FERMI@Elettra Bunch Length Monitor System”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB41, pp. 486-489. 
[n]	O. Chubenko, “State-of-the-art photocathodes for bright-beam and spin-polarized-beam generation”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 5-9. doi:10.18429/JACoW-LINAC2024-MOZA002
[n]	C. W. Olson, J. M. Paterson, J.-L. Pellegrin, and J. R. Rees, “Operation of the PEP Transverse Beam Feedback”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2296-2299. 
[n]	F. Micolon et al., “Mechanical Consolidation of the LHC Inner Triplet Magnet Supporting System for Remote Alignment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2207-2209. doi:10.18429/JACoW-IPAC2021-TUPAB308
[n]	M. Emamian, N. Hower, and Y. Levashov, “Alignment of Duke Free Electron Laser Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA02, pp. 2081-2083. 
[n]	P. Lebrun and P. H. Garbincius, “Assessing Risk in Costing High-energy Accelerators: from Existing Projects to the Future Linear Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE021, pp. 3392-3394. 
[n]	L. G. Ratner et al., “Commissioning the Polarized Beam in the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1656-1659. 
[n]	P. Bauer et al., “RRR Measurements on Niobium for Superconducting RF Cavities at Fermilab”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP01, pp. 588-590. 
[n]	F. Chautard et al., “GANIL Status Report”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272. 
[n]	V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199. 
[n]	A. Blednykh et al., “Temperature Measurements of the NSLS-II Vacuum Components”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 443-445. doi:10.18429/JACoW-NAPAC2019-TUPLM36
[n]	M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_049. 
[n]	Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX. 
[n]	A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1734-1735. doi:10.18429/JACoW-ICALEPCS2017-THPHA148
[n]	G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286. 
[n]	Y. Jongen et al., “The Proton Therapy System for MGH's NPTC: Equipment Description and Progress Report”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-03, pp. 606-609. 
[n]	J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n]	P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769. 
[n]	G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1251-1253. doi:10.18429/JACoW-IPAC2018-TUPMF003
[n]	C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 67-70. doi:10.18429/JACoW-ECRIS2018-TUB3
[n]	J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323. 
[n]	P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2476-2479. 
[n]	G. P. Boicourt, O. R. Sander, and T. P. Wangler, “Comparison of Simulation with Experiment in an RFQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2562-2565. 
[n]	P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963. 
[n]	N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX. 
[n]	R. J. Noble et al., “The ORION Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG026, pp. 1858-1860. 
[n]	T. Schmidt et al., “First Results of the UE212 Quasiperiodic Elliptical Electromagnetic Undulators at SLS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE024, pp. 2631-2633. 
[n]	S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113. 
[n]	R. C. Gupta et al., “RHIC Insertion Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2239-2242. 
[n]	S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 296. doi:10.18429/JACoW-MEDSI2020-WEPB15
[n]	W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581. 
[n]	B. Higuera Gonzalez, T. Overton, Y. Saveliev, T. Pacey, and G. Xia, “Detailed simulation study of wakefield induced beam dynamics in the dielectric dechirper at CLARA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2210-2213. doi:10.18429/JACoW-IPAC2024-WEPG14
[n]	Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495. 
[n]	A. Olmos et al., “Commissioning of the ALBA Fast Orbit Feedback System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD23, pp. 691-695. 
[n]	A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n]	L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741. 
[n]	A. Hinton et al., “First test results of a short period superconducting helical undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1243-1246. doi:10.18429/JACoW-IPAC2023-MOPM113
[n]	J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580. 
[n]	Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603. 
[n]	A. A. Rylov, V. N. Bubir, and I. R. Gulamov, “Ion Source Revolved on 8o Angle Relatively Dee Edge for Classic Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-12, pp. 493-494. 
[n]	Yu. N. Denisov and V. N. Anosov, “Automatic Parameter Measuring Systems and Control Systems for Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-10, pp. 617-620. 
[n]	C. Jamet et al., “SPIRAL2 Diagnostic Qualifications with RFQ beams”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 188-192. doi:10.18429/JACoW-IBIC2019-MOPP036
[n]	D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n]	Yu. N. Denisov, “Cyclotrons of the JINR Laboratory of Nuclear Problems (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-07, pp. 62-67. 
[n]	B. C. Jiang, J. Hou, C. X. Yin, and Z. T. Zhao, “Status of the SSRF Fast Orbit Feedback System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP065, pp. 2855-2857. 
[n]	R. Narayanan et al., “Applications of an Indigenously Developed Compact ECR Plasma Source [CEPS] at IIT Delhi”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO21, unpublished. 
[n]	V. N. Anosov, M. Chihak, Yu. N. Denisov, A. V. Kalmykov, and A. N. Lubenko, “The System of Automatic Beam Phase Measuring and Control for the Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper H-09, pp. 565-567. 
[n]	J. W. McKenzie et al., “Bunch Length Measurements using a Transverse Deflecting Cavity on VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 323-326. doi:10.18429/JACoW-IPAC2016-MOPMR035
[n]	J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300. 
[n]	R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721. 
[n]	C. Barue et al., “CYCLONE44: a Radioactive Ion Beam Postaccelerator-Mass Separator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04F, pp. 544-546. 
[n]	J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3971-3974. 
[n]	T. Hoffmann, G. Jan?ía, and M. Schwickert, “FESA at FAIR - The Front-End Software Architecture”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP009, pp. 4794-4796. 
[n]	G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 474-477. doi:10.18429/JACoW-IPAC2025-MOPM066
[n]	W. Beeckman et al., “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: Progress Report of the Magnetic Field Mapping and Shimming”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-14, pp. 222-225. 
[n]	R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676. 
[n]	C. Jamet et al., “Beam Diagnostic Overview of the SPIRAL2 RNB Section”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD06, pp. 314-316. 
[n]	D. Vandeplassche, J. C. Am?®lia, W. Beeckman, Y. Jongen, G. Lannoye, and S. Zaremba, “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: On Beam Dynamics Issues”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-05, pp. 454-457. 
[n]	G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG13, unpublished. 
[n]	J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper C-03, pp. 319-322. 
[n]	G. P. Lawrence and T. P. Wangler, “Integrated Normal-Conducting/Superconducting High Power Proton Linac for APT Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W020, pp. 1156-1158. 
[n]	M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132. 
[n]	L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749. 
[n]	D. Bibet and M-H. Moscatello, “Cyclotron Tuning as a Rebuncher”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-01, pp. 419-422. 
[n]	V. Kamerdzhiev, C. B?Âhme, J. Dietrich, P. Forck, T. Giacomini, and D. A. Liakin, “Beam Test of the FAIR IPM Prototype in COSY”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB12, pp. 191-193. 
[n]	F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1047-1048. doi:10.18429/JACoW-ICALEPCS2015-WEPGF146
[n]	C. Courtois et al., “Intensity Control in GANIL's Experimental Rooms”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF31, pp. 587-589. 
[n]	D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n]	A. A. Rylov, I. R. Gulamov, A. P. Portyanko, and B. S. Yuldashev, “A Fast Method for Producing Super-Pure Radionuclide 57Co at the Classical 1.5 meter Cyclotron of the Institute of Nuclear Physics Ac.Sc.RUz”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-07, pp. 556-558. 
[n]	S. Mathisen, R. Smith, and T. Pacey, “Charge measurement systems on CLARA at Daresbury laboratory”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2400-2402. doi:10.18429/JACoW-IPAC2024-WEPG77
[n]	W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1216-1219. 
[n]	J. Rosenzweig and E. Colby, “Charge and Wavelength Scaling of RF Photoinjectors: A Design Tool”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB05, pp. 957-960. 
[n]	C. Jamet, T. Andre, P. Legallois, S. Leloir, and C. Potier de courcy, “RF Calibration and Distribution devices for SPIRAL2 BPMs”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP015, unpublished. 
[n]	S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498. 
[n]	C. Bieth, J. Arianer, J. Bosser, A. Cabrespine, and Ch. Goldstein, “A One MeV/Nucleon Heavy Ion Linear Accelerator”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-06, pp. 508-510. 
[n]	G. A. Fatkin, A. M. Batrakov, I. V. Ilyin, G. Y. Kurkin, A. M. Pilan, and M. Yu. Vasilyev, “Controller for RF Stations for Booster of NICA Project”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC29, pp. 383-385. 
[n]	A. A. Asseev, M. D. Bavizhev, E. A. Ludmirsky, V. A. Maisheev, and E. A. Myae, “The Main Results of Four Years Experience on Extracton of Protons by Bent Crystal from the 70 GeV IHEP Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2388-2391. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search