Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Messmer et al., “Simulation-driven Optimization of Heavy-ion Production in ECR Sources”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBAB01, pp. 3786-3788.
[n] C. Pellegrini, M. Cornacchia, and D. Robin, “Conceptual Design of a High Luminosity 510 MeV Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2853-2856.
[n] A. Novokhatski, M. Timm, and T. Weiland, “Properties of Surface Roughness Wake Fields”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A05, pp. 1441-1443.
[n] A. Ueno, “Measurement of Precise Particle Distributions in Emittance Phase Plane in the JHP LEBT”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP10, pp. 343-345.
[n] K. Ito, H. Higaki, T. Kurauchi, and H. Okamoto, “Experimental Observation of Low-Order Collective Oscillation Modes in a Strong-Focusing Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3130-3133. doi:10.18429/JACoW-IPAC2019-WEPTS018
[n] N. Kroll, S. Schultz, D. R. Smith, and D. C. Vier, “Photonic Band Gap Accelerator Cavity Design at 90 GHz”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP72, pp. 830-832.
[n] A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818.
[n] Yu. A. Rogovsky and E. A. Bekhtenev, “Pickup Beam Measurement System at the VEPP-2000 Collider”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD68, pp. 203-205.
[n] S. B. Vorozhtsov, B. I. Zamolodchikov, and N. L. Zaplatin, “The Magnetic System of the Monoenergetic Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D19, pp. XX-XX.
[n] A. Ropert, “Effect of a Reduced Vertical Aperture on the ESRF Lifetime”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI003, pp. 739-741.
[n] F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844.
[n] R. Tiede, D. M?ñder, N. F. Petry, H. Podlech, U. Ratzinger, and C. Zhang, “Improvements of the LORASR Code and their Impact on Current Beam Dynamics Designs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP063, pp. 569-571.
[n] E. Plawski, A. Kucharczyk, and S. Kulinski, “The Technical Realisation of RF Kickers for CLIC Test Facility CTF3”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB029, pp. 2787-2789.
[n] P. Chu, R. H. Iverson, P. Krejcik, D. Rogind, G. R. White, and M. Woodley, “Linac Energy Management for LCLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD057, pp. 3224-3226.
[n] A. Drago et al., “DAFNE Control System Status and Performance”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03G, pp. 1673-1675.
[n] D. Shimizu, H. Ryuto, M. Takeuchi, and D. Yamamoto, “Liquid Cluster Ion Beam Processing of Transition Metal Films”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 415-417. doi:10.18429/JACoW-IPAC2018-MOPML011
[n] N. Ohuchi et al., “Design and Construction of the Proto-type Quadrupole Magnets for the SuperKEKB Interaction Region”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA04, pp. 1232-1234.
[n] H. D. Beerling-Van der Molen et al., “The Production of Radionuclides for Medical Application with the 280 cm AVF Cyclotron in Groningen”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-13, pp. 2271-2273.
[n] J. T. Cremer and W. W. Destler, “Collective Acceleration of Laser Produced Ions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3186-3189.
[n] W. J. D. Johnson and W. E. Stein, “Dual Klystron Modulator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO464, pp. 229-231.
[n] H. Hahn and H. Halama, “Design Study of a Superconducting Radiofrequency Beam Separator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 356-361.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Messmer et al., “Simulation-driven Optimization of Heavy-ion Production in ECR Sources”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBAB01, pp. 3786-3788.
- C. Pellegrini, M. Cornacchia, and D. Robin, “Conceptual Design of a High Luminosity 510 MeV Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2853-2856.
- A. Novokhatski, M. Timm, and T. Weiland, “Properties of Surface Roughness Wake Fields”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A05, pp. 1441-1443.
- A. Ueno, “Measurement of Precise Particle Distributions in Emittance Phase Plane in the JHP LEBT”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP10, pp. 343-345.
- K. Ito, H. Higaki, T. Kurauchi, and H. Okamoto, “Experimental Observation of Low-Order Collective Oscillation Modes in a Strong-Focusing Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3130-3133.
- N. Kroll, S. Schultz, D. R. Smith, and D. C. Vier, “Photonic Band Gap Accelerator Cavity Design at 90 GHz”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP72, pp. 830-832.
- A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818.
- Yu. A. Rogovsky and E. A. Bekhtenev, “Pickup Beam Measurement System at the VEPP-2000 Collider”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD68, pp. 203-205.
- S. B. Vorozhtsov, B. I. Zamolodchikov, and N. L. Zaplatin, “The Magnetic System of the Monoenergetic Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D19, pp. XX-XX.
- A. Ropert, “Effect of a Reduced Vertical Aperture on the ESRF Lifetime”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI003, pp. 739-741.
- F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844.
- R. Tiede, D. M?ñder, N. F. Petry, H. Podlech, U. Ratzinger, and C. Zhang, “Improvements of the LORASR Code and their Impact on Current Beam Dynamics Designs”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP063, pp. 569-571.
- E. Plawski, A. Kucharczyk, and S. Kulinski, “The Technical Realisation of RF Kickers for CLIC Test Facility CTF3”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB029, pp. 2787-2789.
- P. Chu, R. H. Iverson, P. Krejcik, D. Rogind, G. R. White, and M. Woodley, “Linac Energy Management for LCLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD057, pp. 3224-3226.
- A. Drago et al., “DAFNE Control System Status and Performance”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03G, pp. 1673-1675.
- D. Shimizu, H. Ryuto, M. Takeuchi, and D. Yamamoto, “Liquid Cluster Ion Beam Processing of Transition Metal Films”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 415-417.
- N. Ohuchi et al., “Design and Construction of the Proto-type Quadrupole Magnets for the SuperKEKB Interaction Region”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA04, pp. 1232-1234.
- H. D. Beerling-Van der Molen et al., “The Production of Radionuclides for Medical Application with the 280 cm AVF Cyclotron in Groningen”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-13, pp. 2271-2273.
- J. T. Cremer and W. W. Destler, “Collective Acceleration of Laser Produced Ions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3186-3189.
- W. J. D. Johnson and W. E. Stein, “Dual Klystron Modulator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO464, pp. 229-231.
- H. Hahn and H. Halama, “Design Study of a Superconducting Radiofrequency Beam Separator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 356-361.
Back to search