Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Progress on the Optics Corrections of FCC-hh”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2019-2022. doi:10.18429/JACoW-IPAC2017-TUPVA001
[n] G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
[n] K. Ruisard, A. Aleksandrov, S. Cousineau, A. Hoover, T. Thompson, and A. Zhukov, “Measurements at peak operational beam current in the SNS beam test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2713-2716. doi:10.18429/JACoW-IPAC2023-WEPA027
[n] T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
[n] J. L. Revol et al., “Operation and Recent Developments of the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB013, pp. 854-856.
[n] J. van Zeijts, T. D'Ottavio, B. Frak, and R. Michnoff, “The RHIC Sequencer”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH008, pp. 782-784.
[n] Z. Greenwald and D. L. Rubin, “CESR IV Proposed Transfer Line Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA95, pp. 1300-1302.
[n] G. V. Dolbilov et al., “Development of Linear Induction Accelerators at JINR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-03, pp. 363-365.
[n] F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
[n] Z. Greenwald, S. Greenwald, and D. H. Rice, “REC Quadrupole's Beam Pipe Temperature Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P042, pp. 3705-3707.
[n] H. Lengeler, “Design of Superconducting Accelerator Cavities”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-10, pp. XX-XX.
[n] E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] J. Lewis and P. Heymans, “The Program Line Sequencer, A New Approach”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 640-643.
[n] T. Grimm, W. Hartung, M. Johnson, P. Kneisel, L. Turlington, and R. York, “Cryomodule Design for the Rare Isotope Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB066, pp. 1350-1352.
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
For LaTeX
Use Complete Form
For BibTeX
References
- D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Progress on the Optics Corrections of FCC-hh”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2019-2022.
- G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
- K. Ruisard, A. Aleksandrov, S. Cousineau, A. Hoover, T. Thompson, and A. Zhukov, “Measurements at peak operational beam current in the SNS beam test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA027, pp. 2713-2716.
- T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
- J. L. Revol et al., “Operation and Recent Developments of the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB013, pp. 854-856.
- J. van Zeijts, T. D'Ottavio, B. Frak, and R. Michnoff, “The RHIC Sequencer”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH008, pp. 782-784.
- Z. Greenwald and D. L. Rubin, “CESR IV Proposed Transfer Line Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA95, pp. 1300-1302.
- G. V. Dolbilov et al., “Development of Linear Induction Accelerators at JINR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-03, pp. 363-365.
- F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
- Z. Greenwald, S. Greenwald, and D. H. Rice, “REC Quadrupole's Beam Pipe Temperature Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P042, pp. 3705-3707.
- H. Lengeler, “Design of Superconducting Accelerator Cavities”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-10, pp. XX-XX.
- E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- J. Lewis and P. Heymans, “The Program Line Sequencer, A New Approach”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 640-643.
- T. Grimm, W. Hartung, M. Johnson, P. Kneisel, L. Turlington, and R. York, “Cryomodule Design for the Rare Isotope Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB066, pp. 1350-1352.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
Back to search