JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Adachi et al., “Phase Space Painting Of Charge Exchange Injection in the KEK Booster”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP24C, pp. 2137-2139. 
[n]	J. Serrano, P. Alvarez, D. Autiero, and J. Lewis, “Inter-laboratory Synchronization for the CNGS Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH125, pp. 3092-3094. 
[n]	J. W. McKenzie et al., “Bunch Length Measurements using a Transverse Deflecting Cavity on VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 323-326. doi:10.18429/JACoW-IPAC2016-MOPMR035
[n]	F. Zimmermann, J. T. Seeman, M. Zolotorev, and W. Stoeffl, “Trapped Macroparticles in Electron Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPG10, pp. 517-519. 
[n]	L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749. 
[n]	S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2865-2868. 
[n]	J. Safranek and P. M. Stefan, “Emittance Measurement at the NSLS X-Ray Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP006L, pp. 1573-1575. 
[n]	R. J. Nawrocky and R. F. Lambiase, “Pulsed Power Supply System for the Fast" Quadrupoles in the AGS"”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2772-2775. 
[n]	C. G. Trahern et al., “Relational Databases for RHIC Design and Control”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1806-1809. 
[n]	J. M. Cavedon et al., “An Accelerator for Testing Superconducting RF Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 52-54. 
[n]	D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705. 
[n]	X. R. Hao, “HOMs Extraction Structure Design for HEPS 166.6 MHz Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 403-407. doi:10.18429/JACoW-SRF2019-TUP008
[n]	J. H. Lewis, J. Serrano, and P. Alvarez, “The LHC Central Timing Hardware Implementation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB02, pp. 400-402. 
[n]	W. Lin et al., “AGS Booster model calibration and digital-twin development”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3449-3452. doi:10.18429/JACoW-IPAC2024-THPG78
[n]	M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523. 
[n]	S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898. 
[n]	S. N. Galyamin, A. V. Tyukhtin, V. V. Vorobev, A. Altmark, and S. Baturin, “Radiation of a Bunch Flying from the Open End of a Waveguide with a Dielectric Loading”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 519-521. doi:10.18429/JACoW-RUPAC2016-WEPSB069
[n]	I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746. 
[n]	J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1027-1030. 
[n]	X. Y. Zhang et al., “Mechanical Design and Horizontal Tests of a Dressed 166.6 MHz Quarter-wave ?=1 SRF Cavity System”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 408-412. doi:10.18429/JACoW-SRF2019-TUP010
[n]	A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2015-THHD3O08
[n]	P. Wang et al., “High Power Test of the S-Band Spherical Pulse Compressor at Tsinghua University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4008-4010. doi:10.18429/JACoW-IPAC2018-THPAL153
[n]	J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3234-3237. 
[n]	Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263. 
[n]	F. Bordry et al., “LEP Operation in 1992 with a 90[degree] Optics”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2001-2004. 
[n]	T. Nakamura et al., “Suppression of Transverse Instabilities by Chromaticity Modulation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOBRA02, pp. 3647-3649. 
[n]	L. Liu et al., “Status of Sirius operation with users”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 228-231. doi:10.18429/JACoW-IPAC2025-MOPB089
[n]	W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 92-98. doi:10.18429/JACoW-ICALEPCS2017-MODPL02
[n]	S. Suzuki, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and Y. Shoji, “Bunch Compression using the Transport Line and Short Bunch revolving in NewSUBARU”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3MA05, pp. 619-621. 
[n]	A. Wolf et al., “Results from Electron Cooling Experiments at LEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 204-207. 
[n]	D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM17, pp. XX-XX. 
[n]	S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262. 
[n]	C. Jamet and E. Petit, “Beam Current Measurements with Logarithmic Converter”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-40, pp. 297-300. 
[n]	J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303. 
[n]	A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3899-3903. 
[n]	R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514. 
[n]	J. R. Patterson, G. H. Hoffstaetter, and Y. K. Kim, “The Center for Bright Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 830-832. doi:10.18429/JACoW-NAPAC2016-WEPOA62
[n]	L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3848-3851. doi:10.18429/JACoW-IPAC2018-THPAL084
[n]	G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806. 
[n]	U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search