Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Thorndahl, A. Millich, G. Guignard, and G. Carron, “Transverse Wake Fields in the CLIC Transfer Structure”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3426-3429.
[n] T. Kageyama, Y. Morozumi, Y. Yamazaki, and K. Yoshino, “Development of Annular Coupled Structure”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-51, pp. 456-458.
[n] C. Hernalsteens, C. Lannoy, O. K. Tuormaa, M. Vill?®n Basco, C. Wiesner, and D. Wollmann, “The Effect of a Partially Depleted Halo on the Criticality and Detectability of Fast Failures in the HL-LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1866-1869. doi:10.18429/JACoW-IPAC2022-WEPOPT014
[n] V. K. Bhatnagar and A. K. Jain, “Fabrication of Dipole Vacuum Chamber”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM203, pp. XX-XX.
[n] M. Boscolo, O. R. Blanco-Garc?¡a, H. Burkhardt, R. Kersevan, M. Lueckhof, and F. Collamati, “Beam-gas Background Characterization in the FCC-ee IR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 322-325. doi:10.18429/JACoW-IPAC2018-MOPMF085
[n] C. Carli and F. Caspers, “Stochastic Cooling at the CERN Antiproton Decelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B08, pp. 2414-2416.
[n] H. Zha, A. Grudiev, and V. A. Dolgashev, “RF Design of the CLIC Structure Prototype Optimized for Manufacturing from Two Halves”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2147-2149. doi:10.18429/JACoW-IPAC2015-TUPTY054
[n] G. Ganetis, J. Herrera, R. Hogue, J. Skaritka, P. Wanderer, and E. Willen, “Field Measuring Probe for SSC Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1393-1396.
[n] L. Thorndahl, “Model Work on a Transfer Structure for CLIC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3243-3246.
[n] D. Gu and M. Zhang, “Start to End Beam dynamics optimization for the SHINE accelerator”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL146, unpublished.
[n] M. Fouaidy, P. Bosland, S. Chel, M. Juillard, and M. Ribeaudeau, “New Results on RF Properties of Superconducting Niobium Films Using a Thermometric System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO038, pp. 2229-2231.
[n] C. Steier et al., “Commissioning of the ALS with Superbends”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI033, pp. 754-756.
[n] J. Rosenzweig, S. Hartman, and J. Stevens, “RF Focusing Effects and Multi-Bunch Beam Breakup in Superconducting Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3357-3360.
[n] C. H. Haquin et al., “The SPIRAL2 Control System Status Just Before the First Beam”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 8. doi:10.18429/JACoW-ICALEPCS2019-MOAPP02
[n] R. J. Weggel and N. V. Mokhov, “Pion Yield vs. Geometry of Target and ~20 T Pulse Solenoid for a Muon Collider Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP41, pp. 3047-3049.
[n] C. J. Gardner et al., “Status and Recent Performance of the Accelerators that Serve as Gold Injector for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH045, pp. 3326-3328.
[n] J. Marroncle et al., “Transverse Emittance Measurement of a 2.5 MeV Proton Beam on LIPAc, IFMIFÔÇÖs Prototype”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 288-292. doi:10.18429/JACoW-IBIC2019-TUPP006
[n] P. Goslawski et al., “BESSY III - status and overview”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 457-460. doi:10.18429/JACoW-IPAC2023-MOPA174
For LaTeX
Use Complete Form
For BibTeX
References
- L. Thorndahl, A. Millich, G. Guignard, and G. Carron, “Transverse Wake Fields in the CLIC Transfer Structure”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3426-3429.
- T. Kageyama, Y. Morozumi, Y. Yamazaki, and K. Yoshino, “Development of Annular Coupled Structure”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-51, pp. 456-458.
- C. Hernalsteens, C. Lannoy, O. K. Tuormaa, M. Vill?®n Basco, C. Wiesner, and D. Wollmann, “The Effect of a Partially Depleted Halo on the Criticality and Detectability of Fast Failures in the HL-LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1866-1869.
- V. K. Bhatnagar and A. K. Jain, “Fabrication of Dipole Vacuum Chamber”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM203, pp. XX-XX.
- M. Boscolo, O. R. Blanco-Garc?¡a, H. Burkhardt, R. Kersevan, M. Lueckhof, and F. Collamati, “Beam-gas Background Characterization in the FCC-ee IR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 322-325.
- C. Carli and F. Caspers, “Stochastic Cooling at the CERN Antiproton Decelerator”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B08, pp. 2414-2416.
- H. Zha, A. Grudiev, and V. A. Dolgashev, “RF Design of the CLIC Structure Prototype Optimized for Manufacturing from Two Halves”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2147-2149.
- G. Ganetis, J. Herrera, R. Hogue, J. Skaritka, P. Wanderer, and E. Willen, “Field Measuring Probe for SSC Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1393-1396.
- L. Thorndahl, “Model Work on a Transfer Structure for CLIC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3243-3246.
- D. Gu and M. Zhang, “Start to End Beam dynamics optimization for the SHINE accelerator”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL146, unpublished.
- M. Fouaidy, P. Bosland, S. Chel, M. Juillard, and M. Ribeaudeau, “New Results on RF Properties of Superconducting Niobium Films Using a Thermometric System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO038, pp. 2229-2231.
- C. Steier et al., “Commissioning of the ALS with Superbends”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI033, pp. 754-756.
- J. Rosenzweig, S. Hartman, and J. Stevens, “RF Focusing Effects and Multi-Bunch Beam Breakup in Superconducting Linear Colliders”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3357-3360.
- C. H. Haquin et al., “The SPIRAL2 Control System Status Just Before the First Beam”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 8.
- R. J. Weggel and N. V. Mokhov, “Pion Yield vs. Geometry of Target and ~20 T Pulse Solenoid for a Muon Collider Experiment”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP41, pp. 3047-3049.
- C. J. Gardner et al., “Status and Recent Performance of the Accelerators that Serve as Gold Injector for RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH045, pp. 3326-3328.
- J. Marroncle et al., “Transverse Emittance Measurement of a 2.5 MeV Proton Beam on LIPAc, IFMIFÔÇÖs Prototype”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 288-292.
- P. Goslawski et al., “BESSY III - status and overview”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA174, pp. 457-460.
Back to search