Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Kumar, V. Samulyak, and K. Yu, “Influence of Ionization and Beam Quality on Interaction of Tw-Peak Co2 Laser With Hydrogen Plasma”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1560-1563. doi:10.18429/JACoW-IPAC2018-TUPML015
[n] S. An, Y.-S. Cho, B. H. Choi, Y. M. Li, Y. Z. Tang, and L. Zhang, “Prototyping PEFP Low-Beta Copper Cavity and HOM Coupler”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP035, pp. 2070-2072.
[n] J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “End Field Structures for Linear/Helical Insertion Devices”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA21, pp. 2665-2667.
[n] P. Chevtsov, V. R. Arsov, and M. Dach, “Bunch Arrival Time Monitor Control Setup for SwissFEL Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 469-472. doi:10.18429/JACoW-ICALEPCS2017-TUPHA039
[n] H. W. Kim et al., “Analysis of Beam Stability in the KAERI Ultrashort Pulse Accelerator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP010, pp. 697-698.
[n] T. Szymocha et al., “SOLARIS Digital User Office”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 873-875. doi:10.18429/JACoW-ICALEPCS2017-TUPHA188
[n] C. Xu et al., “Input RF Coupler Design for Energy Compensator Cavity in eRHIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1184-1186. doi:10.18429/JACoW-IPAC2017-MOPVA141
[n] T. Hellert et al., “Simulation of Trajectory Correction in Early Commissioning of the Advanced Light Source Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4256-4258. doi:10.18429/JACoW-IPAC2018-THPMF078
[n] R. Cee, M. Krassilnikov, S. Setzer, and T. Weiland, “Beam Dynamics Simulations for the PITZ RF-Gun”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI079, pp. 1622-1624.
[n] L. Wang, G. Feng, W. Li, L. Liu, H. Xu, and S. C. Zhang, “A Low Emittance Lattice Design for HLS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN060, pp. 1064-1066.
[n] P. Zhang et al., “Beam-based HOM Study in Third Harmonic SC Cavities for Beam Alignment at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD17, pp. 77-79.
[n] E. Marin, A. Latina, F. Plassard, D. Schulte, and R. Tomas, “CLIC Tuning Performance Under Realistic Error Conditions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2403-2406. doi:10.18429/JACoW-IPAC2017-TUPVA130
[n] B. Jacquot, “GANIL STATUS REPORT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B1, pp. XX-XX.
[n] M. Aiba et al., “Development of a FFAG Proton Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B21, pp. 581-583.
[n] J. W. Lewellen, F. L. Krawczyk, and N. A. Moody, “High-gradient Cathode Testing for MaRIE”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP024, pp. 739-742.
[n] S. Kasaei, M. C. L. Buzio, and L. Fiscarelli, “Dynamic Behaviour of Fast-Pulsed Quadrupole Magnets for LINAC4 Transfer Line”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4150-4153. doi:10.18429/JACoW-IPAC2017-THPIK027
[n] M. Tomaizawa et al., “Linac Complex of the Radioactive Beam Facility at KEK-TANASHI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D057, pp. 223-225.
[n] L. S. Stoel, M. Benedikt, M. A. Fraser, B. Goddard, J. Prieto, and F. M. Velotti, “Progress Toward a Dynamic Extraction Bump for Slow Extraction in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 838-841. doi:10.18429/JACoW-IPAC2018-TUPAF055
[n] J. Beebe-Wang, Y. Y. Lee, S. Machida, C. R. Prior, D. Raparia, and J. Wei, “Beam Properties in the SNS Accumulator Ring due to Transverse Phase Space Painting”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6A02, pp. 1465-1467.
[n] S. Adam and A. C. Mezger, “Two Dimensional Scans with Adaptive Domain Control”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-09, pp. 668-671.
[n] T. Saito, M. Inoue, I. Miura, A. Shimizu, and H. Tamura, “RF Model Study for a Proposed Ring Cyclotron System at RCNP”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-12, pp. 415-417.
[n] L. H. Yu, “Orbit Stability and Feedback Control in Synchrotron Radiation Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 54-60.
[n] M.-E. Couprie et al., “Control of Laser Plasma Accelerated Electrons: A Route for Compact Free Electron Lasers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2280-2285. doi:10.18429/JACoW-IPAC2019-WEZPLS1
[n] N. Vafaei-Najafabadi et al., “Suppression of the Transformer Ratio Due to Distributed Injection of Electrons in a Plasma Wakefield Accelerator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC46, pp. 165-167.
[n] K. Junck, J. Marriner, and D. McGinnis, “A Study of the Longitudinal Coupled Bunch Instability in the Fermilab Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ28, pp. 3013-3015.
[n] M. Olvegaard et al., “Performance of Parabolic and Diffusive OTR Screens at the CLIC Test Facility 3”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD49, pp. 413-415.
[n] M. Togasaki et al., “Development of a Buffer Gas-Free Buncher for Low Energy RI Ion Beam”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB25, pp. 253-255.
[n] K. Yamada et al., “Progress on the Commissioning of Radioactive Isotope Beam Factory at RIKEN Nishina Center”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-10, pp. 16-20.
[n] R. Bartolini, “Resonance Driving Term Experiments: An Overview”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOM1MP03, pp. 22-27.
[n] M. Therasse et al., “Series Superconducting Cavity Production for the HIE-ISOLDE Project at CERN”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP131, pp. 1165-1167.
[n] A. Bogomyagkov et al., “Precise Energy Measurements in Experiments on VEPP-4M Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP009, pp. 1138-1140.
[n] A. Bertarelli et al., “Novel Materials for Collimators at LHC and its Upgrades”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4AB03, pp. 438-442.
[n] I. Strasik et al., “Residual Activity Induced by High-energy Heavy Ions in Stainless Steel and Copper”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP082, pp. 3551-3553.
[n] R. K. Jobe, N. Phinney, and K. Thompson, “Klystron Control Software in the SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2110-2112.
[n] K. Thomsen, “VIMOS, Beam Monitoring for SINQ”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB18, pp. 206-207.
[n] P. Krejcik et al., “Timing and Synchronization at the LCLS”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC28, pp. 373-375.
[n] M. Tomizawa, M. Aoki, and I. Itahashi, “J-PARC Accelerator Scheme for Muon to Electron Conversion Search”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC128, pp. 367-369.
[n] F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232.
[n] O. Hryhorenko, C. Z. Antoine, M. Chabot, and D. Longuevergne, “Metallographic Polishing Pathway to the Future of Large Scale SRF Facilities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 828-832. doi:10.18429/JACoW-SRF2019-THP002
For LaTeX
Use Complete Form
For BibTeX
References
- P. Kumar, V. Samulyak, and K. Yu, “Influence of Ionization and Beam Quality on Interaction of Tw-Peak Co2 Laser With Hydrogen Plasma”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1560-1563.
- S. An, Y.-S. Cho, B. H. Choi, Y. M. Li, Y. Z. Tang, and L. Zhang, “Prototyping PEFP Low-Beta Copper Cavity and HOM Coupler”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP035, pp. 2070-2072.
- J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “End Field Structures for Linear/Helical Insertion Devices”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA21, pp. 2665-2667.
- P. Chevtsov, V. R. Arsov, and M. Dach, “Bunch Arrival Time Monitor Control Setup for SwissFEL Applications”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 469-472.
- H. W. Kim et al., “Analysis of Beam Stability in the KAERI Ultrashort Pulse Accelerator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP010, pp. 697-698.
- T. Szymocha et al., “SOLARIS Digital User Office”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 873-875.
- C. Xu et al., “Input RF Coupler Design for Energy Compensator Cavity in eRHIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1184-1186.
- T. Hellert et al., “Simulation of Trajectory Correction in Early Commissioning of the Advanced Light Source Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4256-4258.
- R. Cee, M. Krassilnikov, S. Setzer, and T. Weiland, “Beam Dynamics Simulations for the PITZ RF-Gun”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI079, pp. 1622-1624.
- L. Wang, G. Feng, W. Li, L. Liu, H. Xu, and S. C. Zhang, “A Low Emittance Lattice Design for HLS Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN060, pp. 1064-1066.
- P. Zhang et al., “Beam-based HOM Study in Third Harmonic SC Cavities for Beam Alignment at FLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD17, pp. 77-79.
- E. Marin, A. Latina, F. Plassard, D. Schulte, and R. Tomas, “CLIC Tuning Performance Under Realistic Error Conditions”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2403-2406.
- B. Jacquot, “GANIL STATUS REPORT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18B1, pp. XX-XX.
- M. Aiba et al., “Development of a FFAG Proton Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B21, pp. 581-583.
- J. W. Lewellen, F. L. Krawczyk, and N. A. Moody, “High-gradient Cathode Testing for MaRIE”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP024, pp. 739-742.
- S. Kasaei, M. C. L. Buzio, and L. Fiscarelli, “Dynamic Behaviour of Fast-Pulsed Quadrupole Magnets for LINAC4 Transfer Line”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4150-4153.
- M. Tomaizawa et al., “Linac Complex of the Radioactive Beam Facility at KEK-TANASHI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D057, pp. 223-225.
- L. S. Stoel, M. Benedikt, M. A. Fraser, B. Goddard, J. Prieto, and F. M. Velotti, “Progress Toward a Dynamic Extraction Bump for Slow Extraction in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 838-841.
- J. Beebe-Wang, Y. Y. Lee, S. Machida, C. R. Prior, D. Raparia, and J. Wei, “Beam Properties in the SNS Accumulator Ring due to Transverse Phase Space Painting”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6A02, pp. 1465-1467.
- S. Adam and A. C. Mezger, “Two Dimensional Scans with Adaptive Domain Control”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-09, pp. 668-671.
- T. Saito, M. Inoue, I. Miura, A. Shimizu, and H. Tamura, “RF Model Study for a Proposed Ring Cyclotron System at RCNP”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-12, pp. 415-417.
- L. H. Yu, “Orbit Stability and Feedback Control in Synchrotron Radiation Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 54-60.
- M.-E. Couprie et al., “Control of Laser Plasma Accelerated Electrons: A Route for Compact Free Electron Lasers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2280-2285.
- N. Vafaei-Najafabadi et al., “Suppression of the Transformer Ratio Due to Distributed Injection of Electrons in a Plasma Wakefield Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC46, pp. 165-167.
- K. Junck, J. Marriner, and D. McGinnis, “A Study of the Longitudinal Coupled Bunch Instability in the Fermilab Main Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ28, pp. 3013-3015.
- M. Olvegaard et al., “Performance of Parabolic and Diffusive OTR Screens at the CLIC Test Facility 3”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD49, pp. 413-415.
- M. Togasaki et al., “Development of a Buffer Gas-Free Buncher for Low Energy RI Ion Beam”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB25, pp. 253-255.
- K. Yamada et al., “Progress on the Commissioning of Radioactive Isotope Beam Factory at RIKEN Nishina Center”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper MO-10, pp. 16-20.
- R. Bartolini, “Resonance Driving Term Experiments: An Overview”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOM1MP03, pp. 22-27.
- M. Therasse et al., “Series Superconducting Cavity Production for the HIE-ISOLDE Project at CERN”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP131, pp. 1165-1167.
- A. Bogomyagkov et al., “Precise Energy Measurements in Experiments on VEPP-4M Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP009, pp. 1138-1140.
- A. Bertarelli et al., “Novel Materials for Collimators at LHC and its Upgrades”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO4AB03, pp. 438-442.
- I. Strasik et al., “Residual Activity Induced by High-energy Heavy Ions in Stainless Steel and Copper”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP082, pp. 3551-3553.
- R. K. Jobe, N. Phinney, and K. Thompson, “Klystron Control Software in the SLC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2110-2112.
- K. Thomsen, “VIMOS, Beam Monitoring for SINQ”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB18, pp. 206-207.
- P. Krejcik et al., “Timing and Synchronization at the LCLS”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC28, pp. 373-375.
- M. Tomizawa, M. Aoki, and I. Itahashi, “J-PARC Accelerator Scheme for Muon to Electron Conversion Search”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC128, pp. 367-369.
- F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232.
- O. Hryhorenko, C. Z. Antoine, M. Chabot, and D. Longuevergne, “Metallographic Polishing Pathway to the Future of Large Scale SRF Facilities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 828-832.
Back to search