Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M.-E. Angoletta et al., “Beam Tests of a New Digital Beam Control System for the CERN LEIR Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT019, pp. 1649-1651.
[n] T. Enegren, L. Durieu, D. Michelson, and R. E. Worsham, “Development of Flat-Topped RF Voltage for TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2936-2939.
[n] D. Li, H. Lin, J. Li, Q. Wang, and P. Zhang, “Development of a new digital LLRF system for high energy photon source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4160-4163. doi:10.18429/JACoW-IPAC2023-THPA088
[n] J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
[n] A. Xiao, M. Borland, L. Emery, and V. Sajaev, “Non-linear Effects of Insertion Devices: Simulation and Experiment Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM12, pp. 1073-1075.
[n] A. Vergara-Fern?índez et al., “Information Management within the LHC Hardware Commissioning Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP008, pp. 4791-4793.
[n] A. S. Fisher et al., “Design and Initial Commissioning of Beam Diagnostics for the PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P065, pp. 2253-2255.
[n] T. Hoffmann et al., “A New DAQ Installation for the SIS18 Beam Position Monitoring System at GSI”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP047, pp. 759-761.
[n] J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1336-1339.
[n] V. Zubko et al., “HTS Current Lead Optimization”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456.
[n] T. E. Thompson, A. V. Aleksandrov, T. V. Gorlov, K. J. Ruisard, and A. P. Shishlo, “Effect of Three-Dimensional Quadrupole Magnet Model on Beam Dynamics in the FODO Line at the Spallation Neutron Source Beam Test Facility”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 65-67. doi:10.18429/JACoW-HB2023-TUC1C1
[n] L. T. Huang et al., “Comparison Among Different Tune Measurement Schemes at HLS-II Storage Ring”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 93-96. doi:10.18429/JACoW-IBIC2018-MOPB09
[n] J. Martin, “A Beam Position Detector for SSC Collider Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1124-1127.
[n] C. Yao, Y.-C. Chae, N. Sereno, and B. X. Yang, “Investigation of APS PAR Vertical Beam Instability”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP035, pp. 2393-2395.
[n] C. J. Turner et al., “PandABlocks Open FPGA Framework and Web Stack”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1539-1542. doi:10.18429/JACoW-ICALEPCS2017-THPHA068
[n] J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
[n] C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 112-115. doi:10.18429/JACoW-MEDSI2016-TUAA02
[n] S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292.
[n] J. Dovc, G. Milcinski, and M. Plesko, “A Guerilla Approach to Control System Development”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT004, pp. XX-XX.
[n] P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835.
[n] H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1410-1413.
[n] T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
[n] X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 162-164. doi:10.18429/JACoW-MEDSI2016-TUPE05
[n] D. S. Barton et al., “STATUS OF HIGH CURRENT R&D ENERGY RECOVERY LINAC AT BROOKHAVEN NATIONAL LABORATORY”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper TUFO03, pp. XX-XX.
[n] K. Okamura et al., “Development of a Pulsed Power Supply Utilizing 13 kV Class SiC-MOSFET”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4364-4367. doi:10.18429/JACoW-IPAC2019-FRXXPLM3
[n] Y. Tanimoto, S. Asaoka, T. Honda, T. Nogami, T. Obina, and R. Takai, “Design of the cERL Vacuum System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI012, pp. 3315-3317.
[n] F. P?®rez et al., “ALBA II Acelerator Upgrade Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1467-1470. doi:10.18429/JACoW-IPAC2022-TUPOMS027
For LaTeX
Use Complete Form
For BibTeX
References
- M.-E. Angoletta et al., “Beam Tests of a New Digital Beam Control System for the CERN LEIR Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT019, pp. 1649-1651.
- T. Enegren, L. Durieu, D. Michelson, and R. E. Worsham, “Development of Flat-Topped RF Voltage for TRIUMF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2936-2939.
- D. Li, H. Lin, J. Li, Q. Wang, and P. Zhang, “Development of a new digital LLRF system for high energy photon source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA088, pp. 4160-4163.
- J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
- A. Xiao, M. Borland, L. Emery, and V. Sajaev, “Non-linear Effects of Insertion Devices: Simulation and Experiment Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM12, pp. 1073-1075.
- A. Vergara-Fern?índez et al., “Information Management within the LHC Hardware Commissioning Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP008, pp. 4791-4793.
- A. S. Fisher et al., “Design and Initial Commissioning of Beam Diagnostics for the PEP-II B Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P065, pp. 2253-2255.
- T. Hoffmann et al., “A New DAQ Installation for the SIS18 Beam Position Monitoring System at GSI”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP047, pp. 759-761.
- J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1336-1339.
- V. Zubko et al., “HTS Current Lead Optimization”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456.
- T. E. Thompson, A. V. Aleksandrov, T. V. Gorlov, K. J. Ruisard, and A. P. Shishlo, “Effect of Three-Dimensional Quadrupole Magnet Model on Beam Dynamics in the FODO Line at the Spallation Neutron Source Beam Test Facility”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC1C1, pp. 65-67.
- L. T. Huang et al., “Comparison Among Different Tune Measurement Schemes at HLS-II Storage Ring”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 93-96.
- J. Martin, “A Beam Position Detector for SSC Collider Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1124-1127.
- C. Yao, Y.-C. Chae, N. Sereno, and B. X. Yang, “Investigation of APS PAR Vertical Beam Instability”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP035, pp. 2393-2395.
- C. J. Turner et al., “PandABlocks Open FPGA Framework and Web Stack”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1539-1542.
- J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
- C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 112-115.
- S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292.
- J. Dovc, G. Milcinski, and M. Plesko, “A Guerilla Approach to Control System Development”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDT004, pp. XX-XX.
- P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835.
- H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1410-1413.
- T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
- X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 162-164.
- D. S. Barton et al., “STATUS OF HIGH CURRENT R&D ENERGY RECOVERY LINAC AT BROOKHAVEN NATIONAL LABORATORY”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper TUFO03, pp. XX-XX.
- K. Okamura et al., “Development of a Pulsed Power Supply Utilizing 13 kV Class SiC-MOSFET”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4364-4367.
- Y. Tanimoto, S. Asaoka, T. Honda, T. Nogami, T. Obina, and R. Takai, “Design of the cERL Vacuum System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI012, pp. 3315-3317.
- F. P?®rez et al., “ALBA II Acelerator Upgrade Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1467-1470.
Back to search