JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. L. Andrews et al., “Superlinear Current Dependence in a Grating-Based Tunable THz Source”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU02, pp. 192-195. 
[n]	T. Lensch and M. Werner, “Cause Identification of Beam Losses in PETRA III by Time Correlation of Alarms”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD90, pp. 257-259. 
[n]	S. Teng et al., “Physical Design of the Main Linac Section for electron beam in the STCF injector”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5603, unpublished. 
[n]	S. Saraf, N. Balakrishnan, and J. B. Greer, “Control Systems Design for LCLS-II Temperature Monitoring and Injector Equipment Protection System at SLAC”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA127, pp. XX-XX. 
[n]	M. Gehlot, J. Hussain, S. M. Khan, R. Khullar, G. Mishra, and F. Trillaud, “Field Integral Measurements of DAVV Undulators and Future Measurement Plan”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 513-516. doi:10.18429/JACoW-FEL2019-WEP085
[n]	F. Trillaud, G. A. Barraza Montiel, M. Gehlot, and G. Mishra, “Electromagnetic and Mechanical Analysis of a 14 mm 10-period NbTi Superconducting Undulator”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 360-364. doi:10.18429/JACoW-FEL2017-TUP062
[n]	T. Hellert, F. Mayet, A. Sulc, and C. Tennant, “Bridging the Gap Between Control Systems and Natural Language: A Framework for Semantic Channel Finding”, presented at the IPAC'26, Deauville, France, May 2026, paper FRO6M01, unpublished. 
[n]	J. L. Turner et al., “A High-Intensity Highly-Polarized Electron Beam for High-Energy Physics”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE006, pp. 1419-1421. 
[n]	Y. Wu et al., “Compton gamma-ray production enabled by VUV FEL operating around 170 nm”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG22, unpublished. 
[n]	M. Titze, “On a Framework to Analyze Single-Particle Non-Linear Beam Dynamics: Normal Form on a Critical Point”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 160-163. doi:10.18429/JACoW-IPAC2022-MOPOST040
[n]	A. Halavanau et al., “Progress in CBXFEL construction at SLAC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB094, unpublished. 
[n]	A. F. Balzer, P. Sreelatha Devi, and A. Ziegler, “Double Crystal Monochromator Control System for Energy Materials In-Situ Laboratory Berlin (EMIL)”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1568. doi:10.18429/JACoW-ICALEPCS2019-THAPP06
[n]	K. Sonnad, K. Hammond, J. Sikora, and S. Veitzer, “Effects of Reflections on TE-Wave Measurements of Electron Cloud Density”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST06, pp. 103-107. 
[n]	C. Rohde et al., “Implementation and Design of a Laser Neutralizer in the LANSCE LEBT”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6379, unpublished. 
[n]	G. C. Pappas, D. Lu, M. Schram, and D. L. Vrabie, “Machine Learning for Improved Availability of the SNS Klystron High Voltage Converter Modulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4303-4306. doi:10.18429/JACoW-IPAC2021-THPAB252
[n]	S. Hirlaender et al., “Towards few-shot reinforcement learning in particle accelerator control”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1804-1807. doi:10.18429/JACoW-IPAC2024-TUPS60
[n]	N. Simos, G. Atoian, H. Ludewig, N. V. Mokhov, J. G. O, and S. N. White, “Grad-Level Radiation Damage of SiO2 Detectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP017, pp. 3479-3481. 
[n]	S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Geant4 Simulation of Radiation Effect on the Deflector of Extraction System in HUST SCC250”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 990-993. doi:10.18429/JACoW-IPAC2018-TUPAK013
[n]	R. A. Hardekopf, A. V. Aleksandrov, D. E. Anderson, S. S. Kurennoy, and J. Power, “Design, Construction, and Initial Operation of the SNS MEBT Chopper System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEOBCH02, pp. 150-152. 
[n]	S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Design and Fuild-Solid-Heat Coupling Analysis of an Electrostatic Deflector for Hust SCC250 Proton Therapy Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4713-4715. doi:10.18429/JACoW-IPAC2017-THPVA109
[n]	M. Ebbeni, M. Gehlot, M. Holz, and H. Tarawneh, “Status of Magnetic Measurement Benches for Insertion Device Characterization at MAX IV Laboratory”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3848-3850. doi:10.18429/JACoW-IPAC2021-THPAB047
[n]	K. Fang et al., “Mode Component Evolution and Coherence Analysis in Terawatt Tapered FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP030, pp. 446-450. 
[n]	A. V. Mishin et al., “Portable 2.5 MeV X-Band Linear Accelerator Structure”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1084-1086. doi:10.18429/JACoW-IPAC2021-MOPAB348
[n]	T. G. Primidis, V. Soloviev, S. G. Wells, and C. P. Welsch, “Design and Optimisation of a Stationary Chest Tomosynthesis System with Multiple Flat Panel Field Emitter Arrays: Monte Carlo Simulations and Computer Aided Designs”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3034-3037. doi:10.18429/JACoW-IPAC2022-THPOMS033
[n]	R. J. Weggel and N. V. Mokhov, “Pion Yield vs. Geometry of Target and ~20 T Pulse Solenoid for a Muon Collider Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP41, pp. 3047-3049. 
[n]	Y. L. Zhao, Y. Liu, Y. F. Liu, Q. Tang, and L. Yin, “Particle-Free Engineering in SHINE Superconducting Linac Vacuum System”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 219-221. doi:10.18429/JACoW-MEDSI2023-WEPPP045
[n]	R. M. Jones and C. J. Glasman, “Higher Order Mode Wakefield Simulations and Beam Dynamics Simulations in the ILC Main Linacs”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP067, pp. 199-201. 
[n]	S. Albright, F. Asvesta, G. P. Di Giovanni, M. Marchi, A. Newborough, and T. Prebibaj, “Magnetic cycle optimisation in the CERN PS booster”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1467-1470. doi:10.18429/JACoW-IPAC2025-TUPS026

For LaTeX

Use Complete Form

For BibTeX

References

Back to search