JaCoW Logo

Reference Search

Favourites


For Word

[n]	L. R. Turner and L. Kettunen, “A New 3-D Integral Code for Computation of Accelerator Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2140-2143. 
[n]	F. Willeke, “A B-Factory in the PETRA Tunnel”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 135-138. 
[n]	I. S. Uzun and M. G. Abbott, “CERN Open Hardware Experience: Upgrading the Diamond Fast Archiver”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 901-904. doi:10.18429/JACoW-ICALEPCS2015-WEPGF089
[n]	P. Wanderer et al., “Experiments with All-Kapton Insulation and Axial Prestress in 1.8 m-long SSC R&D Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2164-2167. 
[n]	N. Y. Joshi, S. T. Boogert, F. J. Cullinan, and A. Lyapin, “Position Determination of Closely Spaced Bunches using Cavity BPMs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC164, pp. 1419-1421. 
[n]	D. Naito, Y. Honda, T. Miyajima, and N. Yamamoto, “Production and Performance Evaluation of a Compact Deflecting Cavity to Measure the Bunch Length in the cERL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1023-1026. doi:10.18429/JACoW-IPAC2021-MOPAB330
[n]	D. Xu et al., “Closing crab dispersion by dispersive RF cavity in Electron-Ion Collider Hadron Storage Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 112-115. doi:10.18429/JACoW-IPAC2023-MOPA040
[n]	H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1217-1220. 
[n]	E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645. 
[n]	Z. K. Liu et al., “RF Data Acquisition and Soft Alarm System for the Taiwan Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4039-4041. doi:10.18429/JACoW-IPAC2019-THPRB093
[n]	P. Chu et al., “XAL Adoption Experience at LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP012, pp. 117-119. 
[n]	H. Hassanzadegan et al., “BCM System Optimization for ESS Beam Commissioning through the DTL Tank4”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 277-280. doi:10.18429/JACoW-IBIC2023-TUP038
[n]	M. V. Lalayan et al., “Layout of the PITZ Transverse Deflecting System for Longitudinal Phase Space and Slice Emittance Measurements”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP011, pp. 416-418. 
[n]	H. Shaker and F. Ghasemi, “Design of a Pi/2 Mode S-Band Low Energy TW Electron Linear Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC009, pp. 80-82. 
[n]	A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3899-3903. 
[n]	A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3131-3134. 
[n]	Y. Luo et al., “Optimizing the design tunes of the electron storage ring of the Electron-Ion Collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 128-131. doi:10.18429/JACoW-IPAC2023-MOPA047
[n]	K. Tsumaki, K. Fukami, T. Watanabe, S. Itakura, and N. Kumagai, “Design of a BeamTransport Line from the SACLA Linac to the SPring-8 Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC030, pp. 2975-2977. 
[n]	Y. Luo et al., “Simulation test of various crab dispersion closure bumps for the hadron storage ring of the Electron-Ion Collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 120-123. doi:10.18429/JACoW-IPAC2023-MOPA045
[n]	M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400. 
[n]	J. L. Belmont, J. M. De Conto, A. Fontenille, G. Hadinger, M. Laamyem, and R. Meunier, “An Experimental Method of Aberration Correction for High Resolution Mass Spectrometers”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05D, pp. 2312-2314. 
[n]	F. Willeke and F. Zimmerman, “The Impact of Persistent Current Field Errors on the Stability of the Proton Beam in the HERA Proton Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2483-2488. 
[n]	C. M. Bhat and J. Marriner, “Intrabeam Scattering in the Fermilab Antiproton Accumulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1773-1776. 
[n]	F. Toufexis, J. Neilson, and S. G. Tantawi, “Coupling and Polarization Control in a mm-wave Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1647-1650. doi:10.18429/JACoW-IPAC2017-TUPAB136
[n]	O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of  Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA022, unpublished. 
[n]	F. Mako, A. Fisher, C. W. Roberson, N. Rostoker, and D. Tzach, “Collective Ion Acceleration Controlled by a Gas Gradient”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4199-4202. 
[n]	P. Wanderer et al., “Test of Two 1.8 M SSC Model Magnets with Iterated Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 497-500. 
[n]	G. Machicoane et al., “Recent Advance in ECR Ion Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 31-36. doi:10.18429/JACoW-NAPAC2019-MOYBB2
[n]	F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066. 
[n]	X. Wu, R. C. York, A. Faltens, D. Judd, and E. Lee, “Design and Simulation Studies of a One-Tenth Scale Final Focus System for Heavy Ion Fusion”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P015, pp. 195-197. 
[n]	S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2808-2811. 
[n]	W. Wang, H. T. H, X. Y. He, and D. R. Xu, “Alignment and Installation for the FELiChEM project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4977-4979. doi:10.18429/JACoW-IPAC2018-THPML127
[n]	A. Ferrero Colomo et al., “Performance Validation of the Existing and Upgraded PS Injection Kicker”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3994-3997. doi:10.18429/JACoW-IPAC2019-THPRB078
[n]	S. Srichan, Ch. Dhammatong, P. Klysubun, V. Sooksrimuang, K. Takkrathoke, and A. Tong-on, “Operation of SLRI Cryogenic System for a 6.5 T Superconducting Wavelength Shifter”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2765-2767. doi:10.18429/JACoW-IPAC2014-WEPRI113
[n]	M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3063-3065. doi:10.18429/JACoW-IPAC2019-WEPRB107
[n]	S. Adam and W. Joho, “Setting Up the SIN 590 MeV Ring Cyclotron for Single Turn Extraction”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-14, pp. 2358-2361. 
[n]	A. Blednykh and H. Henke, “A HOM Damped Planar Accelerating Structure”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF012, pp. 982-984. 
[n]	T. Kramer et al., “Deployment and Commissioning of the CERN PS Injection Kicker System for Operation with 2 GeV Beams in Short Circuit Mode”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4489-4492. doi:10.18429/JACoW-IPAC2021-THPAB354

For LaTeX

Use Complete Form

For BibTeX

References

Back to search