Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Li, H. P. Bohlen, and R. N. Tornoe, “IOT RF Power Sources for Pulsed and CW Linacs”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TH201, pp. 574-577.
[n] Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329. doi:10.18429/JACoW-RuPAC2021-TUPSB48
[n] A. S. Chauchat, JP. Brasile, A. Binet, V. Le Flanchec, J-P. Nègre, and J.-M. Ortega, “Optimisation of an Inverse Compton Scattering Experiment with a Real Time Detection Scheme Based on a Radio Luminescent Screen and Comparison of the X-rays Beam Characteristics with Simulations”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR042, pp. 4068-4070.
[n] J. R. Calvey et al., “Measurements of Ion Instability and Emittance Growth for the APS-Upgrade”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 258-262. doi:10.18429/JACoW-IBIC2020-THPP25
[n] A. E. Wheelhouse, H. L. Gasson, N. Patel, D. H. Rowlands, R. Schnuerer, and I. Tahir, “The Linac Test Facility at Daresbury Laboratory”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 47-49. doi:10.18429/JACoW-LINAC2022-MOPOJO10
[n] M. J. Christensen, M. J. Clarke, A. H. C. Mukai, J. M. C. Nilsson, M. Shetty, and T. S. Richter, “Software-based Event Formation at European Spallation Source”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOMPL004, pp. XX-XX.
[n] V. Nassisi, F. Belloni, D. Doria, A. Lorusso, M. V. Siciliano, and L. Velardi, “New Pulsed Current and Voltage Circuits Based on Transmission Lines”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH140, pp. 3122-3124.
[n] J. Beveridge et al., “Initial Operating Experience with the TRIUMF 300 keV H- Injection System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1707-1711.
[n] D. W. Peterson, S. J. Werkema, and P. Zhou, “Transverse Emittance Growth in the Fermilab Antiproton Accumulator with High-Current Antiproton Stacks”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3573-3576.
[n] C.-C. Kuo, H. P. Chang, K.-T. Hsu, and H. J. Tsai, “Vertical Beam Size Control at SRRC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE016, pp. 1148-1150.
[n] K. N. Li et al., “Development of the Control System for Some Heavy Nuclides Measurement AMS Facility”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA088, pp. XX-XX.
[n] J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
[n] J. Wieland, A. Romanov, A. Valishev, and G. Stancari, “Image based reconstruction of the Danilov-Nagaitsev integrable potential”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC19, unpublished.
[n] D. Merenich et al., “Test of a metamaterial structure for structure-based wakefield acceleration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 515-518. doi:10.18429/JACoW-IPAC2024-MOPR26
[n] J. S. Zhang et al., “Optimization Design of Four-Point Vibration Isolation Support for Spallation Neutron Source Vibration Magnet”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4352-4354. doi:10.18429/JACoW-IPAC2021-THPAB282
[n] J. E. Clendenin et al., “Beam Parameter Measurements for the SLAC Linear Collider”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D201, pp. 130-136.
[n] A. Mizrahi and L. Sch, “Optical Bragg Acceleration Structures”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19018, pp. XX-XX.
[n] M. Repov et al., “Development of a New Measurement System for Beam Position Pickups in the LINAC and Beam Energy Measurement (Time of Flight) in the MEBT for Medaustron”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 238-240. doi:10.18429/JACoW-IBIC2022-TUP10
[n] B. Liu and C.-Y. Tsai, “Formulas of coherent synchrotron radiation induced microbunching instability in an arbitrary four-dipole chicane bunch compressor”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 806-809. doi:10.18429/JACoW-IPAC2024-MOPS39
[n] N. Shurkhno, “Stochastic Cooling as Wiener Process”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 37-39. doi:10.18429/JACoW-COOL2017-TUP06
[n] J. M. Grames et al., “Ion Back-Bombardment of GaAs Photocathodes Inside DC High Voltage Electron Guns”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP045, pp. 2875-2877.
[n] K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
[n] C. H. Kuo, J. Chen, K.-T. Hsu, K. H. Hu, and D. Lee, “The Operating of Digital Beam Position Monitor in NSRRC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT090, pp. 2706-2708.
[n] S. R. Ghodke et al., “SF6 Gas Handling System for 3 MeV, 30 kW Industrial Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA094, pp. 779-781.
[n] A. G. Hinton, M. Kokole, T. Milhar, A. Shahveh, and B. J. A. Shepherd, “Design of a Permanent Magnet Based Dipole Quadrupole Magnet”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2784-2787. doi:10.18429/JACoW-IPAC2022-THPOTK009
[n] L. Schaechter, “PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP129G, pp. 851-853.
[n] M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “Monitoring the SKA Infrastructure for CICD”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 622-626. doi:10.18429/JACoW-ICALEPCS2023-TUPDP045
[n] Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
[n] S. Banna, D. Schieber, and L. Sch, “Scaling-Laws of Wake-Fields in Optical Structures”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19017, pp. XX-XX.
[n] T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3704-3707.
[n] W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240.
[n] V. I. Shvedunov et al., “Moscow State University CW Race-Track Microtron Status”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2059-2062.
[n] M. S. de Jong, “Industrial Involvement in the Construction of Synchrotron Light Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEILH04, pp. 206-210.
[n] A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4187-4189. doi:10.18429/JACoW-IPAC2019-THPTS037
[n] M. Xiao, T. Katayama, U. of Tokyo, and E. Forest, “DA Method and Symplectification for Field Map Generated Matrices of Siberian Snake in RHIC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDR6, pp. 404-406.
[n] G. Olry et al., “Spiral2 Cryomodules B Tests Results”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP010, pp. 95-99.
[n] W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
[n] E. Daly et al., “Procurements for LCLS-II Cryomodules at JLab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB110, pp. 1405-1408.
[n] T. Griesemer et al., “Design development and technological R&D for niobium-cladded beam production targets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4919-4922. doi:10.18429/JACoW-IPAC2023-THPM017
[n] D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2865-2868.
[n] D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88.
[n] E. L. Wright, C. Pearson, T. G. Lee, W. R. Fowkes, and G. Caryotakis, “PEP-II Prototype Klystron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1259-1262.
[n] A. Mondelli, C. Chang, A. Drobot, K. Ko, A. Mankofsky, and J. Petillo, “Application of the ARGUS Code to Accelerator Design Calculations”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 877-880.
[n] G. Eremeev and H. Padamsee, “emperature Map Studies on Nearly Oxide-Free, Thin-Oxide and Standard-Oxide Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE101, pp. XX-XX.
[n] F. M. Bieniosek et al., “Charge Stripper and MEBT for the $^3$He RFQ Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P111, pp. 3837-3839.
[n] K.-H. Park et al., “Precision Field Mapping System for Cyclotron Magnet”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT095, pp. 1378-1380.
[n] M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
[n] H. Piekarz, J. N. Blowers, S. Hays, and V. D. Shiltsev, “Record Fast Cycling Accelerator Magnet Based on High Temperature Superconductor”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 845-847. doi:10.18429/JACoW-NAPAC2019-WEPLH19
[n] D. Tronc et al., “The ELETTRA 1.5 GeV Electron Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3180-3183.
[n] K. J. Suthar, M. White, G. K. Mistri, A. K. Suthar, and S. K. Suthar, “Design and Development of AI Augmented Robot for Surveillance of High Radiation Facilities”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 192. doi:10.18429/JACoW-MEDSI2020-TUPC08
[n] T. Whitlatch et al., “Shipping and Alignment for the SNS Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH119, pp. 1488-1490.
[n] K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1513-1515. doi:10.18429/JACoW-IPAC2018-TUPMK011
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Li, H. P. Bohlen, and R. N. Tornoe, “IOT RF Power Sources for Pulsed and CW Linacs”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TH201, pp. 574-577.
- Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329.
- A. S. Chauchat, JP. Brasile, A. Binet, V. Le Flanchec, J-P. Nègre, and J.-M. Ortega, “Optimisation of an Inverse Compton Scattering Experiment with a Real Time Detection Scheme Based on a Radio Luminescent Screen and Comparison of the X-rays Beam Characteristics with Simulations”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR042, pp. 4068-4070.
- J. R. Calvey et al., “Measurements of Ion Instability and Emittance Growth for the APS-Upgrade”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 258-262.
- A. E. Wheelhouse, H. L. Gasson, N. Patel, D. H. Rowlands, R. Schnuerer, and I. Tahir, “The Linac Test Facility at Daresbury Laboratory”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 47-49.
- M. J. Christensen, M. J. Clarke, A. H. C. Mukai, J. M. C. Nilsson, M. Shetty, and T. S. Richter, “Software-based Event Formation at European Spallation Source”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOMPL004, pp. XX-XX.
- V. Nassisi, F. Belloni, D. Doria, A. Lorusso, M. V. Siciliano, and L. Velardi, “New Pulsed Current and Voltage Circuits Based on Transmission Lines”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH140, pp. 3122-3124.
- J. Beveridge et al., “Initial Operating Experience with the TRIUMF 300 keV H- Injection System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1707-1711.
- D. W. Peterson, S. J. Werkema, and P. Zhou, “Transverse Emittance Growth in the Fermilab Antiproton Accumulator with High-Current Antiproton Stacks”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3573-3576.
- C.-C. Kuo, H. P. Chang, K.-T. Hsu, and H. J. Tsai, “Vertical Beam Size Control at SRRC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE016, pp. 1148-1150.
- K. N. Li et al., “Development of the Control System for Some Heavy Nuclides Measurement AMS Facility”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA088, pp. XX-XX.
- J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
- J. Wieland, A. Romanov, A. Valishev, and G. Stancari, “Image based reconstruction of the Danilov-Nagaitsev integrable potential”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC19, unpublished.
- D. Merenich et al., “Test of a metamaterial structure for structure-based wakefield acceleration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR26, pp. 515-518.
- J. S. Zhang et al., “Optimization Design of Four-Point Vibration Isolation Support for Spallation Neutron Source Vibration Magnet”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4352-4354.
- J. E. Clendenin et al., “Beam Parameter Measurements for the SLAC Linear Collider”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper D201, pp. 130-136.
- A. Mizrahi and L. Sch, “Optical Bragg Acceleration Structures”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19018, pp. XX-XX.
- M. Repov et al., “Development of a New Measurement System for Beam Position Pickups in the LINAC and Beam Energy Measurement (Time of Flight) in the MEBT for Medaustron”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 238-240.
- B. Liu and C.-Y. Tsai, “Formulas of coherent synchrotron radiation induced microbunching instability in an arbitrary four-dipole chicane bunch compressor”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS39, pp. 806-809.
- N. Shurkhno, “Stochastic Cooling as Wiener Process”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 37-39.
- J. M. Grames et al., “Ion Back-Bombardment of GaAs Photocathodes Inside DC High Voltage Electron Guns”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP045, pp. 2875-2877.
- K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
- C. H. Kuo, J. Chen, K.-T. Hsu, K. H. Hu, and D. Lee, “The Operating of Digital Beam Position Monitor in NSRRC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT090, pp. 2706-2708.
- S. R. Ghodke et al., “SF6 Gas Handling System for 3 MeV, 30 kW Industrial Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA094, pp. 779-781.
- A. G. Hinton, M. Kokole, T. Milhar, A. Shahveh, and B. J. A. Shepherd, “Design of a Permanent Magnet Based Dipole Quadrupole Magnet”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2784-2787.
- L. Schaechter, “PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP129G, pp. 851-853.
- M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “Monitoring the SKA Infrastructure for CICD”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP045, pp. 622-626.
- Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
- S. Banna, D. Schieber, and L. Sch, “Scaling-Laws of Wake-Fields in Optical Structures”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19017, pp. XX-XX.
- T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3704-3707.
- W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240.
- V. I. Shvedunov et al., “Moscow State University CW Race-Track Microtron Status”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2059-2062.
- M. S. de Jong, “Industrial Involvement in the Construction of Synchrotron Light Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEILH04, pp. 206-210.
- A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4187-4189.
- M. Xiao, T. Katayama, U. of Tokyo, and E. Forest, “DA Method and Symplectification for Field Map Generated Matrices of Siberian Snake in RHIC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDR6, pp. 404-406.
- G. Olry et al., “Spiral2 Cryomodules B Tests Results”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP010, pp. 95-99.
- W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
- E. Daly et al., “Procurements for LCLS-II Cryomodules at JLab”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB110, pp. 1405-1408.
- T. Griesemer et al., “Design development and technological R&D for niobium-cladded beam production targets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM017, pp. 4919-4922.
- D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2865-2868.
- D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88.
- E. L. Wright, C. Pearson, T. G. Lee, W. R. Fowkes, and G. Caryotakis, “PEP-II Prototype Klystron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1259-1262.
- A. Mondelli, C. Chang, A. Drobot, K. Ko, A. Mankofsky, and J. Petillo, “Application of the ARGUS Code to Accelerator Design Calculations”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 877-880.
- G. Eremeev and H. Padamsee, “emperature Map Studies on Nearly Oxide-Free, Thin-Oxide and Standard-Oxide Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE101, pp. XX-XX.
- F. M. Bieniosek et al., “Charge Stripper and MEBT for the $^3$He RFQ Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P111, pp. 3837-3839.
- K.-H. Park et al., “Precision Field Mapping System for Cyclotron Magnet”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT095, pp. 1378-1380.
- M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
- H. Piekarz, J. N. Blowers, S. Hays, and V. D. Shiltsev, “Record Fast Cycling Accelerator Magnet Based on High Temperature Superconductor”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 845-847.
- D. Tronc et al., “The ELETTRA 1.5 GeV Electron Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3180-3183.
- K. J. Suthar, M. White, G. K. Mistri, A. K. Suthar, and S. K. Suthar, “Design and Development of AI Augmented Robot for Surveillance of High Radiation Facilities”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 192.
- T. Whitlatch et al., “Shipping and Alignment for the SNS Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH119, pp. 1488-1490.
- K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1513-1515.
Back to search