Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Babkin, G. Krainov, A. Ivanov, and V. Shirokov, “COMPACT 500 kV TANDEM ACCELERATOR ON THE BASE OF HIGH FREQENCY RECTIFIER AND GAS-FILLED FEEDTHROUGH INSULATOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUJP12, pp. XX-XX.
[n] J. W. J. Anton, P. Pradhan, D. Shu, and Yu. Shvyd'ko, “Design of Vacuum Chamber With Cryogenic Cooling of Samples for Bragg-Plane Slope Error Measurements”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 327. doi:10.18429/JACoW-MEDSI2020-WEPC10
[n] S. Anderson et al., “Commissioning of the Neptune Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA53, pp. 2006-2008.
[n] D. Raparia et al., “Bunch Shape Monitor for SSCL Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2426-2429.
[n] Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
[n] R. T. Acharya, D. W. Doll, K. Redler, and T. Van Hagan, “An Ogive Shaped Carbon-Carbon Composite Beam Stop”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA136, pp. 1393-1395.
[n] R. Garoby et al., “Linac4, a New Injector for the CERN PS Booster”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS057, pp. 1624-1626.
[n] T. Mimashi, N. Iida, H. Nakayama, T. Hatano, N. Shimizu, and A. Tokuchi, “High-Power Switch with SI-thyristors for the Power Supply of the KEKB Injection Kicker Magnet”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE114, pp. 2502-2504.
[n] B. Autin, J. P. Gourber, H. Laeger, and L. Thorndahl, “Measurement and Compensation of Space Charge Induced Q-Shifts in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 802-805.
[n] W. F. Bergan, “Plasma Simulations for an MBEC Cooler for the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1823-1826. doi:10.18429/JACoW-IPAC2021-TUPAB180
[n] N. Samadi, G. Lovric, C. Ozkan Loch, and X. Shi, “An X-Ray Beam Property Analyzer Based on Dispersive Crystal Diffraction”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 366-369. doi:10.18429/JACoW-IBIC2022-WE1C2
[n] Y. H. Park et al., “Progress and Status of RAON EBIS Charge Breeder”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR3WH02, unpublished.
[n] A. Tran and Y. Hao, “Beam tomography with coupling using maximum entropy technique”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3944-3947. doi:10.18429/JACoW-IPAC2023-THOGB2
[n] K. Hiramoto and M. Nishi, “A Particle Tracking Method for Accelerators with Small Radius of Curvature”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 717-720.
[n] V. H. Ranjbar, V. Lebedev, E. Lorman, and A. Xiao, “Commissioning of the Head-tail Monitoring Application for the Tevatron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT137, pp. 2780-2782.
[n] L. Sabbatini et al., “Fast Ramped Dipole and DC Quadrupoles Design for the Beam Test Facility Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3638-3640. doi:10.18429/JACoW-IPAC2018-THPAL011
[n] M. Znidarcic, B. B. Baricevic, R. Hrovatin, J. M. Carmona, A. Ibarra, and I. Podadera, “Testing of New Hadron Beam Phase and Position Monitor at CIEMAT Laboratory”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD26, pp. 104-106.
[n] N. Sitaraman et al., “Progress on Zirconium-Doped Niobium Surfaces”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 398-400. doi:10.18429/JACoW-SRF2023-TUPTB004
[n] J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179.
[n] C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 15-18. doi:10.18429/JACoW-IBIC2022-MOP01
[n] R. A. Rimmer et al., “High-Power Testing of RF Cavities for the PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P040, pp. 3004-3006.
[n] Y. P. Sun, “Synchrotron Accumulation on Off-Energy Closed-Orbit with Anti-Septum or Nonlinear Kicker”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1280-1282. doi:10.18429/JACoW-IPAC2018-TUPMF014
For LaTeX
Use Complete Form
For BibTeX
References
- A. Babkin, G. Krainov, A. Ivanov, and V. Shirokov, “COMPACT 500 kV TANDEM ACCELERATOR ON THE BASE OF HIGH FREQENCY RECTIFIER AND GAS-FILLED FEEDTHROUGH INSULATOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUJP12, pp. XX-XX.
- J. W. J. Anton, P. Pradhan, D. Shu, and Yu. Shvyd'ko, “Design of Vacuum Chamber With Cryogenic Cooling of Samples for Bragg-Plane Slope Error Measurements”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 327.
- S. Anderson et al., “Commissioning of the Neptune Photoinjector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA53, pp. 2006-2008.
- D. Raparia et al., “Bunch Shape Monitor for SSCL Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2426-2429.
- Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
- R. T. Acharya, D. W. Doll, K. Redler, and T. Van Hagan, “An Ogive Shaped Carbon-Carbon Composite Beam Stop”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA136, pp. 1393-1395.
- R. Garoby et al., “Linac4, a New Injector for the CERN PS Booster”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS057, pp. 1624-1626.
- T. Mimashi, N. Iida, H. Nakayama, T. Hatano, N. Shimizu, and A. Tokuchi, “High-Power Switch with SI-thyristors for the Power Supply of the KEKB Injection Kicker Magnet”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE114, pp. 2502-2504.
- B. Autin, J. P. Gourber, H. Laeger, and L. Thorndahl, “Measurement and Compensation of Space Charge Induced Q-Shifts in the CERN Intersecting Storage Rings (ISR)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 802-805.
- W. F. Bergan, “Plasma Simulations for an MBEC Cooler for the EIC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1823-1826.
- N. Samadi, G. Lovric, C. Ozkan Loch, and X. Shi, “An X-Ray Beam Property Analyzer Based on Dispersive Crystal Diffraction”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 366-369.
- Y. H. Park et al., “Progress and Status of RAON EBIS Charge Breeder”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR3WH02, unpublished.
- A. Tran and Y. Hao, “Beam tomography with coupling using maximum entropy technique”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THOGB2, pp. 3944-3947.
- K. Hiramoto and M. Nishi, “A Particle Tracking Method for Accelerators with Small Radius of Curvature”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 717-720.
- V. H. Ranjbar, V. Lebedev, E. Lorman, and A. Xiao, “Commissioning of the Head-tail Monitoring Application for the Tevatron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT137, pp. 2780-2782.
- L. Sabbatini et al., “Fast Ramped Dipole and DC Quadrupoles Design for the Beam Test Facility Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3638-3640.
- M. Znidarcic, B. B. Baricevic, R. Hrovatin, J. M. Carmona, A. Ibarra, and I. Podadera, “Testing of New Hadron Beam Phase and Position Monitor at CIEMAT Laboratory”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD26, pp. 104-106.
- N. Sitaraman et al., “Progress on Zirconium-Doped Niobium Surfaces”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB004, pp. 398-400.
- J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179.
- C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 15-18.
- R. A. Rimmer et al., “High-Power Testing of RF Cavities for the PEP-II B Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P040, pp. 3004-3006.
- Y. P. Sun, “Synchrotron Accumulation on Off-Energy Closed-Orbit with Anti-Septum or Nonlinear Kicker”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1280-1282.
Back to search