JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. J. Barnes and G. D. Wait, “Results of Calculations on the Beam Deflection Due to the 1 MHz Chopper for the Koan Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 967-970. 
[n]	K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46. 
[n]	N. Andreev et al., “The 1 m Long Single Aperture Dipole Coil Test Program for LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP027G, pp. 2258-2260. 
[n]	V. P. Suller et al., “Status of the CAMD Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE050, pp. 3103-3105. 
[n]	M. Sapinski et al., “Estimation of Thresholds for the Signals of the BLMs around the LHC Final Focus Triplet Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR037, pp. 4053-4055. 
[n]	R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583. 
[n]	M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848. 
[n]	H. H. Braun, S. Rosander, and M. Valentini, “Second Order Beam-Loading Compensation in the Drive-Beam Accelerator of the CLIC Test Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B04, pp. 510-512. 
[n]	V. N. Litvinenko, “Performance of High Intensity γ-Rays Source Driven by the Duke Storage Ring FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA010, pp. 657-659. 
[n]	M. J. Barnes, F. Caspers, L. Ducimetiere, N. Garrel, and T. Kroyer, “An Improved Beam Screen for the LHC Injection Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN086, pp. 1574-1576. 
[n]	Y.-N. Rao and R. A. Baartman, “Transverse Phase Space Tomography in TRIUMF Injection Beamline”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC064, pp. 1144-1146. 
[n]	H. H. J. Ten Kate et al., “Development of a 10 T Nb3Sn Twin Aperture Model Dipole Magnet for the CERN LHC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1157-1160. 
[n]	J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3782-3784. doi:10.18429/JACoW-IPAC2023-WEPM089
[n]	C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3779-3781. doi:10.18429/JACoW-IPAC2023-WEPM088
[n]	S. F. Mikhailov, V. N. Litvinenko, and Y. Wu, “Low Emittance Lattices for the Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH125, pp. 3528-3530. 
[n]	J. Takacs, “Beam Scanner for the Oxford Electrostatic Tandem Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 980-985. 
[n]	B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411. 
[n]	R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395. 
[n]	S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699. 
[n]	V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836. 
[n]	L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX. 
[n]	R. K. Bhandari, “Status of the Calcutta K500 Superconduction Cyclotron Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-4, pp. XX-XX. 
[n]	Y. Yano, A. Goto, M. Kase, and T. Katayama, “RI Beam Factory Project at RIKEN”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-1, pp. XX-XX. 
[n]	U. Bartz, D. Ficek, N. Mueller, A. Schempp, J. Thibus, and M. Vossberg, “The Frankfurt Funneling Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS037, pp. 1574-1576. 
[n]	D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX. 
[n]	J. G. Alessi et al., “Construction of the BNL EBIS Preinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP025, pp. 407-409. 
[n]	H. Chen, C.-W. Chen, T.-Y. Chung, and F.-Y. Lin, “Development of Hall probe system for accurate field mapping at NSRRC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3815-3818. doi:10.18429/JACoW-IPAC2023-WEPM106
[n]	V. Litvinenko et al., “Status of R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS076, pp. 1347-1349. 
[n]	M. Boege et al., “Recent Results on Energy Calibration at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP15H, pp. 409-411. 
[n]	F. Sonnemann, K. Dahlerup-Petersen, F. Rodriguez-Mateos, and R. Schmidt, “Energy Extraction for the LHC Superconducting Circuits”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH093, pp. 3448-3450. 
[n]	L. Ducimetiere, M. J. Barnes, N. Garrel, and G. D. Wait, “The LHC Injection Kicker Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE036, pp. 1162-1164. 
[n]	A. Laisne, “More About a Universal Compact Isochronous Superconducting Cyclotron Archetype”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-07, pp. 684-686. 
[n]	R. Maier, D. Prasuhn, W. Schwab, H. J. Stein, and J. Witt, “Operational Characteristics of the COSY Electron Cooler”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1200-1203. 
[n]	V. N. Litvinenko, S. F. Mikhailov, O. A. Shevchenko, and Y. Wu, “Project for Generation of Femtosecond X-ray Beams from the Duke Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH071, pp. 2614-2616. 
[n]	F. E. Mills, “Early FFAG Development”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper D-1, pp. XX-XX. 
[n]	S. Hartman, V. N. Litvinenko, I. Pinayev, G. Swift, and Y. Wu, “Control System Design and Upgrade Considerations for the Duke Free Electron Laser Laboratory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH009, pp. 785-787. 
[n]	N. Mueller et al., “The Frankfurt Funneling Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN018, pp. 1431-1433. 
[n]	N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919. 
[n]	M. A. Wilson et al., “NIST-Los Alamos Racetrack Microtron Status”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU2-07, pp. 255-258. 
[n]	W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408. 
[n]	H. H. Braun, M. Luong, I. Wilson, and W. Wuensch, “A Very-High-Gradient Test of a 30 GHz Single-Cell Cavity”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOCF101, pp. 271-273. 
[n]	P. Pugnat, F. Rodriguez-Mateos, S. Sanfilippo, R. Schmidt, A. Siemko, and F. Sonnemann, “Quench Heater Experiments on the LHC Main Superconducting Magnets”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A04, pp. 2154-2156. 
[n]	N. Siegel, “Overview of the LHC Magnets other than the Main Dipoles”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUXF201, pp. 23-27. 
[n]	D. S. Barton, “Heavy Ion Program at BNL:  AGS,  RHIC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 804-809. 
[n]	T.-Y. Chung, C.-H. Chang, H. Chen, and F.-Y. Lin, “Tapered APPLE undulators at TPS”, presented at the IPAC'26, Deauville, France, May 2026, paper MOO7M02, unpublished. 
[n]	G. D. Wait, M. J. Barnes, D. Bishop, C. B. Figley, and G. Waters, “Prototype Studies of a 1 MHz Chopper for the KOAN Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 964-967. 
[n]	R. I. Cutler and L. Young, “Performance of the High Power RF System for the NIST - Los Alamos Racetrack Microtron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-19, pp. 574-576. 
[n]	M. J. Barnes and G. D. Wait, “Effect of Saturating Ferrite on the Field in a Prototype Kicker Magnet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2544-2547. 
[n]	R. Maier and U. Hacker, “Beam Diagnostic for COSY-Juelich”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1574-1577. 
[n]	F. W. Jones, R. A. Baartman, I. V. Bylinskii, and Y.-N. Rao, “Simulation Study of Halo Collimation in the TRIUMF Ariel Proton Beam Line”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 557-560. doi:10.18429/JACoW-IPAC2017-MOPIK028
[n]	D. Leroy, M. Castiglioni, and D. Hagedorn, “A 5m Long Impregnated NbTi Dipole Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3701-3704. 
[n]	Y.-N. Rao, R. A. Baartman, and T. Planche, “Correction of r-z=1 Resonance in TRIUMF Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3492-3495. doi:10.18429/JACoW-IPAC2018-THPAK110
[n]	R. Maier et al., “Non-Beam Disturbing Diagnostics at COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 800-803. 
[n]	B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432. 
[n]	M. J. Barnes, G. D. Wait, and I. M. Wilson, “Comparison of Field Quality in Lumped Inductance versus Transmission Line Kicker Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2547-2550. 
[n]	A. Laisne, “The Realisation of the Magnetic Circuit of the AGOR Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1172-1175. 
[n]	J. Dietrich et al., “Beam Diagnostics at COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1088-1091. 
[n]	G. Waters, M. J. Barnes, D. Bishop, and G. D. Wait, “Controls and Interlocks for a Prototype 1 MHz Beam Chopper”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1531-1534. 
[n]	Y. Wu, E. Forest, H. Nishimura, D. S. Robin, A. Wolski, and V. N. Litvinenko, “Symplectic Models for General Insertion Devices”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB010, pp. 459-461. 
[n]	T. Kramer et al., “Studies of Beam Losses from Failures of SPS Beam Dump Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN097, pp. 1607-1609. 
[n]	H. H. Braun et al., “Emittance Growth and Energy Loss Due to Coherent Synchrotron Radiation in the Bunch Compressor of the CLIC Test Facility CTF II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B11, pp. 471-473. 
[n]	K. Aulenbacher, H. H. Braun, F. Chautard, R. Corsini, J. H. B. Madsen, and L. Rinolfi, “Bunch Compressor Performances at the CLIC Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP015G, pp. 480-482. 
[n]	G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173. 
[n]	Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX. 
[n]	L. Bottura et al., “Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B18, pp. 2145-2147. 
[n]	R. Assmann et al., “Observation of Radiative Spin-Polarization at 60.6 GeV”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP23, pp. 2999-3001. 
[n]	T. Ludwig et al., “Measurement of H2 Stripping Cross Sections in Carbon and Aluminium Foils (with some additional data for AL203)”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1352-1355. 
[n]	M. J. Barnes and G. D. Wait, “Low Power Measurements on an AGS Injection Kicker Magnet”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN069, pp. 2188-2190. 
[n]	J.-C. Huang, C.-S. Yang, P.-S. Chuang, H. Kitamura, and C.-L. Chen, “Cryogenic permanent magnet undulator at high beam currents”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3794-3796. doi:10.18429/JACoW-IPAC2024-THPS26

For LaTeX

Use Complete Form

For BibTeX

References

Back to search