Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 863-865. doi:10.18429/JACoW-LINAC2018-THPO076
[n] K. Moriyama, T. Nakatani, H. O. Ohshita, T. Tomohiro, and Y. Yasu, “Development of Status Analysis System Based on ELK Stack at J-PARC MLF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1423-1427. doi:10.18429/JACoW-ICALEPCS2017-THPHA033
[n] P. Sudmuang et al., “Commisioning of the 2.4T Multipole Wiggler and the 6.5T Superconducting Wavelength Shifter at the SIAM Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1192-1194. doi:10.18429/JACoW-IPAC2014-TUPRO068
[n] N. Suradet, Ch. Dhammatong, S. Klinkhieo, P. Klysubun, and C. P. Preecha, “Web Based Machine Status Display for the Siam Photon Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO028, pp. 213-215.
[n] M. Broseta et al., “Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between FPGA Cores”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1012-1016. doi:10.18429/JACoW-ICALEPCS2017-WEAPL01
[n] N. Zhang and Y. B. Leng, “Embedded EPICS IOC Data Acquisition System for Beam Instability Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC117, pp. 1290-1292.
[n] B. Dalena, A. Chanc?®, R. De Maria, and J. Payet, “Alternative High Luminosity LHC Matching Section Layout”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 990-992. doi:10.18429/JACoW-IPAC2014-TUPRO001
[n] B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
[n] T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 987-989. doi:10.18429/JACoW-IPAC2014-TUOCB03
[n] M. Ishii, T. Fukui, Y. Furukawa, T. Nakatani, and T. Ohata and R, “Upgrade of SPring-8 Beamline Network with VLAN Technology over Gigabit Ethernet”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP056, pp. XX-XX.
[n] N. Juntong and S. Krainara, “The New 118 MHz Normal Conducting RF Cavity for SIAM Photon Source at SLRI”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3896-3898. doi:10.18429/JACoW-IPAC2014-THPRI055
[n] K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 834-837. doi:10.18429/JACoW-ICALEPCS2015-WEPGF060
[n] Z. T. Zhao, B. C. Jiang, Y. B. Leng, S. Q. Tian, L. Yin, and W. Z. Zhang, “Performance Optimization and Upgrade of the SSRF Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA045, pp. 178-180.
[n] J. B. González Fernández, V. H. Haghighat, S. A. McDonald, K. Nygård, and L. K. Roslund, “ForMAX: A Beamline for Multi-Scale and Multi-Modal Structural Characterisation of Hierarchical Materials”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 15-18. doi:10.18429/JACoW-MEDSI2023-TUOBM01
[n] N. Janvier, J. M. Clement, P. Fajardo, and G. Cuni, “IcePAP: An Advanced Motor Controller for Scientific Applications in Large User Facilities”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC081, pp. 766-769.
[n] G. Cuni et al., “BL13-XALOC, MX experiments at Alba: Current Status and Ongoing Improvements”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC061, pp. 714-717.
[n] T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
[n] J. Faure and B. Gastineau, “Heavy Ion Sources at SATURNE”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0007, pp. 103-105.
[n] Z. Mart?â et al., “Fast Orbit Response Matrix Measurements at ALBA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 365-367. doi:10.18429/JACoW-IPAC2017-MOPAB102
[n] N. Suradet et al., “Improvement of Hardware and Software Setup for the Acquisition and Processing of SIAM Photon Source BPM Signal”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA34, pp. 130-132.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX.
[n] T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
[n] A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 114-117. doi:10.18429/JACoW-MEDSI2018-TUPH34
[n] S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
[n] L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 652-655. doi:10.18429/JACoW-ICALEPCS2015-WED3O04
[n] D. Schmied, E. Burtin, J. M. Chaize, R. Kersevan, I. Parat, and P. V. Verdier, “Presentation of the New ESRF Vacuum Control Applications from an Operational Point of View”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP012, pp. 1550-1552.
[n] Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n] T. T. Taniuchi et al., “Upgrade of a Photocathode RF Gun at SPring-8”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS18, pp. XX-XX.
[n] T. Honma et al., “Present Status of HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
[n] H. Nishimura, S. James, K. Muriki, Y. Qin, K. Song, and C. Sun, “GPU Computing for Particle Tracking”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP150, pp. 1764-1766.
[n] E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
[n] C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1138-1142. doi:10.18429/JACoW-ICALEPCS2015-THHC3O03
[n] F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 329-331. doi:10.18429/JACoW-IPAC2017-MOPAB089
[n] M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n] F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
[n] J. Bae, L. Cultrera, P. Digiacomo, and I. V. Bazarov, “Long Lifetime Spin-Polarized GaAs Photocathode Activated by Cs2Te”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1589-1592. doi:10.18429/JACoW-IPAC2018-TUPML025
[n] A. Valfells et al., “Initial Studies of Longitudinal Dynamics on UMER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG020, pp. 2312-2314.
[n] R. Bourtembourg, J. L. Pons, and P. V. Verdier, “How Cassandra Improves Performances and Availability of HDB++ Tango Archiving System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 685-688. doi:10.18429/JACoW-ICALEPCS2015-WEM310
[n] P. Piot and G. W. Foster, “An Electron Front End for the Fermilab Multi-species 8 GeV SCRF Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT117, pp. 809-811.
[n] P. Klysubun et al., “Beam Diagnostics at Siam Photon Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 410-412. doi:10.18429/JACoW-IBIC2016-TUPG33
[n] K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 102-105. doi:10.18429/JACoW-NAPAC2016-MOPOB14
[n] K. Bertsche et al., “PEP-II status”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH05, pp. XX-XX.
[n] S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 413-416. doi:10.18429/JACoW-ICALEPCS2015-MOPGF140
[n] N. Zhang, F. Z. Chen, and Y. M. Zhou, “Filling Pattern Measurement System Upgrade in SSRF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4791-4793. doi:10.18429/JACoW-IPAC2018-THPML066
[n] S. Klinkhieo et al., “Improvement of the SIAM Photon Source Storage Ring BPM System”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA21, pp. 101-103.
[n] P. V. Verdier, F. Poncet, J. L. Pons, and N. Leclercq, “Tango Control System Management Tool”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN002, pp. 713-716.
[n] K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85.
[n] A. Olmos et al., “First Steps Towards a Fast Orbit Feedback at ALBA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC22, pp. 727-730.
[n] D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
[n] S. Y. Chen, D. Bertwistle, K. Kei, C. Murray, and T. M. Pedersen, “Application of a NEG Coated Chamber at the Canadian Light Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 205-208. doi:10.18429/JACoW-MEDSI2016-TUPE19
[n] C. Sun, S. James, K. Muriki, H. Nishimura, Y. Qin, and K. Song, “HPC Cloud Applied to Lattice Optimization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP151, pp. 1767-1769.
[n] B. Dalena et al., “Fringe Fields Modeling for the High Luminosity LHC Large Aperture Quadrupoles”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 993-996. doi:10.18429/JACoW-IPAC2014-TUPRO002
[n] T. Honda, Y. Hori, and M. Tadano, “Suppression of Bunched Beam Induced Heating at the DCCT Toroid”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP28F, pp. 1526-1528.
[n] L. Pivetta et al., “New Developments for the HDB++ TANGO Archiving System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 801-805. doi:10.18429/JACoW-ICALEPCS2017-TUPHA166
[n] J. T. Paul, R. G. Hennig, I. V. Bazarov, A. Galdi, S. S. Karkare, and H. A. Padmore, “Computational Screening for Low Emittance Photocathodes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4755-4758. doi:10.18429/JACoW-IPAC2018-THPML053
[n] C. Y. Kuo, C.-H. Chang, M.-H. Huang, C.-S. Hwang, J. C. Jan, and F.-Y. Lin, “Design and Performance of Various kinds of Corrector Magnets for the Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD014, pp. 3524-3526.
[n] K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363.
[n] P. V. Verdier, “Re-Writing TANGO Code Generator Using openArchitectureWare Technology”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP080, pp. 827-829.
[n] M. Walter et al., “Electro-Mechanical Design for Injection in the University of Maryland Electron Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB025, pp. 1673-1675.
[n] H. Nishimura et al., “Lattice Optimization Using Jupyter Notebook on HPC Clusters”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2818-2820. doi:10.18429/JACoW-IPAC2017-WEPAB101
[n] X. W. Du, J. Chen, Z. K. Liu, Q. P. Wang, Z. Wang, and S. Wei, “Progress of Beamlines Design and Key Technologies of Hefei Advanced Light Facility”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper TUOAM03, unpublished.
[n] G. H. Wei et al., “Beam Injection Tuning of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB015, pp. 3915-3917.
[n] S. S. Karkare et al., “Physical and Chemical Roughness of Alkali-Animonide Cathodes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4259-4262. doi:10.18429/JACoW-IPAC2018-THPMF080
[n] A. Mochihashi, Y. Hori, M. Hosaka, M. Katoh, M. Shimada, and Y. Takashima, “Touschek Lifetime Measurement with a Spurious Bunch in UVSOR-II Electron Storage Ring”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB22, pp. 280-282.
[n] G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193.
[n] G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2271-2274.
[n] O. Matilla et al., “Em# Platform: Towards a Hardware Interface Standardization Scheme”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 885-888. doi:10.18429/JACoW-ICALEPCS2015-WEPGF081
[n] H. Butler and T. Collins, “Opening Remarks on Computer Control”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 336-337.
[n] D. F. C. Fernandez-Carreiras et al., “Personnel Protection, Equipment Protection and Fast Interlock Systems: Three Different Technologies to Provide Protection at Three Different Levels”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU005, pp. 1055-1057.
[n] A. Ijspeert, M. Begg, and T. M. Taylor, “Construction and Test of Superconducting Quadrupoles for the LEP2 Low-Beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2277-2280.
[n] T. Okada et al., “Improvement of Cavity Performance by Nitrogen Doping at KEK”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 480-483. doi:10.18429/JACoW-LINAC2018-TUPO065
[n] T. Iwashita et al., “Induction Acceleration System for KEK Digital Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC051, pp. 573-575.
[n] R. M. Jones and N. Juntong, “HOM and FP Coupler Design for the NLSF High Gradient SC Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC107, pp. 325-327.
[n] W.-T. Liao, C. H. Keitel, and A. P?ílffy, “The Potential Uses of X-ray FELs in Nuclear Studies”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOCNO03, pp. 749-752.
[n] T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3704-3707.
[n] F. G. Yang et al., “Thermal-Deformation-Based X-Ray Active Optics Development in IHEP”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 10-14. doi:10.18429/JACoW-MEDSI2023-TUOAM05
[n] K. Fukami et al., “Beam Collimation System for the SPring-8 Top-up Operation”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15009, pp. XX-XX.
[n] J. M. Jowett and T. M. Taylor, “Wigglers for Control of Beam Characteristics in LEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2581-2584.
[n] C. Hovjat et al., “The Multiturn Charge Exchange Injection System for the Fermilab Booster Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3149-3152.
[n] K. Moriyama, H. Hasemi, and Y. Inamura, “Towards next-generation instrument control framework for neutron experiments at MLF, J-PARC”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1683-1689. doi:10.18429/JACoW-ICALEPCS2025-THPD043
For LaTeX
Use Complete Form
For BibTeX
References
- M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 863-865.
- K. Moriyama, T. Nakatani, H. O. Ohshita, T. Tomohiro, and Y. Yasu, “Development of Status Analysis System Based on ELK Stack at J-PARC MLF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1423-1427.
- P. Sudmuang et al., “Commisioning of the 2.4T Multipole Wiggler and the 6.5T Superconducting Wavelength Shifter at the SIAM Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1192-1194.
- N. Suradet, Ch. Dhammatong, S. Klinkhieo, P. Klysubun, and C. P. Preecha, “Web Based Machine Status Display for the Siam Photon Source”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO028, pp. 213-215.
- M. Broseta et al., “Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between FPGA Cores”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1012-1016.
- N. Zhang and Y. B. Leng, “Embedded EPICS IOC Data Acquisition System for Beam Instability Research”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC117, pp. 1290-1292.
- B. Dalena, A. Chanc?®, R. De Maria, and J. Payet, “Alternative High Luminosity LHC Matching Section Layout”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 990-992.
- B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
- T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 987-989.
- M. Ishii, T. Fukui, Y. Furukawa, T. Nakatani, and T. Ohata and R, “Upgrade of SPring-8 Beamline Network with VLAN Technology over Gigabit Ethernet”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP056, pp. XX-XX.
- N. Juntong and S. Krainara, “The New 118 MHz Normal Conducting RF Cavity for SIAM Photon Source at SLRI”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3896-3898.
- K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 834-837.
- Z. T. Zhao, B. C. Jiang, Y. B. Leng, S. Q. Tian, L. Yin, and W. Z. Zhang, “Performance Optimization and Upgrade of the SSRF Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA045, pp. 178-180.
- J. B. González Fernández, V. H. Haghighat, S. A. McDonald, K. Nygård, and L. K. Roslund, “ForMAX: A Beamline for Multi-Scale and Multi-Modal Structural Characterisation of Hierarchical Materials”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUOBM01, pp. 15-18.
- N. Janvier, J. M. Clement, P. Fajardo, and G. Cuni, “IcePAP: An Advanced Motor Controller for Scientific Applications in Large User Facilities”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC081, pp. 766-769.
- G. Cuni et al., “BL13-XALOC, MX experiments at Alba: Current Status and Ongoing Improvements”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC061, pp. 714-717.
- T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
- J. Faure and B. Gastineau, “Heavy Ion Sources at SATURNE”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0007, pp. 103-105.
- Z. Mart?â et al., “Fast Orbit Response Matrix Measurements at ALBA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 365-367.
- N. Suradet et al., “Improvement of Hardware and Software Setup for the Acquisition and Processing of SIAM Photon Source BPM Signal”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA34, pp. 130-132.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX.
- T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
- A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 114-117.
- S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
- L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 652-655.
- D. Schmied, E. Burtin, J. M. Chaize, R. Kersevan, I. Parat, and P. V. Verdier, “Presentation of the New ESRF Vacuum Control Applications from an Operational Point of View”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP012, pp. 1550-1552.
- Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 141-144.
- T. T. Taniuchi et al., “Upgrade of a Photocathode RF Gun at SPring-8”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS18, pp. XX-XX.
- T. Honma et al., “Present Status of HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
- H. Nishimura, S. James, K. Muriki, Y. Qin, K. Song, and C. Sun, “GPU Computing for Particle Tracking”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP150, pp. 1764-1766.
- E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
- C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1138-1142.
- F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 329-331.
- M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 80-83.
- F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
- J. Bae, L. Cultrera, P. Digiacomo, and I. V. Bazarov, “Long Lifetime Spin-Polarized GaAs Photocathode Activated by Cs2Te”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1589-1592.
- A. Valfells et al., “Initial Studies of Longitudinal Dynamics on UMER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG020, pp. 2312-2314.
- R. Bourtembourg, J. L. Pons, and P. V. Verdier, “How Cassandra Improves Performances and Availability of HDB++ Tango Archiving System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 685-688.
- P. Piot and G. W. Foster, “An Electron Front End for the Fermilab Multi-species 8 GeV SCRF Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT117, pp. 809-811.
- P. Klysubun et al., “Beam Diagnostics at Siam Photon Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 410-412.
- K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 102-105.
- K. Bertsche et al., “PEP-II status”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH05, pp. XX-XX.
- S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 413-416.
- N. Zhang, F. Z. Chen, and Y. M. Zhou, “Filling Pattern Measurement System Upgrade in SSRF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4791-4793.
- S. Klinkhieo et al., “Improvement of the SIAM Photon Source Storage Ring BPM System”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA21, pp. 101-103.
- P. V. Verdier, F. Poncet, J. L. Pons, and N. Leclercq, “Tango Control System Management Tool”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN002, pp. 713-716.
- K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85.
- A. Olmos et al., “First Steps Towards a Fast Orbit Feedback at ALBA”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC22, pp. 727-730.
- D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
- S. Y. Chen, D. Bertwistle, K. Kei, C. Murray, and T. M. Pedersen, “Application of a NEG Coated Chamber at the Canadian Light Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 205-208.
- C. Sun, S. James, K. Muriki, H. Nishimura, Y. Qin, and K. Song, “HPC Cloud Applied to Lattice Optimization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP151, pp. 1767-1769.
- B. Dalena et al., “Fringe Fields Modeling for the High Luminosity LHC Large Aperture Quadrupoles”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 993-996.
- T. Honda, Y. Hori, and M. Tadano, “Suppression of Bunched Beam Induced Heating at the DCCT Toroid”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP28F, pp. 1526-1528.
- L. Pivetta et al., “New Developments for the HDB++ TANGO Archiving System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 801-805.
- J. T. Paul, R. G. Hennig, I. V. Bazarov, A. Galdi, S. S. Karkare, and H. A. Padmore, “Computational Screening for Low Emittance Photocathodes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4755-4758.
- C. Y. Kuo, C.-H. Chang, M.-H. Huang, C.-S. Hwang, J. C. Jan, and F.-Y. Lin, “Design and Performance of Various kinds of Corrector Magnets for the Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD014, pp. 3524-3526.
- K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 360-363.
- P. V. Verdier, “Re-Writing TANGO Code Generator Using openArchitectureWare Technology”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP080, pp. 827-829.
- M. Walter et al., “Electro-Mechanical Design for Injection in the University of Maryland Electron Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB025, pp. 1673-1675.
- H. Nishimura et al., “Lattice Optimization Using Jupyter Notebook on HPC Clusters”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2818-2820.
- X. W. Du, J. Chen, Z. K. Liu, Q. P. Wang, Z. Wang, and S. Wei, “Progress of Beamlines Design and Key Technologies of Hefei Advanced Light Facility”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUOAM03, unpublished.
- G. H. Wei et al., “Beam Injection Tuning of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB015, pp. 3915-3917.
- S. S. Karkare et al., “Physical and Chemical Roughness of Alkali-Animonide Cathodes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4259-4262.
- A. Mochihashi, Y. Hori, M. Hosaka, M. Katoh, M. Shimada, and Y. Takashima, “Touschek Lifetime Measurement with a Spurious Bunch in UVSOR-II Electron Storage Ring”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB22, pp. 280-282.
- G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193.
- G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2271-2274.
- O. Matilla et al., “Em# Platform: Towards a Hardware Interface Standardization Scheme”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 885-888.
- H. Butler and T. Collins, “Opening Remarks on Computer Control”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 336-337.
- D. F. C. Fernandez-Carreiras et al., “Personnel Protection, Equipment Protection and Fast Interlock Systems: Three Different Technologies to Provide Protection at Three Different Levels”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU005, pp. 1055-1057.
- A. Ijspeert, M. Begg, and T. M. Taylor, “Construction and Test of Superconducting Quadrupoles for the LEP2 Low-Beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2277-2280.
- T. Okada et al., “Improvement of Cavity Performance by Nitrogen Doping at KEK”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 480-483.
- T. Iwashita et al., “Induction Acceleration System for KEK Digital Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC051, pp. 573-575.
- R. M. Jones and N. Juntong, “HOM and FP Coupler Design for the NLSF High Gradient SC Cavity”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC107, pp. 325-327.
- W.-T. Liao, C. H. Keitel, and A. P?ílffy, “The Potential Uses of X-ray FELs in Nuclear Studies”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOCNO03, pp. 749-752.
- T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3704-3707.
- F. G. Yang et al., “Thermal-Deformation-Based X-Ray Active Optics Development in IHEP”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUOAM05, pp. 10-14.
- K. Fukami et al., “Beam Collimation System for the SPring-8 Top-up Operation”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15009, pp. XX-XX.
- J. M. Jowett and T. M. Taylor, “Wigglers for Control of Beam Characteristics in LEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2581-2584.
- C. Hovjat et al., “The Multiturn Charge Exchange Injection System for the Fermilab Booster Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3149-3152.
- K. Moriyama, H. Hasemi, and Y. Inamura, “Towards next-generation instrument control framework for neutron experiments at MLF, J-PARC”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1683-1689.
Back to search