Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Rusnak and A. Shapiro, “Test Results for a Heat-Treated 4-Cell 805-MHz Superconducting Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP10, pp. 1636-1638.
[n] E. Acerbi et al., “Operational Experience with the Superconducting Coils of the Milan K800 Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F3-04, pp. 232-235.
[n] T. J. Shea, D. W. Feldman, R. B. Fiorito, C. Maxey, T. J. McManamy, and A. G. Shkvarunets, “Status of Beam Imaging Developments for the SNS Target”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOC04, pp. 38-40.
[n] T. Furuya et al., “Beam Test of a Superconducting Damped Cavity for KEKB”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P027, pp. 3087-3089.
[n] J. W. G. Thomason, D. C. Faircloth, R. Sidlow, C. M. Thomas, and M. Whitehead, “The Effect of Extraction Geometry on the Measured ISIS H Minus Ion Source Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT141, pp. 1458-1460.
[n] P. Martin et al., “Antiproton Acceleration in the Fermilab Main Ring and Tevatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 47-50.
[n] H. P. Bluem, A. M. M. Todd, and G. R. Neil, “Superconducting RF Injector for High-Power Free-Electron Lasers (FEL)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPB011, pp. 92-94.
[n] K. Akai et al., “The ARES Cavity for the KEK B-Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP054L, pp. 2008-2010.
[n] A. S. Setty, “Beam Dynamics Tools for Linacs Design”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB064, pp. 987-989.
[n] J. Fullerton, L. K. Jensen, and J. Spanggaard, “Software Renovation of CERN's Experimental Areas”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS034, pp. 409-411.
[n] S. Suzuki et al., “Latest Improvements of the SPring-8 Linac for High Reliability”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP094, pp. 276-278.
[n] B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
[n] H. Ito et al., “Lower Critical Field Measurement of NbN Multilayer Thin Film Superconductor at KEK”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 632-636. doi:10.18429/JACoW-SRF2019-TUP078
[n] M. L. Langlois, M. Cornelis, F. P?®rez, and P. Sanchez, “Measurements on the Rf Cavity for the ALBA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP097, pp. 781-783.
[n] J. Le Duff, C. Thomas, G. Bienvenu, H. Sun, M. Fouaidy, and R. Parodi, “RF Pulsed Tests on 3 GHz Niobium Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP107, pp. 913-915.
[n] L. Lari, H. Gaillard, and V. Mertens, “Scheduling the Installation of the LHC Injection Lines”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT024, pp. 1879-1881.
[n] J. P. Holzbauer et al., “Passive Microphonics Mitigation during LCLS-II Cryomodule Testing at Fermilab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2668-2670. doi:10.18429/JACoW-IPAC2018-WEPML001
[n] A. Jeff, E. B. Holzer, T. Lefevre, V. Tzoganis, C. P. Welsch, and H. D. Zhang, “A Quantum Gas Jet for Non-Invasive Beam Profile Measurement”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUCZB3, pp. 284-288.
[n] M. A. Kemp, D. E. Anderson, C. Burkhart, and M. N. Nguyen, “Redesign of the H-Bridge Switch Plate of the SNS High Voltage Converter Modulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP093, pp. 1763-1765.
[n] P. Kowina et al., “Pre-amplifier Impedance Matching for Cryogenic BPMs”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD20, pp. 347-349.
[n] P. Garg, I. Adlakha, K. N. Solanki, S. Balachandran, P. J. Lee, and T. R. Bieler, “Role of Nitrogen on Hydride Nucleation in Pure Niobium by First Principles Calculations”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 741-745. doi:10.18429/JACoW-SRF2017-THPB002
[n] A. Sublet et al., “Preliminary Results of Nb Thin Film Coating for HIE-ISOLDE SRF Cavities Obtained by Magnetron Sputtering”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP076, pp. 620-622.
[n] Y. Takeuchi et al., “HOM Absorber for the ARES Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P034, pp. 2986-2988.
[n] C. Madec et al., “Status of E-XFEL String and Cryomodule Assembly at CEA-Saclay”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB09, pp. 831-833.
[n] G. Ellis and B. G. Smith, “Modal Survey of Medium Energy Superconducting Radio Frequency Cavity for Accelerator Production of Tritium Project”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP027, pp. 258-262.
[n] S. Walston et al., “Performance of a Nanometer Resolution BPM System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH105, pp. 1256-1258.
[n] M. Uesaka, F. Sakamoto, and A. Sakumi, “Pinpoint keV/MeV X-ray Sources for X-ray Drug Delivery System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN035, pp. 2793-2795.
[n] Y. S. Kim et al., “New Design of the KIRAMS-13 Cyclotron for Regional Cyclotron Center”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13008, pp. XX-XX.
[n] T. T. Nakamura et al., “The Construction of the SuperKEKB Magnet Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 897-900. doi:10.18429/JACoW-ICALEPCS2015-WEPGF085
[n] A. Blednykh et al., “Temperature Measurements of the NSLS-II Vacuum Components”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 443-445. doi:10.18429/JACoW-NAPAC2019-TUPLM36
[n] O. Kononenko, Z. Li, R. Calaga, and C. Zanoni, “Multiphysics Analysis of Crab Cavities for High Luminosity LHC Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 17-19. doi:10.18429/JACoW-NAPAC2016-MOB2CO04
[n] B. Lindstrom et al., “Results of UFO Dynamics Studies with Beam in the LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2914-2917. doi:10.18429/JACoW-IPAC2018-THYGBD2
[n] S. Di Carlo et al., “Early Phase 2 Results of LumiBelle2 for the SuperKEKB Electron Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2934-2937. doi:10.18429/JACoW-IPAC2018-THYGBE4
For LaTeX
Use Complete Form
For BibTeX
References
- B. Rusnak and A. Shapiro, “Test Results for a Heat-Treated 4-Cell 805-MHz Superconducting Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPP10, pp. 1636-1638.
- E. Acerbi et al., “Operational Experience with the Superconducting Coils of the Milan K800 Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F3-04, pp. 232-235.
- T. J. Shea, D. W. Feldman, R. B. Fiorito, C. Maxey, T. J. McManamy, and A. G. Shkvarunets, “Status of Beam Imaging Developments for the SNS Target”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOOC04, pp. 38-40.
- T. Furuya et al., “Beam Test of a Superconducting Damped Cavity for KEKB”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P027, pp. 3087-3089.
- J. W. G. Thomason, D. C. Faircloth, R. Sidlow, C. M. Thomas, and M. Whitehead, “The Effect of Extraction Geometry on the Measured ISIS H Minus Ion Source Beam”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT141, pp. 1458-1460.
- P. Martin et al., “Antiproton Acceleration in the Fermilab Main Ring and Tevatron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 47-50.
- H. P. Bluem, A. M. M. Todd, and G. R. Neil, “Superconducting RF Injector for High-Power Free-Electron Lasers (FEL)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPB011, pp. 92-94.
- K. Akai et al., “The ARES Cavity for the KEK B-Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP054L, pp. 2008-2010.
- A. S. Setty, “Beam Dynamics Tools for Linacs Design”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB064, pp. 987-989.
- J. Fullerton, L. K. Jensen, and J. Spanggaard, “Software Renovation of CERN's Experimental Areas”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS034, pp. 409-411.
- S. Suzuki et al., “Latest Improvements of the SPring-8 Linac for High Reliability”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP094, pp. 276-278.
- B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
- H. Ito et al., “Lower Critical Field Measurement of NbN Multilayer Thin Film Superconductor at KEK”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 632-636.
- M. L. Langlois, M. Cornelis, F. P?®rez, and P. Sanchez, “Measurements on the Rf Cavity for the ALBA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP097, pp. 781-783.
- J. Le Duff, C. Thomas, G. Bienvenu, H. Sun, M. Fouaidy, and R. Parodi, “RF Pulsed Tests on 3 GHz Niobium Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP107, pp. 913-915.
- L. Lari, H. Gaillard, and V. Mertens, “Scheduling the Installation of the LHC Injection Lines”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT024, pp. 1879-1881.
- J. P. Holzbauer et al., “Passive Microphonics Mitigation during LCLS-II Cryomodule Testing at Fermilab”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2668-2670.
- A. Jeff, E. B. Holzer, T. Lefevre, V. Tzoganis, C. P. Welsch, and H. D. Zhang, “A Quantum Gas Jet for Non-Invasive Beam Profile Measurement”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUCZB3, pp. 284-288.
- M. A. Kemp, D. E. Anderson, C. Burkhart, and M. N. Nguyen, “Redesign of the H-Bridge Switch Plate of the SNS High Voltage Converter Modulator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP093, pp. 1763-1765.
- P. Kowina et al., “Pre-amplifier Impedance Matching for Cryogenic BPMs”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD20, pp. 347-349.
- P. Garg, I. Adlakha, K. N. Solanki, S. Balachandran, P. J. Lee, and T. R. Bieler, “Role of Nitrogen on Hydride Nucleation in Pure Niobium by First Principles Calculations”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 741-745.
- A. Sublet et al., “Preliminary Results of Nb Thin Film Coating for HIE-ISOLDE SRF Cavities Obtained by Magnetron Sputtering”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP076, pp. 620-622.
- Y. Takeuchi et al., “HOM Absorber for the ARES Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P034, pp. 2986-2988.
- C. Madec et al., “Status of E-XFEL String and Cryomodule Assembly at CEA-Saclay”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB09, pp. 831-833.
- G. Ellis and B. G. Smith, “Modal Survey of Medium Energy Superconducting Radio Frequency Cavity for Accelerator Production of Tritium Project”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP027, pp. 258-262.
- S. Walston et al., “Performance of a Nanometer Resolution BPM System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH105, pp. 1256-1258.
- M. Uesaka, F. Sakamoto, and A. Sakumi, “Pinpoint keV/MeV X-ray Sources for X-ray Drug Delivery System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN035, pp. 2793-2795.
- Y. S. Kim et al., “New Design of the KIRAMS-13 Cyclotron for Regional Cyclotron Center”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP13008, pp. XX-XX.
- T. T. Nakamura et al., “The Construction of the SuperKEKB Magnet Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 897-900.
- A. Blednykh et al., “Temperature Measurements of the NSLS-II Vacuum Components”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 443-445.
- O. Kononenko, Z. Li, R. Calaga, and C. Zanoni, “Multiphysics Analysis of Crab Cavities for High Luminosity LHC Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 17-19.
- B. Lindstrom et al., “Results of UFO Dynamics Studies with Beam in the LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2914-2917.
- S. Di Carlo et al., “Early Phase 2 Results of LumiBelle2 for the SuperKEKB Electron Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2934-2937.
Back to search