Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
[n] M. B. Andorf, P. Piot, V. A. Lebedev, and J. Ruan, “Light Optics for Optical Stochastic Cooling”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3028-3031. doi:10.18429/JACoW-IPAC2016-WEPOY022
[n] D. Bertwistle, E. Matias, and M. McKibben, “Experience with Motion Control Systems at the Canadian Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP052, pp. 501-503.
[n] V. Kamerdzhiev, J. Dietrich, K. Reimers, C. Boehme, and A. Pernizki, “Towards Routine Operation of the Scintillation Profile Monitor at COSY”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD007, pp. 382-384.
[n] C. Sibley and E. Bjorklund, “The SNS Run Permit System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP023, pp. XX-XX.
[n] C. Simon et al., “Beam Position Monitors Using a Re-entrant Cavity”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB15, pp. 93-95.
[n] B. A. Ludewigt, “Clinical Requirements and Accelerator Concepts for BNCT”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B006, pp. 3791-3795.
[n] A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3603-3606. doi:10.18429/JACoW-IPAC2016-THPMW028
[n] J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239.
[n] D. L. Hall, J. J. Kaufman, M. Liepe, R. D. Porter, and J. Sears, “First Results From New Single-Cell Nb3Sn Cavities Coated at Cornell University”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 40-43. doi:10.18429/JACoW-IPAC2017-MOOCA2
[n] A. Ferrero Colomo, L. Ducimeti?â, T. Kramer, and L. Sermeus, “Measurement and Characterization of Cable Losses for High Voltage Coaxial Cables Used in Kicker Systems”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3131-3134. doi:10.18429/JACoW-IPAC2017-WEPIK087
[n] V. V. Vardanyan et al., “Distributed Cooling System for the AREAL Test Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4010-4012. doi:10.18429/JACoW-IPAC2014-THPRI100
[n] T. Kroc and A. Moretti, “Conditioning of High Gradient H- Accelerating Cavities”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO422, pp. 102-104.
[n] R. Berg, L. Dallin, and J. M. Vogt, “Orbit Control for the Canadian Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF009, pp. 2275-2277.
[n] N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
[n] M. Ivanyan and V. M. Tsakanov, “Coupling Impedance of Rough Resistive Pipe”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS045, pp. 700-702.
[n] E. J. Taylor, T. D. Hall, M. E. Inman, S. T. Snyder, and A. M. Rowe, “Electropolishing of Niobium SRF Cavities in Low Viscosity Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP054, pp. 540-543.
[n] U. Ratzinger et al., “A Pulsed Linac Front-end for ADS Applications”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB007, pp. 855-857.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
- M. B. Andorf, P. Piot, V. A. Lebedev, and J. Ruan, “Light Optics for Optical Stochastic Cooling”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3028-3031.
- D. Bertwistle, E. Matias, and M. McKibben, “Experience with Motion Control Systems at the Canadian Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP052, pp. 501-503.
- V. Kamerdzhiev, J. Dietrich, K. Reimers, C. Boehme, and A. Pernizki, “Towards Routine Operation of the Scintillation Profile Monitor at COSY”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD007, pp. 382-384.
- C. Sibley and E. Bjorklund, “The SNS Run Permit System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP023, pp. XX-XX.
- C. Simon et al., “Beam Position Monitors Using a Re-entrant Cavity”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB15, pp. 93-95.
- B. A. Ludewigt, “Clinical Requirements and Accelerator Concepts for BNCT”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9B006, pp. 3791-3795.
- A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3603-3606.
- J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239.
- D. L. Hall, J. J. Kaufman, M. Liepe, R. D. Porter, and J. Sears, “First Results From New Single-Cell Nb3Sn Cavities Coated at Cornell University”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 40-43.
- A. Ferrero Colomo, L. Ducimeti?â, T. Kramer, and L. Sermeus, “Measurement and Characterization of Cable Losses for High Voltage Coaxial Cables Used in Kicker Systems”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3131-3134.
- V. V. Vardanyan et al., “Distributed Cooling System for the AREAL Test Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4010-4012.
- T. Kroc and A. Moretti, “Conditioning of High Gradient H- Accelerating Cavities”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO422, pp. 102-104.
- R. Berg, L. Dallin, and J. M. Vogt, “Orbit Control for the Canadian Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF009, pp. 2275-2277.
- N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
- M. Ivanyan and V. M. Tsakanov, “Coupling Impedance of Rough Resistive Pipe”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS045, pp. 700-702.
- E. J. Taylor, T. D. Hall, M. E. Inman, S. T. Snyder, and A. M. Rowe, “Electropolishing of Niobium SRF Cavities in Low Viscosity Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP054, pp. 540-543.
- U. Ratzinger et al., “A Pulsed Linac Front-end for ADS Applications”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB007, pp. 855-857.
Back to search