Favourites
For Word
[n] M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3042-3045.
[n] K. A. Brown et al., “Coulomb Crystals in Storage Rings for Quantum Information Science”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 296-301. doi:10.18429/JACoW-NAPAC2022-TUYE1
[n] T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2331-2334.
[n] U. Wienands et al., “Status and Early Commissioning Results for the PEP-II High Energy Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B009, pp. 315-317.
[n] M. Di Giacomo, A. Orduz, C. Jamet, J.-F. Leyge, and P. Salou, “Phase setting issues for the SPIRAL2 LINAC”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 383-386. doi:10.18429/JACoW-LINAC2024-TUPB025
[n] C. Andelfinger et al., “The New Garching Fast ERA Experiment”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 276-280.
[n] S. I. Sosa Guitron, S. Biedron, T. B. Bolin, K. A. Brown, and B. Huang, “Electromagnetic Analysis of a Circular Storage Ring for Quantum Computing Using Vsim”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2034-2035. doi:10.18429/JACoW-IPAC2022-WEPOTK005
[n] P. Pok, F. Havart, and T. Ladzinski, “Integration of Personal Protective Equipment Checks in Access Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1613-1616. doi:10.18429/JACoW-ICALEPCS2017-THPHA100
[n] F.-Z. Hsiao et al., “The Liquid Helium Cryogenic System for the Superconducting Cavity in SRRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH162, pp. 1604-1606.
[n] J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2119-2122. doi:10.18429/JACoW-IPAC2024-WEPC65
[n] J. M. Jowett and T. M. Taylor, “Wigglers for Control of Beam Characteristics in LEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2581-2584.
[n] J. Gareyte, L. Magnani, F. Pedersen, F. Sacherer, and K. Schindl, “Beam Dynamics Experiments in the PS Booster”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1855-1859.
[n] G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
[n] M. Y. Yoshida et al., “Design of the COMET Pion Capture Solenoid”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC030, pp. 4116-4118.
[n] F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
[n] M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3283-3285. doi:10.18429/JACoW-IPAC2019-WEPTS069
[n] S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
[n] T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3704-3707.
[n] C. Jamet et al., “SPIRAL2 Diagnostic Qualifications with RFQ beams”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 188-192. doi:10.18429/JACoW-IBIC2019-MOPP036
[n] R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, and L. Root, “Beam Quality Investigations for H- Extraction at TRIUMF”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXA-12, pp. 415-418.
[n] T. Mattison, R. Cassel, A. Donaldson, H. Fischer, and D. Gough, “Pulse Shape Adjustment for the SLC Damping Ring Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3156-3159.
[n] J. Xie, “Linacs for FEL in China”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper FR1-04, pp. 950-953.
[n] M. Martinello et al., “Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 448. doi:10.18429/JACoW-SRF2021-TUPCAV005
[n] R. B. Fiorito et al., “Emittance Measurements of FEL Accelerators Using Optical Transition Radiation Methods”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1204-1207.
[n] E. Hoyer et al., “The U5.0 Undulator for the ALS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2721-2724.
[n] C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
[n] A. F. Tummillo, R. A. Andrews, E. R. Detting, and J. McCarthy, “The Microprocessor-Based Control Facility of the He Refrigerator System used in the 1000 GeV Fermilab Switchyard”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3316-3319.
[n] D. Humphries and R. Schlueter, “Harmonic Correction Rings for the PEP-II I.R. Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P038, pp. 3315-3317.
[n] W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
[n] H. Takaki et al., “Stored Beam Stability during Pulsed Sextupole Injection at the Photon Factory Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP045, pp. 1647-1649.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3042-3045.
- K. A. Brown et al., “Coulomb Crystals in Storage Rings for Quantum Information Science”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 296-301.
- T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2331-2334.
- U. Wienands et al., “Status and Early Commissioning Results for the PEP-II High Energy Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B009, pp. 315-317.
- M. Di Giacomo, A. Orduz, C. Jamet, J.-F. Leyge, and P. Salou, “Phase setting issues for the SPIRAL2 LINAC”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 383-386.
- C. Andelfinger et al., “The New Garching Fast ERA Experiment”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 276-280.
- S. I. Sosa Guitron, S. Biedron, T. B. Bolin, K. A. Brown, and B. Huang, “Electromagnetic Analysis of a Circular Storage Ring for Quantum Computing Using Vsim”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2034-2035.
- P. Pok, F. Havart, and T. Ladzinski, “Integration of Personal Protective Equipment Checks in Access Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1613-1616.
- F.-Z. Hsiao et al., “The Liquid Helium Cryogenic System for the Superconducting Cavity in SRRC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH162, pp. 1604-1606.
- J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC65, pp. 2119-2122.
- J. M. Jowett and T. M. Taylor, “Wigglers for Control of Beam Characteristics in LEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2581-2584.
- J. Gareyte, L. Magnani, F. Pedersen, F. Sacherer, and K. Schindl, “Beam Dynamics Experiments in the PS Booster”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1855-1859.
- G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
- M. Y. Yoshida et al., “Design of the COMET Pion Capture Solenoid”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC030, pp. 4116-4118.
- F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
- M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3283-3285.
- S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
- T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3704-3707.
- C. Jamet et al., “SPIRAL2 Diagnostic Qualifications with RFQ beams”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 188-192.
- R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, and L. Root, “Beam Quality Investigations for H- Extraction at TRIUMF”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXA-12, pp. 415-418.
- T. Mattison, R. Cassel, A. Donaldson, H. Fischer, and D. Gough, “Pulse Shape Adjustment for the SLC Damping Ring Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3156-3159.
- J. Xie, “Linacs for FEL in China”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper FR1-04, pp. 950-953.
- M. Martinello et al., “Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 448.
- R. B. Fiorito et al., “Emittance Measurements of FEL Accelerators Using Optical Transition Radiation Methods”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1204-1207.
- E. Hoyer et al., “The U5.0 Undulator for the ALS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2721-2724.
- C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
- A. F. Tummillo, R. A. Andrews, E. R. Detting, and J. McCarthy, “The Microprocessor-Based Control Facility of the He Refrigerator System used in the 1000 GeV Fermilab Switchyard”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3316-3319.
- D. Humphries and R. Schlueter, “Harmonic Correction Rings for the PEP-II I.R. Quadrupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P038, pp. 3315-3317.
- W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
- H. Takaki et al., “Stored Beam Stability during Pulsed Sextupole Injection at the Photon Factory Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP045, pp. 1647-1649.
Back to search