Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “200 MHz Fast Phase Shifters and Phase Detection for a Ramping Energy”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-8, pp. 364-366.
[n] R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1303-1306.
[n] J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593.
[n] H. Harano, K. Kinoshita, T. Ueda, M. Uesaka, T. Watanabe, and K. Yoshii, “Fundamental Research of Subpicosecond Time Resolved X-Ray Diffractometry Using Electron Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP36C, pp. 2452-2454.
[n] J. D. Sherman et al., “A DC Proton Injector for Use in High-Current CW Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP43C, pp. 1424-1426.
[n] P. Tenenbaum, “The JLC/NLC Baseline Design”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPC009, pp. 681-683.
[n] E. Hoyer et al., “The Beam Line VI REC-Steel Hybrid Wiggler for SSRL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3118-3121.
[n] M. Fakhari et al., “Compact Electron Injectors Using Laser Driven THz Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 506-508. doi:10.18429/JACoW-IPAC2017-MOPIK005
[n] B. Piosczyk, J. Halbritter, P. Kneisel, and O. Stoltz, “Investigations of Additional Losses in Superconducting Niobium Cavities Due to Frozen-In Flux”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 108-113.
[n] M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 449-454.
[n] H. Leboutet, “The Maryland University Sectored Isochronous Cyclotron - MUSIC”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 881-887.
[n] M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Pushing the Limits: RF Field Control at High Loaded Q”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP66, pp. 625-625.
[n] P. Raimondi, P. Tenenbaum, M. Ross, R. Iverson, D. McCormick, and K. Jobe, “Single Pulse Damage in Copper”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA06, pp. 47-49.
[n] J. D. Stepp and J. F. Bridges, “Positron Accumulator Ring (PAR) RF System Design and Test”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1871-1874.
[n] J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
[n] R. F. Koontz, “Multiple Beam Pulse Capability of the SLAC Injector”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 104-110.
[n] J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
[n] J. W. Poukey, C. A. Frost, M. G. Mazarakis, and J. J. Ramirez, “Production of Tightly Focused E-Beams with High-Current Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3059-3062.
[n] A. Seryi, L. Hendrickson, T. O. Raubenheimer, D. Schulte, P. Tenenbaum, and M. Woodley, “Effects of Dynamic Misalignments and Feedback Performance on Luminosity Stability in Linear Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPC004, pp. 662-664.
[n] M. Kando et al., “Performance Study of High Current Photo-Cathode RF-Gun with New Laser System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A07, pp. 1663-1665.
[n] G. Johnson and R. White, “History Data Facility in the SLC Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1540-1543.
[n] H. Wang et al., “Cavity mirror development for optical enhancement cavity of steady-state microbunching light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1254-1256. doi:10.18429/JACoW-IPAC2023-MOPM123
[n] B. Gittelman, “Recent Developments on the Stanford 500 - MeV Electron Storage Rings”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 1033-1042.
[n] P. Niknejadi et al., “Status of the Transverse Diagnostics at FLASHForward”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1630-1633. doi:10.18429/JACoW-IPAC2018-TUPML040
[n] Y. Muroya et al., “Sub-Picosecond Pulse Radiolysis Project at NERL, Univ. of Tokyo”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP153, pp. 2602-2604.
[n] W. Andreazza et al., “Design of New Beam Instrumentation for the ISOLDE Isotope Separator at CERN”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 205-207. doi:10.18429/JACoW-MEDSI2018-WEPH03
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613.
[n] I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4003-4006. doi:10.18429/JACoW-IPAC2015-THPF123
[n] J. Galambos et al., “SNS Global Database Use in Application Programming”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE016, pp. 2363-2365.
[n] H. Saugnac et al., “Cryogenic Installation Status of the ``CRYHOLAB'' Test Facility”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ007, pp. XX-XX.
[n] M. A. Dehn, K. Aulenbacher, F. Fichtner, E. Kirsch, and V. Tioukine, “Longitudinal Beam Halo in the Photoemission from GaAs-Photocathodes in a 100keV DC Gun”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG502, pp. 72-74.
[n] R. G. Heine et al., “Recent Status of the MAMI-C Accelerator and First Experiences with the Energy Upgrade towards 1.6 GeV”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD025, pp. 4328-4330.
[n] A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553.
For LaTeX
Use Complete Form
For BibTeX
References
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “200 MHz Fast Phase Shifters and Phase Detection for a Ramping Energy”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-8, pp. 364-366.
- R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1303-1306.
- J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593.
- H. Harano, K. Kinoshita, T. Ueda, M. Uesaka, T. Watanabe, and K. Yoshii, “Fundamental Research of Subpicosecond Time Resolved X-Ray Diffractometry Using Electron Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP36C, pp. 2452-2454.
- J. D. Sherman et al., “A DC Proton Injector for Use in High-Current CW Linacs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP43C, pp. 1424-1426.
- P. Tenenbaum, “The JLC/NLC Baseline Design”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPC009, pp. 681-683.
- E. Hoyer et al., “The Beam Line VI REC-Steel Hybrid Wiggler for SSRL”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3118-3121.
- M. Fakhari et al., “Compact Electron Injectors Using Laser Driven THz Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 506-508.
- B. Piosczyk, J. Halbritter, P. Kneisel, and O. Stoltz, “Investigations of Additional Losses in Superconducting Niobium Cavities Due to Frozen-In Flux”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 108-113.
- M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 449-454.
- H. Leboutet, “The Maryland University Sectored Isochronous Cyclotron - MUSIC”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 881-887.
- M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Pushing the Limits: RF Field Control at High Loaded Q”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP66, pp. 625-625.
- P. Raimondi, P. Tenenbaum, M. Ross, R. Iverson, D. McCormick, and K. Jobe, “Single Pulse Damage in Copper”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOA06, pp. 47-49.
- J. D. Stepp and J. F. Bridges, “Positron Accumulator Ring (PAR) RF System Design and Test”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1871-1874.
- J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
- R. F. Koontz, “Multiple Beam Pulse Capability of the SLAC Injector”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 104-110.
- J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
- J. W. Poukey, C. A. Frost, M. G. Mazarakis, and J. J. Ramirez, “Production of Tightly Focused E-Beams with High-Current Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3059-3062.
- A. Seryi, L. Hendrickson, T. O. Raubenheimer, D. Schulte, P. Tenenbaum, and M. Woodley, “Effects of Dynamic Misalignments and Feedback Performance on Luminosity Stability in Linear Colliders”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPC004, pp. 662-664.
- M. Kando et al., “Performance Study of High Current Photo-Cathode RF-Gun with New Laser System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A07, pp. 1663-1665.
- G. Johnson and R. White, “History Data Facility in the SLC Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1540-1543.
- H. Wang et al., “Cavity mirror development for optical enhancement cavity of steady-state microbunching light source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM123, pp. 1254-1256.
- B. Gittelman, “Recent Developments on the Stanford 500 - MeV Electron Storage Rings”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 1033-1042.
- P. Niknejadi et al., “Status of the Transverse Diagnostics at FLASHForward”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1630-1633.
- Y. Muroya et al., “Sub-Picosecond Pulse Radiolysis Project at NERL, Univ. of Tokyo”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP153, pp. 2602-2604.
- W. Andreazza et al., “Design of New Beam Instrumentation for the ISOLDE Isotope Separator at CERN”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 205-207.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613.
- I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4003-4006.
- J. Galambos et al., “SNS Global Database Use in Application Programming”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE016, pp. 2363-2365.
- H. Saugnac et al., “Cryogenic Installation Status of the ``CRYHOLAB'' Test Facility”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ007, pp. XX-XX.
- M. A. Dehn, K. Aulenbacher, F. Fichtner, E. Kirsch, and V. Tioukine, “Longitudinal Beam Halo in the Photoemission from GaAs-Photocathodes in a 100keV DC Gun”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG502, pp. 72-74.
- R. G. Heine et al., “Recent Status of the MAMI-C Accelerator and First Experiences with the Energy Upgrade towards 1.6 GeV”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD025, pp. 4328-4330.
- A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553.
Back to search