Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “A Hardware and Software Overview on the New BTF Transverse Profile Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 818-821. doi:10.18429/JACoW-IBIC2016-WEPG73
[n] G. Di Massa and M. R. Masullo, “Beam Impedance Measurement Using a Synthetic Pulse Technique”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1052-1055.
[n] M. S. Rosenthal et al., “Commissioning Results of the Tertiary Beam Lines for the CERN Neutrino Platform Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3738-3741. doi:10.18429/JACoW-IPAC2019-THPGW064
[n] S. H. Kim et al., “SRF R&D for FRIB Linac Energy Upgrade with High-performance Medium-beta Elliptical Cavity CW Cryomodules”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIBA01, unpublished.
[n] C. R. Emigh, E. A. Meyer, and D. W. Mueller, “Test of LASL Ion Source with 750-kV Accelerating Column”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper J-2, pp. 1007-1025.
[n] J. S. Eldred and A. Valishev, “Design Considerations for Proposed Fermilab Integrable RCS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1138-1141. doi:10.18429/JACoW-NAPAC2016-THPOA19
[n] A. Ratti, M. Champion, L. Doolittle, H. Ma, and M. Monroy, “Operational Performance of the SNS LLRF Interim System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG018, pp. 1464-1466.
[n] C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2803-2806. doi:10.18429/JACoW-IPAC2014-THOBA03
[n] H. D. Haseroth, “Pb Injector at CERN”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TU201, pp. 283-287.
[n] W. Liu et al., “Different scenarios for generating coherent THz radiation based on a compact electron accelerator”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG77, unpublished.
[n] P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1070-1072. doi:10.18429/JACoW-ICALEPCS2015-WEPGF155
[n] J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1213-1216.
[n] S. Y. Lee, S. Tepikian, and X. F. Zhao, “A Study of the Coupling Resonances in the AGS Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 770-773.
[n] M. Placidi et al., “Design and First Performance of the LEP Laser Polarimeter”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 791-794.
[n] F. Geslin, P. Blache, M. Chabot, J. Lesrel, Ch. L. Lievin, and S. Sierra, “Development of 704.4 MHz Power Coupler Window for Myrrha Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 776-778. doi:10.18429/JACoW-LINAC2016-THPRC006
[n] C. Lechner et al., “Concept for a Seeded FEL at FLASH2”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 34-37. doi:10.18429/JACoW-FEL2017-MOP003
[n] H. Guerin et al., “Simulation of machine-induced background to ALICE in the 2023 LHC ion run”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS138, unpublished.
[n] P. Lee and L. Smith, “Analysis of Resonant Longitudinal Instability in a Heavy Ion Induction Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1737-1740.
[n] G. Torrisi et al., “Design of a compact Ka-Band Mode Launcher for High-gradient Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1100-1102. doi:10.18429/JACoW-IPAC2021-MOPAB353
[n] H. F. Breede, H.-J. Grabosch, M. Sachwitz, and L. V. Vu, “A Power Switching Ionization Profile Monitor (3D-IPM)”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP015, pp. 47-49.
[n] Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329. doi:10.18429/JACoW-RuPAC2021-TUPSB48
[n] B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 854-857. doi:10.18429/JACoW-LINAC2022-THPORI15
[n] H. Grote and C. Iselin, “Recent Developments in Mad Version 8”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1682-1685.
[n] S. Abeyratne and B. Erdelyi, “The First Particle-Based Proof of Principle Numerical Simulation of Electron Cooling”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1241-1244. doi:10.18429/JACoW-NAPAC2016-THPOA68
[n] K. L. Junck and E. S. McCrory, “Beam Position Correction in the Fermilab Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-76, pp. 881-883.
[n] A. Kosicek, T. Karcnik, V. Poucki, and K. B. Scheidt, “Modified Digital Filtering Makes Possible True & Pure" Turn-by-Turn Measurements"”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF033, pp. 186-189.
[n] A. E. Candel et al., “Parallel 3D Finite Element Particle-in-Cell Simulations with Pic3P”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP069, pp. 4470-4472.
[n] S. Y. Lee and X. F. Zhao, “Microwave Instabilities in Booster and AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1188-1190.
[n] P. W. Allison, E. A. Meyer, D. W. Mueller, and R. R. Stevens, “Status of the LAMPF H Injector”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P01, pp. 303-309.
[n] J. R. McConnell, P. W. Allison, E. A. Meyer, and R. R. Stevens, “Status of the Injector Complex at LAMPF”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F03, pp. 327-332.
[n] R. Veness, W. Andreazza, D. Gudkov, A. Miarnau Marin, and S. Samuelsson, “Metal 3D Additive Machining for in-Vacuum Beam Instrumentation”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 121-124. doi:10.18429/JACoW-MEDSI2018-TUPH36
[n] P. Valente, B. Buonomo, D. G. C. Di Giulio, and L. G. Foggetta, “DANE BTF Improvements of the Transverse Beam Diagnostics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 250-252. doi:10.18429/JACoW-IPAC2017-MOPAB061
[n] D. H. Bilderback, “Energy Recovery Linac Experimental Challenges”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper PLT03, pp. XX-XX.
[n] L. Reginato, C. Peters, D. Vanecek, S. Yu, and F. Deadrick, “Engineering Conceptual Design of the Relativistic Klystron Two-Beam Accelerator Based Power Source for 1-TeV Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC18, pp. 743-745.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “A Hardware and Software Overview on the New BTF Transverse Profile Monitor”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 818-821.
- G. Di Massa and M. R. Masullo, “Beam Impedance Measurement Using a Synthetic Pulse Technique”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1052-1055.
- M. S. Rosenthal et al., “Commissioning Results of the Tertiary Beam Lines for the CERN Neutrino Platform Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3738-3741.
- S. H. Kim et al., “SRF R&D for FRIB Linac Energy Upgrade with High-performance Medium-beta Elliptical Cavity CW Cryomodules”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIBA01, unpublished.
- C. R. Emigh, E. A. Meyer, and D. W. Mueller, “Test of LASL Ion Source with 750-kV Accelerating Column”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper J-2, pp. 1007-1025.
- J. S. Eldred and A. Valishev, “Design Considerations for Proposed Fermilab Integrable RCS”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1138-1141.
- A. Ratti, M. Champion, L. Doolittle, H. Ma, and M. Monroy, “Operational Performance of the SNS LLRF Interim System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG018, pp. 1464-1466.
- C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2803-2806.
- H. D. Haseroth, “Pb Injector at CERN”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TU201, pp. 283-287.
- W. Liu et al., “Different scenarios for generating coherent THz radiation based on a compact electron accelerator”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG77, unpublished.
- P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1070-1072.
- J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1213-1216.
- S. Y. Lee, S. Tepikian, and X. F. Zhao, “A Study of the Coupling Resonances in the AGS Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 770-773.
- M. Placidi et al., “Design and First Performance of the LEP Laser Polarimeter”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 791-794.
- F. Geslin, P. Blache, M. Chabot, J. Lesrel, Ch. L. Lievin, and S. Sierra, “Development of 704.4 MHz Power Coupler Window for Myrrha Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 776-778.
- C. Lechner et al., “Concept for a Seeded FEL at FLASH2”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 34-37.
- H. Guerin et al., “Simulation of machine-induced background to ALICE in the 2023 LHC ion run”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS138, this conference.
- P. Lee and L. Smith, “Analysis of Resonant Longitudinal Instability in a Heavy Ion Induction Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1737-1740.
- G. Torrisi et al., “Design of a compact Ka-Band Mode Launcher for High-gradient Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1100-1102.
- H. F. Breede, H.-J. Grabosch, M. Sachwitz, and L. V. Vu, “A Power Switching Ionization Profile Monitor (3D-IPM)”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP015, pp. 47-49.
- Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329.
- B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 854-857.
- H. Grote and C. Iselin, “Recent Developments in Mad Version 8”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1682-1685.
- S. Abeyratne and B. Erdelyi, “The First Particle-Based Proof of Principle Numerical Simulation of Electron Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1241-1244.
- K. L. Junck and E. S. McCrory, “Beam Position Correction in the Fermilab Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-76, pp. 881-883.
- A. Kosicek, T. Karcnik, V. Poucki, and K. B. Scheidt, “Modified Digital Filtering Makes Possible True & Pure" Turn-by-Turn Measurements"”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF033, pp. 186-189.
- A. E. Candel et al., “Parallel 3D Finite Element Particle-in-Cell Simulations with Pic3P”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP069, pp. 4470-4472.
- S. Y. Lee and X. F. Zhao, “Microwave Instabilities in Booster and AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1188-1190.
- P. W. Allison, E. A. Meyer, D. W. Mueller, and R. R. Stevens, “Status of the LAMPF H Injector”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P01, pp. 303-309.
- J. R. McConnell, P. W. Allison, E. A. Meyer, and R. R. Stevens, “Status of the Injector Complex at LAMPF”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper F03, pp. 327-332.
- R. Veness, W. Andreazza, D. Gudkov, A. Miarnau Marin, and S. Samuelsson, “Metal 3D Additive Machining for in-Vacuum Beam Instrumentation”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 121-124.
- P. Valente, B. Buonomo, D. G. C. Di Giulio, and L. G. Foggetta, “DANE BTF Improvements of the Transverse Beam Diagnostics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 250-252.
- D. H. Bilderback, “Energy Recovery Linac Experimental Challenges”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper PLT03, pp. XX-XX.
- L. Reginato, C. Peters, D. Vanecek, S. Yu, and F. Deadrick, “Engineering Conceptual Design of the Relativistic Klystron Two-Beam Accelerator Based Power Source for 1-TeV Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC18, pp. 743-745.
Back to search