Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Altmark, A. Kanareykin, and I. L. Sheynman, “Transverse Bunch Dynamics in Rectangular Dielectric Loaded Wakefield Accelerator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB018, pp. 207-209.
[n] A. Ballarino, S. A. March, and K. H. Mess, “Commissioning of the LHC Current Leads”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD018, pp. 2446-2448.
[n] L. Giannone et al., “Computational Strategies in Optimizing a Real-Time Grad-Shafranov PDE Solver using High-Level Graphical Programming and COTS Technology”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL024, pp. 180-182.
[n] B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1293-1296.
[n] Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-cell Cavity (2)”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 494-495. doi:10.18429/JACoW-LINAC2018-TUPO069
[n] P. K. Saha et al., “Status of Proof-of-Principle Demonstration of 400 MeV H-Stripping to Proton by Using Only Lasers at J-PARC”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 422-427. doi:10.18429/JACoW-HB2018-THP1WC02
[n] L. R. Carver et al., “First Machine Developments Result with HL-LHC Crab Cavities in the SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 338-341. doi:10.18429/JACoW-IPAC2019-MOPGW094
[n] F. Toral et al., “Design, Manufacturing and Tests of a Micrometer Precision Mover for CTF3 Quadrupoles”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD040, pp. 1517-1519.
[n] A. Harvey and S. A. Walker, “Mineral-Insulated Magnets for High-Radiation Environments”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 611-613.
[n] P. J. Tallerico, “Low Frequency Klystrons for Accelerator Applications”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1692-1695.
[n] M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n] T. Fujisawa et al., “Development of a Beam Profile Monitor using an Oxygen Gas Sheet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A12, pp. 1729-1731.
[n] A. G?Âtz, D. Schmidt, and M. Clausen, “Middleware in Accelerator and Telescope Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE202, pp. XX-XX.
[n] J. Kamenik, “Management System Based on Open Source Tools”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_010.
[n] G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514.
[n] Y. Zou et al., “Status of the ESSnuSB Accumulator Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 666-668. doi:10.18429/JACoW-IPAC2019-MOPRB046
[n] M. Marquarding, “Past, Present and Future of the ASKAP Monitoring and Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1162-1164. doi:10.18429/JACoW-ICALEPCS2015-FRA3O01
[n] N. Barov, X. Chang, R. H. Miller, and D. J. Newsham, “Development of the Dual Slot Resonance Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC044, pp. 3383-3385.
[n] G. Mayer, S. Beck, and R. Pasquinelli, “Control of Stochastic Cooling & RF Systems Using Interactive Graphics”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 738-741.
[n] C. Ankenbrandt, E. Gray, J. Griffin, R. P. Johnson, and R. L. Sumner, “Reappearance of Linac Bunch Structure on Booster Bunches During Capture and Acceleratiion”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1455-1458.
[n] I. S. Lehrman et al., “The Grumman/Brookhaven High-Brightness, High-Duty Factor RF Gun”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU2-02, pp. 280-284.
[n] R. Kowalewicz et al., “Beam Test with the CERN Plasma Lens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1539-1542.
[n] D. A. Dimitrov et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Amplifier for Photocathodes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS020, pp. 3555-3557.
[n] R. Ganter et al., “Status of SwissFEL Undulator Lines”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO22, pp. 263-266.
[n] K. Zagar et al., “ACS - Overview of Technical Features”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP704, pp. XX-XX.
[n] J. Dedic, G. Jansa, M. Plesko, and R. Sabjan, “Uniform Motion Control Solution for Variety of Motion Applications”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP002, pp. 1526-1528.
[n] Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_002.
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994.
[n] A. Miura, K. Okabe, M. Yoshimoto, and I. Yamane, “Multi-Laser-Wire Diagnostic for the Beam Profile Measurement of a Negative Hydrogen Ion Beam in the J-PARC LINAC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 856-859. doi:10.18429/JACoW-IBIC2016-THAL03
[n] U. Bechstedt et al., “Geodetical Concept and Alignment of COSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1622-1625.
[n] U. Epting, “Computing and Network Infrastructure for Controls CNIC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O2_009.
[n] D. Olsen, “Status of the SNS Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM401, pp. XX-XX.
[n] M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-10, pp. 59-61.
[n] A. Harvey, F. P. Blackstein, A. J. Otter, and W. A. Wolfe, “Accelerator Magnet Development at CRNL”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper A-4, pp. 41-51.
[n] H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420.
[n] U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 173-176.
[n] E. McCrory, “Emittance Measurement Techniques Used in the 1 MeV RFQ for the PET Isotope Linac at Fermilab”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP07, pp. 335-337.
[n] M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, G. White, and L. Yasukawa, “COSMIC - The SLAC Control System Migration Challenge”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAI001, pp. XX-XX.
[n] S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
[n] Y. Hashimoto et al., “Development of a Beam Profile Monitor using Nitrogen-Molecular Jet for Intense Beams”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB73, pp. 511-514.
[n] I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4334-4337. doi:10.18429/JACoW-IPAC2017-THPIK104
[n] D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796.
[n] X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n] I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524.
[n] E. Harms, B. Hendricks, and T. L. Williams, “Further Development of Instrumentation for the Tevatron Beam Dump”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2196-2198.
[n] J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n] S. Cousineau, “Simulation Tools for High Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB001, pp. 259-263.
[n] A. Harvey and R. D. Turner, “The LAMPF Switchyard Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 892-894.
[n] R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1733-1736.
[n] S. Bartalucci et al., “LISA: Beam Transport and Dynamics”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1756-1759.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Altmark, A. Kanareykin, and I. L. Sheynman, “Transverse Bunch Dynamics in Rectangular Dielectric Loaded Wakefield Accelerator”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB018, pp. 207-209.
- A. Ballarino, S. A. March, and K. H. Mess, “Commissioning of the LHC Current Leads”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD018, pp. 2446-2448.
- L. Giannone et al., “Computational Strategies in Optimizing a Real-Time Grad-Shafranov PDE Solver using High-Level Graphical Programming and COTS Technology”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL024, pp. 180-182.
- B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1293-1296.
- Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-cell Cavity (2)”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 494-495.
- P. K. Saha et al., “Status of Proof-of-Principle Demonstration of 400 MeV H-Stripping to Proton by Using Only Lasers at J-PARC”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 422-427.
- L. R. Carver et al., “First Machine Developments Result with HL-LHC Crab Cavities in the SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 338-341.
- F. Toral et al., “Design, Manufacturing and Tests of a Micrometer Precision Mover for CTF3 Quadrupoles”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD040, pp. 1517-1519.
- A. Harvey and S. A. Walker, “Mineral-Insulated Magnets for High-Radiation Environments”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 611-613.
- P. J. Tallerico, “Low Frequency Klystrons for Accelerator Applications”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1692-1695.
- M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 80-83.
- T. Fujisawa et al., “Development of a Beam Profile Monitor using an Oxygen Gas Sheet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A12, pp. 1729-1731.
- A. G?Âtz, D. Schmidt, and M. Clausen, “Middleware in Accelerator and Telescope Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE202, pp. XX-XX.
- J. Kamenik, “Management System Based on Open Source Tools”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_010.
- G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514.
- Y. Zou et al., “Status of the ESSnuSB Accumulator Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 666-668.
- M. Marquarding, “Past, Present and Future of the ASKAP Monitoring and Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1162-1164.
- N. Barov, X. Chang, R. H. Miller, and D. J. Newsham, “Development of the Dual Slot Resonance Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC044, pp. 3383-3385.
- G. Mayer, S. Beck, and R. Pasquinelli, “Control of Stochastic Cooling & RF Systems Using Interactive Graphics”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 738-741.
- C. Ankenbrandt, E. Gray, J. Griffin, R. P. Johnson, and R. L. Sumner, “Reappearance of Linac Bunch Structure on Booster Bunches During Capture and Acceleratiion”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1455-1458.
- I. S. Lehrman et al., “The Grumman/Brookhaven High-Brightness, High-Duty Factor RF Gun”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU2-02, pp. 280-284.
- R. Kowalewicz et al., “Beam Test with the CERN Plasma Lens”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1539-1542.
- D. A. Dimitrov et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Amplifier for Photocathodes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS020, pp. 3555-3557.
- R. Ganter et al., “Status of SwissFEL Undulator Lines”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO22, pp. 263-266.
- K. Zagar et al., “ACS - Overview of Technical Features”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP704, pp. XX-XX.
- J. Dedic, G. Jansa, M. Plesko, and R. Sabjan, “Uniform Motion Control Solution for Variety of Motion Applications”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP002, pp. 1526-1528.
- Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_002.
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994.
- A. Miura, K. Okabe, M. Yoshimoto, and I. Yamane, “Multi-Laser-Wire Diagnostic for the Beam Profile Measurement of a Negative Hydrogen Ion Beam in the J-PARC LINAC”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 856-859.
- U. Bechstedt et al., “Geodetical Concept and Alignment of COSY”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1622-1625.
- U. Epting, “Computing and Network Infrastructure for Controls CNIC”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O2_009.
- D. Olsen, “Status of the SNS Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM401, pp. XX-XX.
- M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-10, pp. 59-61.
- A. Harvey, F. P. Blackstein, A. J. Otter, and W. A. Wolfe, “Accelerator Magnet Development at CRNL”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper A-4, pp. 41-51.
- H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420.
- U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 173-176.
- E. McCrory, “Emittance Measurement Techniques Used in the 1 MeV RFQ for the PET Isotope Linac at Fermilab”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP07, pp. 335-337.
- M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, G. White, and L. Yasukawa, “COSMIC - The SLAC Control System Migration Challenge”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAI001, pp. XX-XX.
- S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
- Y. Hashimoto et al., “Development of a Beam Profile Monitor using Nitrogen-Molecular Jet for Intense Beams”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB73, pp. 511-514.
- I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4334-4337.
- D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796.
- X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 141-144.
- I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524.
- E. Harms, B. Hendricks, and T. L. Williams, “Further Development of Instrumentation for the Tevatron Beam Dump”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2196-2198.
- J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1288-1290.
- S. Cousineau, “Simulation Tools for High Intensity Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPB001, pp. 259-263.
- A. Harvey and R. D. Turner, “The LAMPF Switchyard Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 892-894.
- R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1733-1736.
- S. Bartalucci et al., “LISA: Beam Transport and Dynamics”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1756-1759.
Back to search