Favourites
For Word
[n] Y. Iwashita, M. Abe, T. Yako, Y. Fuwa, and N. Terunuma, “Steering Magnets with Permanent Magnets”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 264-266. doi:10.18429/JACoW-LINAC2018-MOPO125
[n] L. Celona et al., “The Proton Source for the European Spallation Source (PS-ESS): Installation and Commissioning at INFN-LNS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 39-42. doi:10.18429/JACoW-ECRIS2016-TUAO01
[n] H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398.
[n] T. Takayanagi, N. Hayashi, M. Kinsho, and Y. Watanabe, “Upgrade Design of the Bump System in the J-PARC 3-GeV RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO028, pp. 3403-3405.
[n] T. Takayanagi et al., “Power Supply of the Pulse Steering Magnet for Changing the Painting Area between the MLF and the MR at J-PARC 3 GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA008, pp. 681-683.
[n] N. ElKamchi, P. Gauron, and H. Monard, “Interlock System for Machine Protection at ThomX Accelerator”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 386-388. doi:10.18429/JACoW-ICALEPCS2015-MOPGF131
[n] Y. Shobuda, N. Hayashi, T. Takayanagi, Y. Irie, and T. Toyama, “A Trial to Reduce the Kicker Impedance of 3-GeV RCS in J-PARC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA010, pp. 1742-1744.
[n] T. Semba et al., “Recent Activities in ILC R&D at Hitachi”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD005, pp. 457-459.
[n] L. Jones, “Status of the ERLP Photoinjector Drive Laser”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 12, pp. 112-114.
[n] J. Kamiya et al., “Commissioning Results of the Kicker Magnet in J-PARC RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP097, pp. 3590-3592.
[n] C. Wang, J. Noonan, and J. Lewellen, “Dual-Axis Energy Recovery Linac”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 18, pp. 122-125.
[n] T. Takayanagi et al., “New Injection Bump Power Supply of the J-PARC RCS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2908-2910. doi:10.18429/JACoW-IPAC2015-WEPMA058
[n] N. Nakamura, “Study of Resistive-Wall Beam Breakup”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 16, pp. 45-49.
[n] A. R. Gamelin, C. Bruni, V. Chaumat, D. Le Guidec, P. Lepercq, and R. Marie, “Impedance Simulations and Measurements for ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 586-588. doi:10.18429/JACoW-IPAC2016-MOPOR002
[n] K. E. Robinson, D. A. G. Deacon, J. M. J. Madey, and M. F. Velghe, “Anomalous Laser Induced Bunch Lengthening on the ACO Storage Ring Free Electron Laser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3088-3091.
[n] G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n] N. ElKamchi and V. Chaumat, “An External Synchronization of PHIL to a High Power Femtosecond Laser”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4228-4230. doi:10.18429/JACoW-IPAC2016-THPOY054
[n] T. Hamelin, M. Chabot, J.-L. Coacolo, J. Lesrel, and G. Martinet, “MUSICC3D: a Code for Modeling the Multipacting”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP092, pp. 683-685.
[n] S. Sakanaka, “Investigation of Bunch-Gap Effects for Curing Ion Trapping in Energy Recovery Linacs”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 15, pp. 41-44.
[n] I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 833-836. doi:10.18429/JACoW-IPAC2016-MOPOW052
[n] N. ElKamchi, V. Chaumat, and V. Soskov, “A Slow RF-Laser Feedback for PHIL Photoinjector”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 784-786. doi:10.18429/JACoW-IPAC2015-MOPHA006
[n] P. Bosland et al., “Status of the Cryomodules for the SPIRAL 2 Superconducting LINAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAKI04, pp. 2578-2580.
[n] L. Neri et al., “Beam Commissioning of the High Intensity Proton Source Developed at INFN-LNS for the European Spallation Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2530-2532. doi:10.18429/JACoW-IPAC2017-WEOBB2
[n] L. Celona et al., “Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2628-2631. doi:10.18429/JACoW-IPAC2016-WEPMY035
[n] H. Churn, L. Jones, and T. Noakes, “Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1404-1407. doi:10.18429/JACoW-IPAC2023-TUPA030
[n] G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 111-113. doi:10.18429/JACoW-ECRIS2016-WEPP18
[n] J. Hebling, G. Alm?ísi, J. A. F??l?Âp, M. I. Mechler, Z. Tibai, and Gy. T??th, “Simple Setups for Carrier-envelope-phase Stable Single-cycle Attosecond Pulse Generation”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO30, pp. 63-67.
[n] C. Bruni et al., “First Electron Beam of the ThomX Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1632-1635. doi:10.18429/JACoW-IPAC2022-WEOYSP2
[n] N. Nishimori, R. Hajima, H. Iijima, R. Nagai, and T. Nishitani, “Development of an Electron Gun for the ERL Light Source in Japan”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 10, pp. 11-14.
[n] C. B. Schroeder, E. Esarey, C. G. R. Geddes, W. Leemans, and C. T??th, “Laser-Plasma-Accelerator-Based Colliders”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP078, pp. 2979-2981.
[n] J. P. Berthet, F. Glotin, J.-M. Ortega, and W. Salah, “Beam Adaptation at the Infrared FEL, CLIO”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH006, pp. 56-58.
[n] D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
[n] L. Celona et al., “Ion Source and Low Energy Beam Transport Line Final Commissioning Step and Transfer from INFN to ESS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1712-1714. doi:10.18429/JACoW-IPAC2018-TUPML073
[n] M. El Khaldi et al., “Commissioning of the RF system for the ThomX storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1137-1140. doi:10.18429/JACoW-IPAC2023-MOPM067
[n] Z. Tibai, G. Alm?ísi, Zs. Csiha-Nagy, J. A. F??l?Âp, J. Hebling, and Gy. T??th, “Carrier-Envelope-Phase Stable Linearly and Circularly Polarized Attosecond Pulse Sources”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 205-208. doi:10.18429/JACoW-FEL2015-MOP071
[n] D. A. G. Deacon et al., “Gain Measurement on the ACO Storage Ring Laser”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3142-3145.
[n] G. Torrisi et al., “Experimental Performance of the Chopper for the ESS Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1709-1711. doi:10.18429/JACoW-IPAC2018-TUPML071
[n] W. P. Leemans et al., “Radio-Isotope Production Using Laser Wakefield Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC011, pp. 129-131.
[n] A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL011, unpublished.
[n] M. Apollonio, L. Alianelli, F. Bakkali Taheri, R. Bartolini, A. J. Dent, and J. Li, “Evaluating the Impact of Diamond-II Possible Lattices on Beamlines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4033-4036. doi:10.18429/JACoW-IPAC2018-THPMF005
[n] T. Noakes, G. Bell, C. Benjamin, H. Churn, and L. Jones, “An upgraded multiprobe surface analysis tool for photocathode research and development”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1205-1207. doi:10.18429/JACoW-IPAC2025-TUPM020
[n] T. Noakes et al., “An update of progress on the design of the diffraction line for the relativistic ultrafast electron diffraction and imaging facility at Daresbury Laboratory”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1208-1211. doi:10.18429/JACoW-IPAC2025-TUPM021
[n] A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL186, unpublished.
[n] A. Leiva Genre et al., “High-Frequency THz Generation and Compact High-Gradient THz-Driven Accelerator with Tapered Parallel-Plate Waveguide.”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3011, unpublished.
[n] Sz. Turn?ír et al., “Sub-MeV Ion Generation by Standing Wave Excitation of Ionized Gases”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2951-2953. doi:10.18429/JACoW-IPAC2021-WEPAB143
[n] C. Benjamin, H. Churn, L. Jones, R. Valizadeh, and T. Noakes, “Rubidium telluride photocathodes for high quantum efficiency and low mean transverse energy accelerator applications”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2137-2139. doi:10.18429/JACoW-IPAC2024-WEPC71
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Iwashita, M. Abe, T. Yako, Y. Fuwa, and N. Terunuma, “Steering Magnets with Permanent Magnets”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 264-266.
- L. Celona et al., “The Proton Source for the European Spallation Source (PS-ESS): Installation and Commissioning at INFN-LNS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 39-42.
- H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398.
- T. Takayanagi, N. Hayashi, M. Kinsho, and Y. Watanabe, “Upgrade Design of the Bump System in the J-PARC 3-GeV RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO028, pp. 3403-3405.
- T. Takayanagi et al., “Power Supply of the Pulse Steering Magnet for Changing the Painting Area between the MLF and the MR at J-PARC 3 GeV RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA008, pp. 681-683.
- N. ElKamchi, P. Gauron, and H. Monard, “Interlock System for Machine Protection at ThomX Accelerator”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 386-388.
- Y. Shobuda, N. Hayashi, T. Takayanagi, Y. Irie, and T. Toyama, “A Trial to Reduce the Kicker Impedance of 3-GeV RCS in J-PARC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA010, pp. 1742-1744.
- T. Semba et al., “Recent Activities in ILC R&D at Hitachi”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD005, pp. 457-459.
- L. Jones, “Status of the ERLP Photoinjector Drive Laser”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 12, pp. 112-114.
- J. Kamiya et al., “Commissioning Results of the Kicker Magnet in J-PARC RCS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP097, pp. 3590-3592.
- C. Wang, J. Noonan, and J. Lewellen, “Dual-Axis Energy Recovery Linac”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 18, pp. 122-125.
- T. Takayanagi et al., “New Injection Bump Power Supply of the J-PARC RCS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2908-2910.
- N. Nakamura, “Study of Resistive-Wall Beam Breakup”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 16, pp. 45-49.
- A. R. Gamelin, C. Bruni, V. Chaumat, D. Le Guidec, P. Lepercq, and R. Marie, “Impedance Simulations and Measurements for ThomX Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 586-588.
- K. E. Robinson, D. A. G. Deacon, J. M. J. Madey, and M. F. Velghe, “Anomalous Laser Induced Bunch Lengthening on the ACO Storage Ring Free Electron Laser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3088-3091.
- G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2512-2514.
- N. ElKamchi and V. Chaumat, “An External Synchronization of PHIL to a High Power Femtosecond Laser”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4228-4230.
- T. Hamelin, M. Chabot, J.-L. Coacolo, J. Lesrel, and G. Martinet, “MUSICC3D: a Code for Modeling the Multipacting”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP092, pp. 683-685.
- S. Sakanaka, “Investigation of Bunch-Gap Effects for Curing Ion Trapping in Energy Recovery Linacs”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 15, pp. 41-44.
- I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 833-836.
- N. ElKamchi, V. Chaumat, and V. Soskov, “A Slow RF-Laser Feedback for PHIL Photoinjector”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 784-786.
- P. Bosland et al., “Status of the Cryomodules for the SPIRAL 2 Superconducting LINAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAKI04, pp. 2578-2580.
- L. Neri et al., “Beam Commissioning of the High Intensity Proton Source Developed at INFN-LNS for the European Spallation Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2530-2532.
- L. Celona et al., “Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2628-2631.
- H. Churn, L. Jones, and T. Noakes, “Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA030, pp. 1404-1407.
- G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 111-113.
- J. Hebling, G. Alm?ísi, J. A. F??l?Âp, M. I. Mechler, Z. Tibai, and Gy. T??th, “Simple Setups for Carrier-envelope-phase Stable Single-cycle Attosecond Pulse Generation”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO30, pp. 63-67.
- C. Bruni et al., “First Electron Beam of the ThomX Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1632-1635.
- N. Nishimori, R. Hajima, H. Iijima, R. Nagai, and T. Nishitani, “Development of an Electron Gun for the ERL Light Source in Japan”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 10, pp. 11-14.
- C. B. Schroeder, E. Esarey, C. G. R. Geddes, W. Leemans, and C. T??th, “Laser-Plasma-Accelerator-Based Colliders”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP078, pp. 2979-2981.
- J. P. Berthet, F. Glotin, J.-M. Ortega, and W. Salah, “Beam Adaptation at the Infrared FEL, CLIO”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH006, pp. 56-58.
- D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
- L. Celona et al., “Ion Source and Low Energy Beam Transport Line Final Commissioning Step and Transfer from INFN to ESS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1712-1714.
- M. El Khaldi et al., “Commissioning of the RF system for the ThomX storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM067, pp. 1137-1140.
- Z. Tibai, G. Alm?ísi, Zs. Csiha-Nagy, J. A. F??l?Âp, J. Hebling, and Gy. T??th, “Carrier-Envelope-Phase Stable Linearly and Circularly Polarized Attosecond Pulse Sources”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 205-208.
- D. A. G. Deacon et al., “Gain Measurement on the ACO Storage Ring Laser”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3142-3145.
- G. Torrisi et al., “Experimental Performance of the Chopper for the ESS Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1709-1711.
- W. P. Leemans et al., “Radio-Isotope Production Using Laser Wakefield Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC011, pp. 129-131.
- A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL011, unpublished.
- M. Apollonio, L. Alianelli, F. Bakkali Taheri, R. Bartolini, A. J. Dent, and J. Li, “Evaluating the Impact of Diamond-II Possible Lattices on Beamlines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4033-4036.
- T. Noakes, G. Bell, C. Benjamin, H. Churn, and L. Jones, “An upgraded multiprobe surface analysis tool for photocathode research and development”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM020, pp. 1205-1207.
- T. Noakes et al., “An update of progress on the design of the diffraction line for the relativistic ultrafast electron diffraction and imaging facility at Daresbury Laboratory”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM021, pp. 1208-1211.
- A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL186, unpublished.
- A. Leiva Genre et al., “High-Frequency THz Generation and Compact High-Gradient THz-Driven Accelerator with Tapered Parallel-Plate Waveguide.”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3011, this conference.
- Sz. Turn?ír et al., “Sub-MeV Ion Generation by Standing Wave Excitation of Ionized Gases”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2951-2953.
- C. Benjamin, H. Churn, L. Jones, R. Valizadeh, and T. Noakes, “Rubidium telluride photocathodes for high quantum efficiency and low mean transverse energy accelerator applications”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC71, pp. 2137-2139.
Back to search