JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX. 
[n]	H. O. C. Duarte, P. P. S. Freitas, A. R. D. Rodrigues, R. M. Seraphim, and T. M. da Rocha, “Design Review of Bellows RF-Shielding Types and New Concepts for Sirius”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 53-56. doi:10.18429/JACoW-IPAC2019-MOPGW001
[n]	H. Frese and G. Hochweller, “The Serial Data Acquisition System at PETRA”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3385-3387. 
[n]	J. P. Edelen et al., “A Flexible EPICS Framework for Sample Alignment at Neutron Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 836-840. doi:10.18429/JACoW-ICALEPCS2023-TUPDP113
[n]	R. Martini, M. Br?ñger, J. L. Salmon, and A. Suwalska, “Tools and Procedures for High Quality Technical Infrastructure Monitoring Reference Data at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1036-1039. doi:10.18429/JACoW-ICALEPCS2015-WEPGF141
[n]	N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 212-215. doi:10.18429/JACoW-IPAC2018-MOPMF048
[n]	L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 652-655. doi:10.18429/JACoW-ICALEPCS2015-WED3O04
[n]	C.-M. Cheng et al., “The Issue with XBPM2 in the TPS Front End”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM073, unpublished. 
[n]	L. H. Waites, J. M. Conrad, J. Smolsky, and D. Winklehner, “Matching of an RFQ and Multicusp Ion Source with Compact LEBT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 546-549. doi:10.18429/JACoW-IPAC2021-MOPAB159
[n]	I. V. Pogorelov et al., “Machine Learning Based Noise Reduction of Neutron Camera Images at ORNL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 841-845. doi:10.18429/JACoW-ICALEPCS2023-TUPDP114
[n]	J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481. 
[n]	M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, B. Ribeiro, and U. Yilmaz, “CI-CD Practices at SKA”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 322-329. doi:10.18429/JACoW-ICALEPCS2021-TUBL04
[n]	A. Regan, S. Kwon, M. Prokop, T. Rohlev, D. Thomson, and H. Ma, “The SNS Linac RF Control System”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH104, pp. 574-576. 
[n]	V. G. Vaccaro et al., “A New Tuning Module for Resonant Coupling Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT005, pp. 973-975. 
[n]	L. G. Ratner, F. Hornstra, S. Marcowitz, N. Reay, T. Romanowski, and R. Sherr, “Simultaneous Multiple Targeting Techniques”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 170-172. 
[n]	Y. Z. Chen et al., “Beam Diagnostic at SDUV-FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA3, pp. 711-713. 
[n]	L. Sanfelici et al., “Carbon-Steel/poliethylene Radiation Enclosures for the Sirius Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 223-225. doi:10.18429/JACoW-MEDSI2016-TUPE26
[n]	T. Gutberlet, “Neutrons for Today and Tomorrow - the HBS Project for Compact Accelerator Based Neutron Sources”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper THXC04, unpublished. 
[n]	M. Bai, R. Calaga, F. Pilat, T. Satogata, F. Schmidt, and R. Tomas, “Measurement of Linear Coupling Resonance in RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB073, pp. 2207-2209. 
[n]	G. Bezzon et al., “Construction and Commissioning of the RFQ for the CERN Lead-Ion Facility”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-12, pp. 722-724. 
[n]	J. Q. Li, “Production of intense carbon beams with permanent magnet ECR ion sources”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO24, unpublished. 
[n]	B. Bogdanovitch, V. Senioukov, A. Koroliov, and K. Simonov, “Application of Low Energy Electron Beams for Technology and Medicine”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP142, pp. 2570-2572. 
[n]	D. Guilhem, J.-L. Lemaire, and S. J. Pichon, “Beam Dynamics Simulations for a 15 MeV Superconducting Electron Linac Coupled to a DC Photo-Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP069, pp. 236-238. 
[n]	K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 517-520. doi:10.18429/JACoW-ICALEPCS2015-TUA3O04
[n]	S.-W. Jang et al., “Beam diagnostics status for the Korea 4GSR project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2389-2392. doi:10.18429/JACoW-IPAC2024-WEPG70
[n]	Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Heavy Ion Induced Desorption Measurements on Cryogenic Targets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 867-869. doi:10.18429/JACoW-IPAC2014-MOPRI105
[n]	E. Merle et al., “Progress with the 2-3 kA AIRIX Electron Beam”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE075, pp. 2649-2651. 
[n]	I. Colizzi et al., “Upgrade of a Clinical Facility to Achieve a High Transmission and Gantry Angle-Independent Flash Tune”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBO05, pp. 191-195. doi:10.18429/JACoW-CYCLOTRONS2022-WEBO05
[n]	D. L. Turner, R. Bachimanchi, A. Carpenter, J. Latshaw, C. Tennant, and L. S. Vidyaratne, “SRF Cavity Instability Detection with Machine Learning at CEBAF”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 669-671. doi:10.18429/JACoW-NAPAC2022-WEPA23
[n]	N. Pichoff et al., “Contributors to AIRIX Focal Spot Size”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH107, pp. 2164-2166. 
[n]	V. Variale, M. Cavenago, and V. Valentino, “High beam energy recovery simulations for space charged based collector in Neutral beam injection application”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 973-975. doi:10.18429/JACoW-IPAC2023-MOPL185
[n]	A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747. 
[n]	A. Halavanau et al., “Development of X-ray laser oscillator”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG45, unpublished. 
[n]	K. Bongardt, H. Deitinghoff, M. Pabst, and G. Parisi, “Error Effects and Parameter Analysis for a HIDIF DTL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP45G, pp. 1121-1123. 
[n]	B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB094, unpublished. 
[n]	D. Manglunki, “LEIR Operations for the LHC and Future Plans”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOPM2HA01, pp. 31-35. 
[n]	C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651. 
[n]	A. Bernhard, A. Ahl, S. Fatehi, B. Haerer, and J. Schaefer, “Compact quadrupole-sextupole magnet units for the FLUTE-cSTART injection line”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB027, unpublished. 
[n]	M. Canzari et al., “Improving Performance of Taranta: Analysis of Memory Requests and Implementation of the Solution”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 617-621. doi:10.18429/JACoW-ICALEPCS2023-TUPDP044
[n]	P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442. 
[n]	T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18. 
[n]	J. Abraham, “Transient Wave Propagation in Linear Accelerators”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-08, pp. 337-343. 
[n]	H. Okuno et al., “New Developments in Low-Z Gas Stripper Sstem at RIKEN Radioactive Isotope Beam Factory (RIBF)”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THB01, pp. 199-205. 
[n]	E. Merle et al., “Installation of the AIRIX Induction Accelerator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4002, pp. 391-393. 
[n]	L. W. Lai, Z. C. Chen, Y. B. Leng, and Y. B. Yan, “An Intelligent Trigger Abnormal Beam Operation Monitoring Processor at the SSRF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 978-980. doi:10.18429/JACoW-IPAC2015-MOPTY020
[n]	H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019. 
[n]	A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678. 
[n]	W.-H. Hwang, S. H. Kim, H. S. Lee, S. H. Nam, and Y. J. Park, “Development of a New Waveguide Valve Using RF Choke Flange for PLS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH309, pp. 1204-1206. 
[n]	D. Marcato et al., “Pysmlib: A Python Finite State Machine Library for EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 330-336. doi:10.18429/JACoW-ICALEPCS2021-TUBL05
[n]	V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215. 
[n]	O. Pierret, “AIRIX Diagnostic Devices for Focal Spot Size and Dose Measurements”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP072, pp. 560-560. 
[n]	D. Li, L. Cao, T. Hu, J. Huang, B. Qin, and J. Yang, “Design and Test of 10 kW RF Amplifier Based on Direct Digital Synthesizer”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP030, pp. 885-887. 
[n]	E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568. 
[n]	A. G. Ruggiero, “Upgrade of BNL Accelerator Facility”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOBP03, pp. 29-33. 
[n]	J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198. 
[n]	J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625. 
[n]	M. Schwarz, S. Glukhov, A.-S. Mueller, and J. Schaefer, “Impact of the cSTART impedance on beam dynamics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM080, unpublished. 
[n]	D. Einfeld, F. Anton, J. Hormes, and D. Husmann, “The Low Emittance 2.5 GeV Synchrotron Light Source LISA”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1693-1696. 
[n]	C. H. Patard et al., “SPIRAL2 Machine Protection System Status Report”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1652. doi:10.18429/JACoW-ICALEPCS2019-THCPR08
[n]	D. Schulte et al., “CLIC Energy Scans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397. 
[n]	J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 274-277. doi:10.18429/JACoW-Cyclotrons2016-THA02
[n]	S. Shin, J. Ko, J. H. Kim, and G. Ha, “Fabrication of THz corrugated structure using X-ray based lithography”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR12, unpublished. 
[n]	Y. Zhang, H. B. Chen, Q. Gao, and J. Shi, “THEORY RESEARCH ON APPLICATION OF CT TECHNOLOGY TO SHIELDED NUCLEAR MATERIAL DISCRIMINATION”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA019, pp. 3669-3671. 
[n]	D. Husmann, “Review of CW Electron Machines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 62-67. 
[n]	J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96. 
[n]	A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA081, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search