Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 196-201. doi:10.18429/JACoW-IBIC2022-TU2T1
[n] S.-H. Kim, M. Doleans, J. Galambos, M. P. Howell, and J. D. Mammosser, “Superconducting Linac Upgrade Plan for the Second Target Station Project at SNS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB069, pp. 268-271.
[n] R. Kuroda et al., “Development of Photocathode RF Gun and Laser System for Multi-collision Laser Compton Scattering”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN051, pp. 1037-1039.
[n] V. P. Romas, V. V. Zakutin, A. N. Dovbnya, N. G. Reshethyak, and M. A. Krasnogolovets, “PULSE MODULATORS FOR FEEDING MAGNETRON GUNS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP010, pp. XX-XX.
[n] E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3830-3833. doi:10.18429/JACoW-IPAC2021-THPAB040
[n] A. Fukasawa et al., “Commissioning a 1.5-m linac and its application in UCLA Mithra Laboratory”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS106, unpublished.
[n] Z. Zhu, C. Feng, M. Cai, and N. Huang, “Intelligent online optimization in X-ray free-electron lasers”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOOD2, unpublished.
[n] N. Jobert, E. Fonda, T. Moreno, and M. Ribbens, “Optomechanical Optimization for a Sagittaly Bent Double Crystal Monochromator, Using Finite Elements and Ray Tracing”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 231-234. doi:10.18429/JACoW-MEDSI2018-WEPH14
[n] C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 693-696. doi:10.18429/JACoW-ICALEPCS2015-WEPGF002
[n] S. Heidrich, K. Aulenbacher, M. W. Bruker, M. Dehn, and P. Heil, “High-Current Emittance Measurements at MAMI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4121-4123. doi:10.18429/JACoW-IPAC2019-THPTS009
[n] J. C. Dooling, L. Donley, G. E. McMichael, F. R. Brumwell, and V. F. Stipp, “Beam Analysis Using the IPNS Linac ESEM”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP61, pp. 405-407.
[n] A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453.
[n] J. Dinkel and R. Reilly, “An Upgraded Proton Injection Kicker Magnet for the Fermilab MIR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA05, pp. 1236-1238.
[n] J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2119-2122. doi:10.18429/JACoW-IPAC2024-WEPC65
[n] S. Schreiber, C. Gruen, K. Klose, J. Roensch, and B. Steffen, “Simultaneous Operation of Three Laser Systems at the FLASH Photoinjector”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 459-463. doi:10.18429/JACoW-FEL2015-TUP041
[n] I. D. Valova, “Cubes in OLAP Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP065, pp. 3354-3354.
[n] T. W. Eagar, “Resistive Measurements on an Improved Nb-A1-Ge Superconducting Ribbon”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 742-744.
[n] L. Zhang, “Preliminary Absorber Design for the Ultimate Storage Ring Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO028, pp. 2592-2594.
[n] A. Jankowiak et al., “The First Two Years of Operation of the 1.5 GeV CW Electron Accelerator MAMI C”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP111, pp. 2772-2774.
[n] A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 600-602. doi:10.18429/JACoW-RUPAC2016-THPSC027
[n] V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402.
[n] N. I. Aizatsky, A. N. Dovbnya, V. V. Zakutin, N. G. Reshetnyak, N. A. Dovbnya, and I. A. Chertishchev, “CONTROLLING THE BEAM OF THE MAGNETRON GUN WITH A SECONDARY-EMISSION CATHODE BY MEANS OF A MAGNETIC FIELD OF THE SOLENOID AND PERMANENT RING-SHAPED MAGNETS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH05, pp. XX-XX.
[n] N. Yu. Kazarinov et al., “Design and Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1852-1854. doi:10.18429/JACoW-IPAC2021-TUPAB191
[n] Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3816-3818. doi:10.18429/JACoW-IPAC2024-THPS36
[n] V. N. Boriskin, A. N. Dovbnya, and A. N. Savchenko, “The Computer Diagnostics of Linac Unit Failures”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP056L, pp. 1789-1790.
[n] C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615.
[n] Y. V. Krylov, E. V. Kaportsev, K. Moseev, N. I. Moseiko, and A. G. Valentinov, “The Automation of Energy Ramping for the Main Storage Ring of KSRS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 597-599. doi:10.18429/JACoW-RUPAC2016-THPSC026
[n] A. Pathak, J.-F. Ostiguy, and O. Napoly, “Space charge dominated momentum spread and compensation strategies in the post-linac section of Proton Improvement Plan-II at Fermilab”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3023-3026. doi:10.18429/JACoW-IPAC2024-THPC22
[n] R. A. Kostin et al., “Balloon Cavity Design With Integrated Ports for Electropolishing”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPCAV003, pp..
[n] A. J. Gee and B. Erdelyi, “Study and Comparison of the Method of Moments and the Single Level Fast Multipole Method for 2D Space Charge Tracking”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA15, pp. 207-209.
[n] B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2355-2358.
[n] A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156.
[n] Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX.
[n] A. S. Smygacheva, Ye. Fomin, V. Korchuganov, V. A. Ushakov, and A. G. Valentinov, “2.5 GeV Booster Synchrotron for a New Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 293-296. doi:10.18429/JACoW-RuPAC2021-TUPSB33
[n] T. Kikuchi, T. Katayama, and S. Kawata, “Influences of Space Charge Effect during Ion Accumulation Using Moving Barrier Bucket Cooperated with Beam Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP19, pp. 206-209.
[n] F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941.
[n] H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 54-56. doi:10.18429/JACoW-MEDSI2016-MOPE23
[n] J. Walton, R. Dixon, H. Edwards, and J. McCarthy, “A Superconducting Dipole for the Fermilab Switchyard”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4056-4058.
[n] R. A. Kostin and C. Jing, “Conduction Cooled SRF Photogun for Electron Microscopy”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV001, pp..
[n] J. D. Sethian, R. A. Mahaffey, R. A. Meger, and D. N. Spector, “Collective Ion Acceleration Produced by Injecting a Rotating Relavistic Electron Beam into Neutral Hydrogen”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4193-4196.
[n] J. Carwardine, “Physics Requirements for Linac Stabilizations and Technical Solutions”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOB03, pp. 433-437.
[n] R. Giacone et al., “Generation of Single Pulse Particle Beams in a Plasma Channel by Laser Injection in Laser Wakefield Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG039, pp. 1885-1887.
[n] M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84.
[n] A. S. Zabanov et al., “Simulation of the Electrostatic Deflector of DC140 Cyclotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 202-204. doi:10.18429/JACoW-RuPAC2021-MOPSA48
[n] N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n] E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
[n] Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX.
[n] S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898.
[n] S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623.
[n] D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX.
[n] T.-C. Fan, C.-S. Hwang, F.-Y. Lin, and I. C. Hsu, “Pulsed Wire Magnetic Field Measurements on Undulator U10p”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH302, pp. 2775-2777.
[n] A. Cabrespine and C. Goldstein, “The Orsay Heavy Ion Accelerator (ALICE)”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper I-3, pp. 973-980.
[n] D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 196-201.
- S.-H. Kim, M. Doleans, J. Galambos, M. P. Howell, and J. D. Mammosser, “Superconducting Linac Upgrade Plan for the Second Target Station Project at SNS”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB069, pp. 268-271.
- R. Kuroda et al., “Development of Photocathode RF Gun and Laser System for Multi-collision Laser Compton Scattering”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN051, pp. 1037-1039.
- V. P. Romas, V. V. Zakutin, A. N. Dovbnya, N. G. Reshethyak, and M. A. Krasnogolovets, “PULSE MODULATORS FOR FEEDING MAGNETRON GUNS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP010, pp. XX-XX.
- E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3830-3833.
- A. Fukasawa et al., “Commissioning a 1.5-m linac and its application in UCLA Mithra Laboratory”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS106, unpublished.
- Z. Zhu, C. Feng, M. Cai, and N. Huang, “Intelligent online optimization in X-ray free-electron lasers”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOOD2, unpublished.
- N. Jobert, E. Fonda, T. Moreno, and M. Ribbens, “Optomechanical Optimization for a Sagittaly Bent Double Crystal Monochromator, Using Finite Elements and Ray Tracing”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 231-234.
- C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 693-696.
- S. Heidrich, K. Aulenbacher, M. W. Bruker, M. Dehn, and P. Heil, “High-Current Emittance Measurements at MAMI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4121-4123.
- J. C. Dooling, L. Donley, G. E. McMichael, F. R. Brumwell, and V. F. Stipp, “Beam Analysis Using the IPNS Linac ESEM”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP61, pp. 405-407.
- A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453.
- J. Dinkel and R. Reilly, “An Upgraded Proton Injection Kicker Magnet for the Fermilab MIR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA05, pp. 1236-1238.
- J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC65, pp. 2119-2122.
- S. Schreiber, C. Gruen, K. Klose, J. Roensch, and B. Steffen, “Simultaneous Operation of Three Laser Systems at the FLASH Photoinjector”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 459-463.
- I. D. Valova, “Cubes in OLAP Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP065, pp. 3354-3354.
- T. W. Eagar, “Resistive Measurements on an Improved Nb-A1-Ge Superconducting Ribbon”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 742-744.
- L. Zhang, “Preliminary Absorber Design for the Ultimate Storage Ring Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO028, pp. 2592-2594.
- A. Jankowiak et al., “The First Two Years of Operation of the 1.5 GeV CW Electron Accelerator MAMI C”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP111, pp. 2772-2774.
- A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 600-602.
- V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402.
- N. I. Aizatsky, A. N. Dovbnya, V. V. Zakutin, N. G. Reshetnyak, N. A. Dovbnya, and I. A. Chertishchev, “CONTROLLING THE BEAM OF THE MAGNETRON GUN WITH A SECONDARY-EMISSION CATHODE BY MEANS OF A MAGNETIC FIELD OF THE SOLENOID AND PERMANENT RING-SHAPED MAGNETS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH05, pp. XX-XX.
- N. Yu. Kazarinov et al., “Design and Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1852-1854.
- Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS36, pp. 3816-3818.
- V. N. Boriskin, A. N. Dovbnya, and A. N. Savchenko, “The Computer Diagnostics of Linac Unit Failures”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP056L, pp. 1789-1790.
- C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615.
- Y. V. Krylov, E. V. Kaportsev, K. Moseev, N. I. Moseiko, and A. G. Valentinov, “The Automation of Energy Ramping for the Main Storage Ring of KSRS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 597-599.
- A. Pathak, J.-F. Ostiguy, and O. Napoly, “Space charge dominated momentum spread and compensation strategies in the post-linac section of Proton Improvement Plan-II at Fermilab”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC22, pp. 3023-3026.
- R. A. Kostin et al., “Balloon Cavity Design With Integrated Ports for Electropolishing”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPCAV003, pp..
- A. J. Gee and B. Erdelyi, “Study and Comparison of the Method of Moments and the Single Level Fast Multipole Method for 2D Space Charge Tracking”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA15, pp. 207-209.
- B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2355-2358.
- A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156.
- Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX.
- A. S. Smygacheva, Ye. Fomin, V. Korchuganov, V. A. Ushakov, and A. G. Valentinov, “2.5 GeV Booster Synchrotron for a New Kurchatov Synchrotron Radiation Source”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 293-296.
- T. Kikuchi, T. Katayama, and S. Kawata, “Influences of Space Charge Effect during Ion Accumulation Using Moving Barrier Bucket Cooperated with Beam Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP19, pp. 206-209.
- F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941.
- H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 54-56.
- J. Walton, R. Dixon, H. Edwards, and J. McCarthy, “A Superconducting Dipole for the Fermilab Switchyard”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4056-4058.
- R. A. Kostin and C. Jing, “Conduction Cooled SRF Photogun for Electron Microscopy”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV001, pp..
- J. D. Sethian, R. A. Mahaffey, R. A. Meger, and D. N. Spector, “Collective Ion Acceleration Produced by Injecting a Rotating Relavistic Electron Beam into Neutral Hydrogen”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4193-4196.
- J. Carwardine, “Physics Requirements for Linac Stabilizations and Technical Solutions”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper WEOB03, pp. 433-437.
- R. Giacone et al., “Generation of Single Pulse Particle Beams in a Plasma Channel by Laser Injection in Laser Wakefield Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG039, pp. 1885-1887.
- M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84.
- A. S. Zabanov et al., “Simulation of the Electrostatic Deflector of DC140 Cyclotron”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 202-204.
- N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 346-348.
- E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
- Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX.
- S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 895-898.
- S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623.
- D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX.
- T.-C. Fan, C.-S. Hwang, F.-Y. Lin, and I. C. Hsu, “Pulsed Wire Magnetic Field Measurements on Undulator U10p”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH302, pp. 2775-2777.
- A. Cabrespine and C. Goldstein, “The Orsay Heavy Ion Accelerator (ALICE)”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper I-3, pp. 973-980.
- D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX.
Back to search