Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Nissen, B. Gamage, I. Neththikumara, J. Gubeli, K. Deitrick, and R. Bodenstein, “Final design and first use of in-situ measuring apparatus for measurement of permanent magnet resiliency in CEBAF’s radiation environment”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 759-762. doi:10.18429/JACoW-NAPAC2025-WEP037
[n] K. W. Jones, “Technological Challenges in the Path to 3.0 MW at the SNS Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 246-250. doi:10.18429/JACoW-NAPAC2016-TUA1IO03
[n] P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
[n] J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 179-185. doi:10.18429/JACoW-ICAP2018-TUPAF06
[n] A. Zholents et al., “Towards Attosecond X-ray Pulses from the FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF072, pp. 482-484.
[n] E. V. Valetov and M. Berz, “Main and Fringe Field Computations for the Electrostatic Quadrupoles of the Muon g-2 Experiment Storage Ring”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 313-319. doi:10.18429/JACoW-ICAP2018-TUPAG22
[n] S. R. Abbott, M. A. Leitner, C. M. Lyneis, C. E. Taylor, and D. C. Wutte, “Status of the Superconducting ECR Ion Source VENUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A01, pp. 1610-1612.
[n] P. Bosland, S. Cantacuz?¿ne, J. Gobin, M. Juillard, and J. Martignac, “NbTiN Thin Films for RF Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I45, pp. XX-XX.
[n] W. Fawley, R. Briggs, and S. Eylon, “RF Impedance Measurements on the DARHT-II Accelerator Intercell Assembly”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB038, pp. 3098-3100.
[n] H. J. Kwon, Y. S. Cho, B. H. Choi, J. M. Han, and K. K. Jeong, “RF Power Delivery System Design and Its Component Characterization for PEFP DTL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB017, pp. 1222-1224.
[n] I. H. Yu et al., “The Low Level RF System for 100MV Proton Linac of KOMAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB060, pp. 2857-2859.
[n] V. B. Graves et al., “Mercury Handling for the Target System for a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD038, pp. 2594-2596.
[n] W. Wan, J. N. Corlett, W. Fawley, and A. Zholents, “Design Study of the Bending Sections between Harmonic Cascade FEL Stages”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF073, pp. 485-487.
[n] M. A. Leitner, C. M. Lyneis, and D. Wutte, “The Berkeley 88-Inch Cyclotron Injector System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A02, pp. 1634-1638.
[n] G. Penn et al., “Harmonic Cascade FEL Designs for LUX”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF074, pp. 488-490.
[n] K. W. Jones, J. L. Erickson, and F. R. Gallegos, “The LANSCE Refurbishment (LANSCE-R) Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS062, pp. 1796-1798.
[n] E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1944-1946. doi:10.18429/JACoW-IPAC2015-TUPMA050
[n] H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n] P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 179-182.
[n] F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n] N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
[n] K. Hasegawa, “Progress and Operation Experiences of the J-PARC Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 257-260. doi:10.18429/JACoW-LINAC2016-MOPLR054
[n] C. M. Lyneis, M. A. Leitner, D. Wutte, C. E. Taylor, and S. R. Abbott, “VENUS: The Next Generation ECR Ion Source”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-1, pp. XX-XX.
[n] H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
[n] D. E. Johnson et al., “The Linac Laser Notcher for the Fermilab Booster”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 710-714. doi:10.18429/JACoW-LINAC2016-TH2A01
[n] N. Souchlas et al., “Energy Flow and Deposition in a 4-MW Muon Collider Target System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD036, pp. 2588-2590.
[n] L. Lin, L. Jahnel, and P. Tavares, “A Magnet Lattice for the LNLSUV Synchrotron Light Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1402-1405.
[n] M. S. Zolotorev, E. D. Commins, J. W. ONeill, F. Sannibale, A. S. Tremsin, and W. Wan, “First Experimental Results from DEGAS, the Quantum Limited Brightness Electron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBG04, pp. 1918-1920.
[n] M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
[n] F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054.
[n] F. Furuta et al., “Advanced Vertical Electro-Polishing studies at Cornell with Faraday”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 233-236. doi:10.18429/JACoW-LINAC2016-MOPLR047
[n] C. Wiesner et al., “Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2418-2421. doi:10.18429/JACoW-IPAC2019-WEPMP040
[n] D. S. Robin et al., “Successful Completion of the ALS Superbend Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUALA002, pp. 215-217.
[n] F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 579-582.
[n] C. C. Liang et al., “Characterization of the THz Radiation-Based Bunch Length Measurement System for the NSRRC Photoinjector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4080-4082. doi:10.18429/JACoW-IPAC2017-THPAB149
[n] A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549.
[n] J. M. Han et al., “Design of the KOMAC H$$/H$-$ RFQ Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4005, pp. 774-776.
[n] K. Beckert et al., “Fast Stochastic Cooling of Heavy Ions at the ESR Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A09, pp. 1262-1264.
[n] S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 229-231. doi:10.18429/JACoW-NAPAC2016-MOPOB71
[n] J. Pozimski, R. D, A. Jakob, P. Gro, and H. Klein, “Gabor-Plasma Lens Focusing for LEBT Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P007, pp. 174-176.
[n] D. Wutte, D. J. Clark, B. Laune, M. A. Leitner, and C. M. Lyneis, “High Intensity Ion Beam Iinjection Into the 88-Inch Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-6, pp. XX-XX.
[n] D. G. Kim, H.-C. Bhang, and J.-W. Kim, “Beam Emittance Measurement in the Injection Beam Line for a Cyclotron Accelerator Mass Spectrometer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS045, pp. 3523-3525.
[n] M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX.
[n] R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2514-2517. doi:10.18429/JACoW-IPAC2019-WEPGW021
[n] W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
[n] S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 22, pp. 37-40.
[n] R. J. Weggel, V. B. Graves, H. G. Kirk, and K. T. McDonald, “Magnet Design for the Target System of a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3976-3978. doi:10.18429/JACoW-IPAC2014-THPRI087
[n] S. Eylon, E. Henestroza, M. Vella, S. S. Yu, and C. Ekdahl, “Electron Beam, 3.5MV, 2kA Injector Diode Diagnostics for the DARHT Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH126, pp. 2380-2382.
[n] S. Matthies, H. Br?ñuning, A. Schwinn, and S. Deghaye, “FESA3 Integration in GSI for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO006, pp. 43-45.
[n] W. Y. Lin, B. Y. Chen, C. S. Huang, C. H. Kuo, and T. Y. Lee, “Control System Studio to Monitor Front End and Beamlines Status as well as Light Source Stability”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2687-2689. doi:10.18429/JACoW-IPAC2019-WEPGW087
[n] C. Matthews et al., “Exploring causes of Beam Loss at CEBAF”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6381, unpublished.
[n] P. Mandrillon et al., “Recent Activities of the Cyclotron Laboratory in Nice”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VI-05, pp. 248-251.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20.
[n] D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3619-3622. doi:10.18429/JACoW-IPAC2018-THPAL005
[n] D. Khan et al., “FFA@CEBAF beam transport error and tolerance simulation studies”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC84, unpublished.
[n] N. Tsoupas, A. Kayran, V. Litvinenko, and W. W. MacKay, “Uncoupled Achromatic Tilted S-bend”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC042, pp. 3071-3073.
[n] T. J. Loew, S. R. Abbott, M. L. Galloway, D. Leitner, and C. M. Lyneis, “Design of a High Temperature Oven for an ECR Source for the Production of Uranium Ion Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS044, pp. 1742-1744.
[n] D. E. Johnson et al., “MEBT Laser Notcher (Chopper) for Booster Loss Reduction”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 416-421. doi:10.18429/JACoW-HB2018-THP1WC01
[n] Y. W. Kang and S. W. Lee, “Modeling and Simulation of RFQs for Analysis of Fields and Frequency Deviations with Respect to Internal Dimensional Errors”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 810-812. doi:10.18429/JACoW-NAPAC2016-WEPOA52
[n] C. B. Shim et al., “High Power Test of PEFP RFQ”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21006, pp. XX-XX.
[n] K. W. Jones and J. D. Gilpatrick, “Looking Beyond LANSCE: The MaRIE Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOKNB02, pp. 21-21.
[n] Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC DTL”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94.
[n] C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
[n] K. Unser, “Beam Current Transformer with DC to 200 MHz Range”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 934-939.
[n] P. Mandrillon et al., “Progress of the Feasibility Studies of the European Light Ion Medical Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1790-1793.
[n] J. M. Han et al., “Development of a Low-Energy Proton Accelerator System for the Proton Engineering Frontier Project (PEFP)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB048, pp. 2832-2834.
[n] R. Grewe et al., “In-Situ Quality Factor Measurements of SRF Cavities at S-DALINAC”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 70-74. doi:10.18429/JACoW-SRF2023-MOPMB008
[n] A. Jakob, K. Reidelbach, J. Pozimski, R. D, and H. Klein, “Diagnostic of the Compensation Process of Ion Beams with a Time-Resolving Ion Energy Spectrometer”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P016, pp. 246-248.
[n] V. P. Busygin, A. V. Koltsov, and V. G. Kurakin, “Adjustable Computer Interface for Measurements and Control”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1A11, pp. 1847-1849.
[n] K. A. Belovintsev et al., “The Radiation Complex for Fundamental Reserach”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 861-864.
[n] R. J. Weggel et al., “Shielding of Superconducting Coils for a 4-MW Muon-Collider Target System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD037, pp. 2591-2593.
[n] L. Lin and L. Jahnel, “The Dynamic Aperture of the LNLS UVX2 Electron Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 673-676.
[n] A. D. Walker and E. L. Kerstiens, “1L Target Harp Diagnostic Display Tool”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 99-101. doi:10.18429/JACoW-IBIC2023-MOP033
[n] J. L. Crisp et al., “Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC20, pp. 1187-1189.
[n] N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 964-967.
[n] M. Vella and S. Nelson, “RF Cell Modeling and Experiments for Wakefield Minimization in DARHT-II”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB09, pp. 452-454.
[n] V. Litvinenko et al., “Progress with FEL-based Coherent Electron Cooling”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THDAU05, pp. 529-532.
[n] H. Bursali et al., “Impedance reduction of the beam gas ionization monitors for the CERN SPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3128-3131. doi:10.18429/JACoW-IPAC2024-THPC54
[n] A. V. Serov and A. V. Koltsov, “Transition Radiation Detector which Used Dihedral Angle as Radiator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA033, pp. 113-115.
[n] D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2057-2060.
[n] D. P. Brodrick et al., “Motion Control System for the European Spallation Source Target Wheel”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 717-721. doi:10.18429/JACoW-ICALEPCS2017-TUPHA129
[n] M. A. Leitner, C. M. Lyneis, and D. C. Wutte, “Design of the Extraction System of the Superconducting ECR Ion Source VENUS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPB004, pp. 67-69.
[n] V. G. Kurakin and P. V. Kurakin, “Non Linear Cumulative Interaction and Halo Heating in Multi Cavity Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1A12, pp. 1306-1308.
[n] Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814.
[n] J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
[n] W. S. Graves et al., “X-Ray Laser Seeding for Short Pulses and Narrow Bandwidth”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB066, pp. 959-961.
[n] J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
[n] N. A. Galyaev, Y. A. Chesnokov, V. I. Kotov, S. V. Tsarik, and V. N. Zapol, “Bent Single Crystals to Form High Energy Particle Beams”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 192-195.
[n] J. M. Han et al., “Design of a 350 MHz, CW RFQ for the KOMAC Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D007, pp. 89-91.
[n] G. Stover and K. Fowler, “Operating Results for the Beam Profile Monitor System Currently in Use at Bevalac Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 622-625.
[n] P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1647-1650.
[n] M. A. Leitner et al., “High-Current, High-Duty-Factor Experiments with the H- Ion Source for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA13, pp. 1911-1913.
[n] T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 352-354. doi:10.18429/JACoW-NAPAC2016-TUPOA30
[n] V. G. Kurakin and A. V. Koltsov, “ECOLOGICALLY CLEAN ACCELERATOR FOR NUCLEAR PHYSICS RESEARCH”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THCPH05, pp. XX-XX.
[n] D. Trbojevic et al., “Lattice Design for the ERL Electron Ion Collider in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA028, pp. 127-129.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Nissen, B. Gamage, I. Neththikumara, J. Gubeli, K. Deitrick, and R. Bodenstein, “Final design and first use of in-situ measuring apparatus for measurement of permanent magnet resiliency in CEBAF’s radiation environment”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 759-762.
- K. W. Jones, “Technological Challenges in the Path to 3.0 MW at the SNS Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 246-250.
- P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
- J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 179-185.
- A. Zholents et al., “Towards Attosecond X-ray Pulses from the FEL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF072, pp. 482-484.
- E. V. Valetov and M. Berz, “Main and Fringe Field Computations for the Electrostatic Quadrupoles of the Muon g-2 Experiment Storage Ring”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 313-319.
- S. R. Abbott, M. A. Leitner, C. M. Lyneis, C. E. Taylor, and D. C. Wutte, “Status of the Superconducting ECR Ion Source VENUS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A01, pp. 1610-1612.
- P. Bosland, S. Cantacuz?¿ne, J. Gobin, M. Juillard, and J. Martignac, “NbTiN Thin Films for RF Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I45, pp. XX-XX.
- W. Fawley, R. Briggs, and S. Eylon, “RF Impedance Measurements on the DARHT-II Accelerator Intercell Assembly”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB038, pp. 3098-3100.
- H. J. Kwon, Y. S. Cho, B. H. Choi, J. M. Han, and K. K. Jeong, “RF Power Delivery System Design and Its Component Characterization for PEFP DTL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB017, pp. 1222-1224.
- I. H. Yu et al., “The Low Level RF System for 100MV Proton Linac of KOMAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB060, pp. 2857-2859.
- V. B. Graves et al., “Mercury Handling for the Target System for a Muon Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD038, pp. 2594-2596.
- W. Wan, J. N. Corlett, W. Fawley, and A. Zholents, “Design Study of the Bending Sections between Harmonic Cascade FEL Stages”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF073, pp. 485-487.
- M. A. Leitner, C. M. Lyneis, and D. Wutte, “The Berkeley 88-Inch Cyclotron Injector System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A02, pp. 1634-1638.
- G. Penn et al., “Harmonic Cascade FEL Designs for LUX”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF074, pp. 488-490.
- K. W. Jones, J. L. Erickson, and F. R. Gallegos, “The LANSCE Refurbishment (LANSCE-R) Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS062, pp. 1796-1798.
- E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1944-1946.
- H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 245-248.
- P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 179-182.
- F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL169, pp. 2143-2146.
- N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
- K. Hasegawa, “Progress and Operation Experiences of the J-PARC Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 257-260.
- C. M. Lyneis, M. A. Leitner, D. Wutte, C. E. Taylor, and S. R. Abbott, “VENUS: The Next Generation ECR Ion Source”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper G-1, pp. XX-XX.
- H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
- D. E. Johnson et al., “The Linac Laser Notcher for the Fermilab Booster”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 710-714.
- N. Souchlas et al., “Energy Flow and Deposition in a 4-MW Muon Collider Target System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD036, pp. 2588-2590.
- L. Lin, L. Jahnel, and P. Tavares, “A Magnet Lattice for the LNLSUV Synchrotron Light Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1402-1405.
- M. S. Zolotorev, E. D. Commins, J. W. ONeill, F. Sannibale, A. S. Tremsin, and W. Wan, “First Experimental Results from DEGAS, the Quantum Limited Brightness Electron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOBG04, pp. 1918-1920.
- M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
- F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054.
- F. Furuta et al., “Advanced Vertical Electro-Polishing studies at Cornell with Faraday”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 233-236.
- C. Wiesner et al., “Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2418-2421.
- D. S. Robin et al., “Successful Completion of the ALS Superbend Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUALA002, pp. 215-217.
- F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 579-582.
- C. C. Liang et al., “Characterization of the THz Radiation-Based Bunch Length Measurement System for the NSRRC Photoinjector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4080-4082.
- A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549.
- J. M. Han et al., “Design of the KOMAC H$$/H$-$ RFQ Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4005, pp. 774-776.
- K. Beckert et al., “Fast Stochastic Cooling of Heavy Ions at the ESR Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A09, pp. 1262-1264.
- S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 229-231.
- J. Pozimski, R. D, A. Jakob, P. Gro, and H. Klein, “Gabor-Plasma Lens Focusing for LEBT Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P007, pp. 174-176.
- D. Wutte, D. J. Clark, B. Laune, M. A. Leitner, and C. M. Lyneis, “High Intensity Ion Beam Iinjection Into the 88-Inch Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper L-6, pp. XX-XX.
- D. G. Kim, H.-C. Bhang, and J.-W. Kim, “Beam Emittance Measurement in the Injection Beam Line for a Cyclotron Accelerator Mass Spectrometer”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS045, pp. 3523-3525.
- M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX.
- R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2514-2517.
- W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
- S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 22, pp. 37-40.
- R. J. Weggel, V. B. Graves, H. G. Kirk, and K. T. McDonald, “Magnet Design for the Target System of a Muon Collider/Neutrino Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3976-3978.
- S. Eylon, E. Henestroza, M. Vella, S. S. Yu, and C. Ekdahl, “Electron Beam, 3.5MV, 2kA Injector Diode Diagnostics for the DARHT Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH126, pp. 2380-2382.
- S. Matthies, H. Br?ñuning, A. Schwinn, and S. Deghaye, “FESA3 Integration in GSI for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO006, pp. 43-45.
- W. Y. Lin, B. Y. Chen, C. S. Huang, C. H. Kuo, and T. Y. Lee, “Control System Studio to Monitor Front End and Beamlines Status as well as Light Source Stability”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2687-2689.
- C. Matthews et al., “Exploring causes of Beam Loss at CEBAF”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6381, this conference.
- P. Mandrillon et al., “Recent Activities of the Cyclotron Laboratory in Nice”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VI-05, pp. 248-251.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20.
- D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3619-3622.
- D. Khan et al., “FFA@CEBAF beam transport error and tolerance simulation studies”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC84, unpublished.
- N. Tsoupas, A. Kayran, V. Litvinenko, and W. W. MacKay, “Uncoupled Achromatic Tilted S-bend”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC042, pp. 3071-3073.
- T. J. Loew, S. R. Abbott, M. L. Galloway, D. Leitner, and C. M. Lyneis, “Design of a High Temperature Oven for an ECR Source for the Production of Uranium Ion Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS044, pp. 1742-1744.
- D. E. Johnson et al., “MEBT Laser Notcher (Chopper) for Booster Loss Reduction”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 416-421.
- Y. W. Kang and S. W. Lee, “Modeling and Simulation of RFQs for Analysis of Fields and Frequency Deviations with Respect to Internal Dimensional Errors”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 810-812.
- C. B. Shim et al., “High Power Test of PEFP RFQ”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21006, pp. XX-XX.
- K. W. Jones and J. D. Gilpatrick, “Looking Beyond LANSCE: The MaRIE Facility”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOKNB02, pp. 21-21.
- Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC DTL”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94.
- C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
- K. Unser, “Beam Current Transformer with DC to 200 MHz Range”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 934-939.
- P. Mandrillon et al., “Progress of the Feasibility Studies of the European Light Ion Medical Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1790-1793.
- J. M. Han et al., “Development of a Low-Energy Proton Accelerator System for the Proton Engineering Frontier Project (PEFP)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB048, pp. 2832-2834.
- R. Grewe et al., “In-Situ Quality Factor Measurements of SRF Cavities at S-DALINAC”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB008, pp. 70-74.
- A. Jakob, K. Reidelbach, J. Pozimski, R. D, and H. Klein, “Diagnostic of the Compensation Process of Ion Beams with a Time-Resolving Ion Energy Spectrometer”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P016, pp. 246-248.
- V. P. Busygin, A. V. Koltsov, and V. G. Kurakin, “Adjustable Computer Interface for Measurements and Control”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1A11, pp. 1847-1849.
- K. A. Belovintsev et al., “The Radiation Complex for Fundamental Reserach”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 861-864.
- R. J. Weggel et al., “Shielding of Superconducting Coils for a 4-MW Muon-Collider Target System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD037, pp. 2591-2593.
- L. Lin and L. Jahnel, “The Dynamic Aperture of the LNLS UVX2 Electron Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 673-676.
- A. D. Walker and E. L. Kerstiens, “1L Target Harp Diagnostic Display Tool”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP033, pp. 99-101.
- J. L. Crisp et al., “Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC20, pp. 1187-1189.
- N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 964-967.
- M. Vella and S. Nelson, “RF Cell Modeling and Experiments for Wakefield Minimization in DARHT-II”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB09, pp. 452-454.
- V. Litvinenko et al., “Progress with FEL-based Coherent Electron Cooling”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THDAU05, pp. 529-532.
- H. Bursali et al., “Impedance reduction of the beam gas ionization monitors for the CERN SPS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC54, pp. 3128-3131.
- A. V. Serov and A. V. Koltsov, “Transition Radiation Detector which Used Dihedral Angle as Radiator”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA033, pp. 113-115.
- D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2057-2060.
- D. P. Brodrick et al., “Motion Control System for the European Spallation Source Target Wheel”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 717-721.
- M. A. Leitner, C. M. Lyneis, and D. C. Wutte, “Design of the Extraction System of the Superconducting ECR Ion Source VENUS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPB004, pp. 67-69.
- V. G. Kurakin and P. V. Kurakin, “Non Linear Cumulative Interaction and Halo Heating in Multi Cavity Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1A12, pp. 1306-1308.
- Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814.
- J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
- W. S. Graves et al., “X-Ray Laser Seeding for Short Pulses and Narrow Bandwidth”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB066, pp. 959-961.
- J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
- N. A. Galyaev, Y. A. Chesnokov, V. I. Kotov, S. V. Tsarik, and V. N. Zapol, “Bent Single Crystals to Form High Energy Particle Beams”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 192-195.
- J. M. Han et al., “Design of a 350 MHz, CW RFQ for the KOMAC Project”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D007, pp. 89-91.
- G. Stover and K. Fowler, “Operating Results for the Beam Profile Monitor System Currently in Use at Bevalac Facility”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 622-625.
- P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1647-1650.
- M. A. Leitner et al., “High-Current, High-Duty-Factor Experiments with the H- Ion Source for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA13, pp. 1911-1913.
- T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 352-354.
- V. G. Kurakin and A. V. Koltsov, “ECOLOGICALLY CLEAN ACCELERATOR FOR NUCLEAR PHYSICS RESEARCH”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THCPH05, pp. XX-XX.
- D. Trbojevic et al., “Lattice Design for the ERL Electron Ion Collider in RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA028, pp. 127-129.
Back to search