Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. Pierret et al., “Transport optimization and characterization of the 2kA AIRIX electron beam”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC03, pp. 494-496.
[n] S. Glukhov et al., “Possibilities for performance enhancement of a compact TDS at FLUTE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM087, unpublished.
[n] T. B. Bolin, S. Biedron, and S. Sosa, “HPC Modeling of a High-Gradient C-Band Linac for Hard X-Ray Free-Electron Lasers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 703-705. doi:10.18429/JACoW-IPAC2022-MOPOMS029
[n] J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX.
[n] P. Lotrus et al., “Status of the GBAR control project at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 531-533. doi:10.18429/JACoW-ICALEPCS2017-TUPHA059
[n] B. Gao, H. J. Chen, J. Chen, Y. B. Leng, K. R. Ye, and N. Zhang, “Wavefront Distortion Measurement at SSRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 332-334. doi:10.18429/JACoW-IPAC2017-MOPAB090
[n] H. Zhang, J. Grillenberger, and M. Seidel, “Beam Optics Considerations for Isotope Production at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 95-97. doi:10.18429/JACoW-Cyclotrons2016-MOP16
[n] Y. L. Zhang and G. Lei, “WPF Based EPICS Server and its Application in CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA011, pp. 3170-3172.
[n] O. Bourrion, D. Tourres, and C. Vescovi, “LLRF Electronics for the CNAO Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC139, pp. 1392-1394.
[n] T. Shintomi, M. Masuda, and S. Matsumoto, “New Method to Scale Down an Operation of a Large Accelerator Power Supply”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1361-1364.
[n] G. Sattonnay, V. Baglin, S. Bilgen, and B. Mercier, “DYVACS (DYnamic VACuum Simulation) Code: Calculation of Gas Density Profiles in Presence of Electron Cloud”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1244-1247. doi:10.18429/JACoW-IPAC2019-TUPMP007
[n] A. V. Tiunov et al., “Variants of Optics Schemes and Accelerator Configurations for Athens Microtron: Preliminary Considerations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ01, pp. 3285-3287.
[n] G. Papotti, T. Bohl, F. Follin, and U. Wehrle, “Longitudinal Beam Measurements at the LHC: The LHC Beam Quality Monitor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ022, pp. 1852-1854.
[n] S. Brandenburg, S. Kopecky, M. Versteegh, S. Gal?¿s, J. Guillot, and H. Laurent, “Acceleration of Low-Intensity Triton Beams with the AGOR Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-01, pp. XX-XX.
[n] S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n] S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674.
[n] V. N. Litvinenko, S. F. Mikhailov, O. A. Shevchenko, and Y. Wu, “Project for Generation of Femtosecond X-ray Beams from the Duke Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH071, pp. 2614-2616.
[n] W. Vinzenz, W. Gutowski, G. Hutter, and B. Rossa, “Status of the 36 MHz RF-System for the High-Current-Injector at GSI”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4070, pp. 219-221.
[n] U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 337-340. doi:10.18429/JACoW-LINAC2022-TUPOJO03
[n] S. Mazzoni et al., “A New Luminosity Monitor for the LHC Run 3”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 163-167. doi:10.18429/JACoW-IBIC2022-MOP45
[n] N. Mokhov and J. Strait, “Optimization of the LHC Interaction Region with Respect to Beam-induced Energy Deposition”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP028G, pp. 386-388.
[n] Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291.
[n] A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS018, unpublished.
[n] N. Gonzalez, L. Aballe, A. Carballedo, C. Colldelram, and M. Foerster, “A New High Precision, Fully Motorized 6-DoF Sample Stage for the ALBA PEEM Endstation”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 368-370. doi:10.18429/JACoW-MEDSI2018-THPH15
[n] S. Berlik and H. Ehrlichmann, “Adaptive Fuzzy Control for Transfer Channels in Particle Accelerators”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD18, pp. 178-180.
[n] J. Cuperus, F. Fabiani, and J. Nuttall, “The Beam Diagnostics System, Serving the Serpukhov Fast Ejection”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 523-528.
[n] R. Gavaggio, M. Steffensen, and P. M. Strubin, “Using Models to allow for Object Oriented Programming of the Vacuum Control Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1824-1827.
[n] T. Shintomi et al., “The Construction and Test Results of a 10T Dipole Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3719-3722.
[n] H. Gaiser and D. Boehne, “Copper Plating of Small Areas in Large Cavities”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3002-3004.
[n] J. R. Delayen and K. W. Shepard, “First Tests of a Superconducting RFQ Structure”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO413, pp. 76-78.
[n] F. J. Jia et al., “Beam Dynamic Design of a 100 mA, 162.5 Mhz High-Current Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP120, pp. 336-338.
[n] N. Venzin, N. Broca, M. Dole, D. Mcfarlane, B. Morand, and M. Munoz Codoceo, “Oxygen deficiency detection in the LHC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS007, unpublished.
[n] G. Bassi and J. Tagger, “Longitudinal Beam Dynamics With a Higher-Harmonic Cavity for Bunch Lengthening”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 202-208. doi:10.18429/JACoW-ICAP2018-TUPAF12
[n] C.-S. Huang et al., “The online emittance monitor at Taiwan Photon Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM072, unpublished.
[n] M. Dehnel, K. Erdman, T. Kuo, and L. Root, “Injection System Design and Test for the TR13 Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2367-2370.
[n] R. M. Talman, “Ring Circumference and Two Rings vs One Ring”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT4A3, pp. 27-32.
[n] J. Delayen, “Lorentz Detuning of Superconducting Cavities with Unbalanced Field Profiles”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB078, pp. 1380-1382.
[n] Z. Qi, C. Feng, B. Liu, W. Y. Zhang, and Z. T. Zhao, “Two-Color Soft X-Ray Generation at the SXFEL User Facility Based on the EEHG Scheme”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 84-86. doi:10.18429/JACoW-FEL2017-MOP023
[n] F. Zimmermann et al., “Performance Issues, Downtime Recovery and Tuning in the Next Linear Collider (NLC)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W018, pp. 608-632.
[n] Yu. G. Alenitcky et al., “CORRECTION OF THE CYCLOTRON RIC-30 MAGNETIC FIELD”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU02, pp. XX-XX.
[n] S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699.
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] Yu. Ts. Oganessian et al., “PROJECT OF THE U400R CYCLOTRON AT THE FLNR JINR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO04, pp. XX-XX.
[n] S. Evrard et al., “Consolidation of personnel safety systems at CERN”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS022, unpublished.
[n] K. Erdman et al., “Compact Commercial 9 MeV Deuteron Cyclotron with Pulsed Beam”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-28, pp. XX-XX.
[n] L. Scibile, R. Bartolome, A. Chouvelon, S. Grau, P. Ninin, and M. Trebulle, “Experience Using the Functional Safety Principles to Design the CERN Safety Alarm Monitoring System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP513, pp. XX-XX.
[n] A. Lehrach, “Beam and Spin Dynamics for Storage Ring Based EDM Search”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2454-2457. doi:10.18429/JACoW-IPAC2015-WEAB2
[n] C.-S. Huang, B.-Y. Chen, C.-J. Lin, C.-K. Kuan, T.-C. Tseng, and W.-Y. Lai, “Improving the uniformity of magnetron sputtering titanium film for nonlinear injection kicker”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3791-3793. doi:10.18429/JACoW-IPAC2024-THPS25
[n] P. Kneisel and M. G. Rao, “Performance of a CEBAF Production Cavity After High-Temperature Heat Treatment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 927-930.
[n] J. K. Burton et al., “Injector for Maryland E R A Project; Design Features and Initial Performance”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 321-324.
[n] R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 427-429. doi:10.18429/JACoW-MEDSI2018-THPH43
[n] O. N. Brezhnev et al., “Parallel-Coupled Accelerating Structures”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO474, pp. 213-215.
[n] A. J. Kozubal and R. E. Weiss, “Lessons Learned on the Ground Test Accelerator Control System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-57, pp. 834-836.
[n] M. A. Dehn, K. Aulenbacher, and V. Bechthold, “Pulse Response Measurements of NEA Photocathodes at Different Laser Wavelengths”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3931-3933. doi:10.18429/JACoW-IPAC2016-THPOW004
[n] S. Date et al., “Operation and Performance of the SPring-8 Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP35, pp. 2346-2348.
[n] A. Ermakov, C. Martens, and U. Naujoks, “Friction Stir Welding Attempts for UHV Applications: Stainless Steel/Aluminum”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 57-59. doi:10.18429/JACoW-MEDSI2018-TUPH15
For LaTeX
Use Complete Form
For BibTeX
References
- O. Pierret et al., “Transport optimization and characterization of the 2kA AIRIX electron beam”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC03, pp. 494-496.
- S. Glukhov et al., “Possibilities for performance enhancement of a compact TDS at FLUTE”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM087, this conference.
- T. B. Bolin, S. Biedron, and S. Sosa, “HPC Modeling of a High-Gradient C-Band Linac for Hard X-Ray Free-Electron Lasers”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 703-705.
- J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX.
- P. Lotrus et al., “Status of the GBAR control project at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 531-533.
- B. Gao, H. J. Chen, J. Chen, Y. B. Leng, K. R. Ye, and N. Zhang, “Wavefront Distortion Measurement at SSRF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 332-334.
- H. Zhang, J. Grillenberger, and M. Seidel, “Beam Optics Considerations for Isotope Production at the PSI Cyclotron Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 95-97.
- Y. L. Zhang and G. Lei, “WPF Based EPICS Server and its Application in CSNS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA011, pp. 3170-3172.
- O. Bourrion, D. Tourres, and C. Vescovi, “LLRF Electronics for the CNAO Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC139, pp. 1392-1394.
- T. Shintomi, M. Masuda, and S. Matsumoto, “New Method to Scale Down an Operation of a Large Accelerator Power Supply”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1361-1364.
- G. Sattonnay, V. Baglin, S. Bilgen, and B. Mercier, “DYVACS (DYnamic VACuum Simulation) Code: Calculation of Gas Density Profiles in Presence of Electron Cloud”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1244-1247.
- A. V. Tiunov et al., “Variants of Optics Schemes and Accelerator Configurations for Athens Microtron: Preliminary Considerations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ01, pp. 3285-3287.
- G. Papotti, T. Bohl, F. Follin, and U. Wehrle, “Longitudinal Beam Measurements at the LHC: The LHC Beam Quality Monitor”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ022, pp. 1852-1854.
- S. Brandenburg, S. Kopecky, M. Versteegh, S. Gal?¿s, J. Guillot, and H. Laurent, “Acceleration of Low-Intensity Triton Beams with the AGOR Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-01, pp. XX-XX.
- S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 329-331.
- S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674.
- V. N. Litvinenko, S. F. Mikhailov, O. A. Shevchenko, and Y. Wu, “Project for Generation of Femtosecond X-ray Beams from the Duke Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH071, pp. 2614-2616.
- W. Vinzenz, W. Gutowski, G. Hutter, and B. Rossa, “Status of the 36 MHz RF-System for the High-Current-Injector at GSI”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4070, pp. 219-221.
- U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 337-340.
- S. Mazzoni et al., “A New Luminosity Monitor for the LHC Run 3”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 163-167.
- N. Mokhov and J. Strait, “Optimization of the LHC Interaction Region with Respect to Beam-induced Energy Deposition”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP028G, pp. 386-388.
- Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291.
- A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS018, this conference.
- N. Gonzalez, L. Aballe, A. Carballedo, C. Colldelram, and M. Foerster, “A New High Precision, Fully Motorized 6-DoF Sample Stage for the ALBA PEEM Endstation”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 368-370.
- S. Berlik and H. Ehrlichmann, “Adaptive Fuzzy Control for Transfer Channels in Particle Accelerators”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD18, pp. 178-180.
- J. Cuperus, F. Fabiani, and J. Nuttall, “The Beam Diagnostics System, Serving the Serpukhov Fast Ejection”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 523-528.
- R. Gavaggio, M. Steffensen, and P. M. Strubin, “Using Models to allow for Object Oriented Programming of the Vacuum Control Systems”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1824-1827.
- T. Shintomi et al., “The Construction and Test Results of a 10T Dipole Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3719-3722.
- H. Gaiser and D. Boehne, “Copper Plating of Small Areas in Large Cavities”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3002-3004.
- J. R. Delayen and K. W. Shepard, “First Tests of a Superconducting RFQ Structure”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO413, pp. 76-78.
- F. J. Jia et al., “Beam Dynamic Design of a 100 mA, 162.5 Mhz High-Current Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP120, pp. 336-338.
- N. Venzin, N. Broca, M. Dole, D. Mcfarlane, B. Morand, and M. Munoz Codoceo, “Oxygen deficiency detection in the LHC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS007, this conference.
- G. Bassi and J. Tagger, “Longitudinal Beam Dynamics With a Higher-Harmonic Cavity for Bunch Lengthening”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 202-208.
- C.-S. Huang et al., “The online emittance monitor at Taiwan Photon Source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM072, this conference.
- M. Dehnel, K. Erdman, T. Kuo, and L. Root, “Injection System Design and Test for the TR13 Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2367-2370.
- R. M. Talman, “Ring Circumference and Two Rings vs One Ring”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT4A3, pp. 27-32.
- J. Delayen, “Lorentz Detuning of Superconducting Cavities with Unbalanced Field Profiles”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB078, pp. 1380-1382.
- Z. Qi, C. Feng, B. Liu, W. Y. Zhang, and Z. T. Zhao, “Two-Color Soft X-Ray Generation at the SXFEL User Facility Based on the EEHG Scheme”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 84-86.
- F. Zimmermann et al., “Performance Issues, Downtime Recovery and Tuning in the Next Linear Collider (NLC)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W018, pp. 608-632.
- Yu. G. Alenitcky et al., “CORRECTION OF THE CYCLOTRON RIC-30 MAGNETIC FIELD”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU02, pp. XX-XX.
- S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1696-1699.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- Yu. Ts. Oganessian et al., “PROJECT OF THE U400R CYCLOTRON AT THE FLNR JINR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO04, pp. XX-XX.
- S. Evrard et al., “Consolidation of personnel safety systems at CERN”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS022, this conference.
- K. Erdman et al., “Compact Commercial 9 MeV Deuteron Cyclotron with Pulsed Beam”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-28, pp. XX-XX.
- L. Scibile, R. Bartolome, A. Chouvelon, S. Grau, P. Ninin, and M. Trebulle, “Experience Using the Functional Safety Principles to Design the CERN Safety Alarm Monitoring System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP513, pp. XX-XX.
- A. Lehrach, “Beam and Spin Dynamics for Storage Ring Based EDM Search”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2454-2457.
- C.-S. Huang, B.-Y. Chen, C.-J. Lin, C.-K. Kuan, T.-C. Tseng, and W.-Y. Lai, “Improving the uniformity of magnetron sputtering titanium film for nonlinear injection kicker”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS25, pp. 3791-3793.
- P. Kneisel and M. G. Rao, “Performance of a CEBAF Production Cavity After High-Temperature Heat Treatment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 927-930.
- J. K. Burton et al., “Injector for Maryland E R A Project; Design Features and Initial Performance”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 321-324.
- R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 427-429.
- O. N. Brezhnev et al., “Parallel-Coupled Accelerating Structures”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO474, pp. 213-215.
- A. J. Kozubal and R. E. Weiss, “Lessons Learned on the Ground Test Accelerator Control System”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-57, pp. 834-836.
- M. A. Dehn, K. Aulenbacher, and V. Bechthold, “Pulse Response Measurements of NEA Photocathodes at Different Laser Wavelengths”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3931-3933.
- S. Date et al., “Operation and Performance of the SPring-8 Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP35, pp. 2346-2348.
- A. Ermakov, C. Martens, and U. Naujoks, “Friction Stir Welding Attempts for UHV Applications: Stainless Steel/Aluminum”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 57-59.
Back to search