JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Stowisek, R. M. Martini, and P. Sollander, “A J2EE Solution for Technical Infrastructure Monitoring at CERN”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT037, pp. 1912-1914. 
[n]	J. Popielarski et al., “FRIB Technology Demonstration Cryomodule Test”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB090, pp. 386-388. 
[n]	H. O. Moser and B. Krevet, “Emittance and Dynamic Aperture in Compact Storage Rings with Superconducting Bending Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 794-797. 
[n]	I. E. Pyros, “Design and Analysis of a Digital Neutron Detection System”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-5, pp. 1119-1132. 
[n]	F. Orsini and A. Mosnier, “Effect of RF Phase Modulation near a Parametric Resonance on the Longitudinal Emittance”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA105, pp. 2834-2836. 
[n]	S. M. Deambrosis et al., “A15 Superconductors by Thermal Diffusion in 6 GHz Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUOBAU07, pp. 155-158. 
[n]	D. P. May and G. Mouchaty, “Effect of the Main-Coil Position on the Accelerated Beam of the K500 Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-06, pp. 439-441. 
[n]	L. Wu, C. H. Li, H. Qu, H. Wang, X. L. Wang, and H. Y. Zhu, “Research on Magnetic Center Measurement of Quadrupole and Sextupole Using Vibrating Wire Alignment Technique in HEPS-TF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2860-2862. doi:10.18429/JACoW-IPAC2018-WEPML073
[n]	I. Haber, A. Friedman, D. A. Callahan, and A. B. Langdon, “Longitudinal Beam Dynamics for Heavy Ion Fusion”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 730-733. 
[n]	G. Ferrand et al., “Design of the HWR Cavities for SARAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2119-2121. doi:10.18429/JACoW-IPAC2016-WEPMB003
[n]	N. Chauvin et al., “Start-to-end Beam Dynamics Simulations for the Prototype Accelerator of the IFMIF/EVEDA Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS026, pp. 655-657. 
[n]	A. Bartalesi, Y. Cerenius, and S. Forcat Oller, “Status of the Front Ends Project at MAXIV”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2947-2949. doi:10.18429/JACoW-IPAC2016-WEPOW046
[n]	D. Schirmer, E. Kasel, B. Keil, and D. Zimoch, “The Evolution of the DELTA Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP003, pp. XX-XX. 
[n]	P. Linardakis, N. R. Lobanov, and D. C. Tempra, “Nanosecond Pulsing for Tandem Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1673-1675. doi:10.18429/JACoW-IPAC2019-TUPRB001
[n]	W. T. Link, “Electron Beams from 1011 - 1012 Watt Pulsed Accelerators”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 777-782. 
[n]	D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201. 
[n]	M. W. Krasny et al., “The CERN Gamma Factory Initiative: An Ultra-High Intensity Gamma Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1780-1783. doi:10.18429/JACoW-IPAC2018-WEYGBD3
[n]	C. A. Brau, H. L. Andrews, C. H. Boulware, and J. D. Jarvis, “Effect of Losses on the Gain and Start Current in Smith-Purcell Free-Electron Lasers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOC004, pp. XX-XX. 
[n]	M. af Ugglas et al., “Extending the Use of the CRYRING Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B07, pp. 545-547. 
[n]	G. Xu et al., “Recent Physical Studies for the HEPS Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2886-2888. doi:10.18429/JACoW-IPAC2016-WEPOW026
[n]	Z. H. Bai, L. Wang, D. R. Xu, and P. H. Yang, “Multi-bend Achromat Lattice with Interleaved Dispersion Bumps for a Diffraction-limited Storage Ring”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 52-54. doi:10.18429/JACoW-SAP2017-MOPH13
[n]	M. Agena, K. Euler, B. Franczak, F. Hinterberger, H. D. Rosendaal, and H. U. Schmidt, “External Ion Sources and Injection Lines at the Bonn Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-08, pp. 2156-2159. 
[n]	N. Pichoff et al., “The SARAF-LINAC Project 2018 Status”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 994-996. doi:10.18429/JACoW-IPAC2018-TUPAK015
[n]	J. P. Schapira and P. Mandrillon, “Axial Injection in the Orsay Project of a Superconducting Cyclotron and in the Medical Cyclotron MEDICYC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper I03, pp. 332-336. 
[n]	W. M. Visscher, “Simple Models for Beam-Blowup”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-04, pp. 284-293. 
[n]	Y. Y. Lee, M. Blaskiewicz, A. Fedotov, D. Raparia, J. Beebe-Wang, and W. T. Weng and J, “Linac Energy Manipulation for Longitudinal Phase Space Painting for SNS Ring”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO413, pp. 67-69. 
[n]	P. L?Âfgren et al., “Design of the Double Electrostatic Storage Ring DESIREE”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH093, pp. 252-254. 
[n]	H. Jenhani et al., “Validation Procedures for the IFMIF Power Coupler Prototypes”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP056, pp. 1043-1046. 
[n]	N. R. Lobanov, P. Linardakis, and D. Tsifakis, “Tuning the Superconducting Linac at Low Beam Intensities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB025, pp. 607-611. 
[n]	N. R. Lobanov, P. Linardakis, and D. Tsifakis, “Tuning the Linac With Superconducting Resonator Used as a Phase Detector”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB024, pp. 602-606. 
[n]	N. Saleh et al., “Towards Realizing Optical Injection of Electrons in Resonantly Excited Plasma Wakefields”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG054, pp. 1921-1923. 
[n]	N. J. Norris and R. K. Hanst, “Velocity Modulation System for Enhancement of 50 Picosecond Radiation Pulse”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 323-329. 
[n]	G. Andler et al., “Studies of Transverse Electron Cooling”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEOAF101, pp. 301-303. 
[n]	K. Hanke and A. Lombardi, “Design of A High-Intensity RFQ for A Possible LHC Laser Ion Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO433, pp. 109-111. 
[n]	D. Wu et al., “First Lasing of the CAEP THz FEL Facility Driven by a Superconducting Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1349-1352. doi:10.18429/JACoW-IPAC2018-TUPMF044
[n]	D. R. Xu, Z. H. Bai, G. Liu, L. Wang, and H. Xu, “Optimization of Closed Orbit Correction using Ant Colony Algorithm in HALS”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 55-58. doi:10.18429/JACoW-SAP2017-MOPH14
[n]	D. E. Potkins, M. P. Dehnel, T. Kubley, O. F. Toader, and N. R. Lobanov, “UniBEaM - Beam Profiler for Beam Characterization and Position Feedback”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 335-337. doi:10.18429/JACoW-IBIC2017-WEPCC02
[n]	P. Mereu et al., “ESS DTL Mechanical Design and Prototyping.”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2131-2133. doi:10.18429/JACoW-IPAC2016-WEPMB008
[n]	N. J. Norris and R. K. Hanst, “Picosecond Beam Monitors and Data-Acquisition System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 927-932. 
[n]	R. J. Bakker et al., “Experimental Observation of the Longitudinal Phase-space Distribution in a Storage Ring: Influence of the Beam Current and the Compaction Factor”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP087G, pp. 667-669. 
[n]	E. Chiadroni, M. Castellano, A. Cianchi, K. Honkavaara, and G. Kube, “New Experimental Results with Optical Diffraction Radiation Diagnostics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC018, pp. 1083-1085. 
[n]	F.-J. Decker et al., “Two and Multiple Bunches at LCLS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4378-4380. doi:10.18429/JACoW-IPAC2018-THPMK042
[n]	B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “A Hardware and Software Overview on the New BTF Transverse Profile Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 818-821. doi:10.18429/JACoW-IBIC2016-WEPG73
[n]	D. R. Welch, D. V. Rose, and S. A. MacLaren, “Beam Neutralization in the Scaled Final Focus Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH068, pp. 3003-3005. 
[n]	F. Sannibale et al., “Status and Plans for the LBNL Normal-Conducting CW VHF Photo-Injector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEOA05, pp. 470-472. 
[n]	Z. Zhang and H. Wang, “The Magnetic Measurement of Enhancer-Dipole Magnet for CEPC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2866-2868. doi:10.18429/JACoW-IPAC2018-WEPML076
[n]	E. Regenstreif, “Phase Space Acceptance of a General Triplet”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper H-10, pp. 899-904. 
[n]	R. A. Hoffswell and R. M. Laszewski, “Higher Modes in the Coupling Cells of Coaxial and Annular-Ring Coupled Linac Structures”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3588-3590. 
[n]	C. M. Mateo et al., “Non-interceptive Profile Measurements using an Optical-based Tomography Technique”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD58, pp. 437-439. 
[n]	Z. H. Bai, W. Li, G. Liu, L. Wang, D. R. Xu, and T. Zhang, “Study of Seven-Bend Achromat Lattices with Interleaved Dispersion Bumps for HALS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1495-1497. doi:10.18429/JACoW-IPAC2019-TUPGW040
[n]	W. Barth, “Commissioning of the 1.4 MeV/u High Current Heavy Ion Linac at GSI”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper FR201, pp. 1033-1037. 
[n]	A. Facco et al., “Superconducting RF Activities at LNL”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL014, pp. XX-XX. 
[n]	D. R. Xu and W. Xu, “Study on Beam-induced heating in injection section of Hefei Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 652-655. doi:10.18429/JACoW-IPAC2019-MOPRB036
[n]	S. Doering and U. Berges, “EPICS at the Synchrotron Radiation Source DELTA”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB32, pp. 232-234. 
[n]	D. Keefe, “Status of the ERA Research at Berkeley”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper H-11, pp. 905-917. 
[n]	Y. Z. He, M. F. Qian, H. F. Wang, W. Zhang, and Q. G. Zhou, “Cryogenic Permanent Magnet Undulator of SSRF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4449-4452. doi:10.18429/JACoW-IPAC2018-THPMK066
[n]	M. X. Li et al., “Superconducting 16-Pole Wiggler for Beijing Electron-Positron Collider II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2853-2855. doi:10.18429/JACoW-IPAC2018-WEPML071
[n]	V. Paxson, S. Peggs, and L. Schachinger, “Interactive First Turn and Global Closed Orbit Correction”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 824-827. 
[n]	L. Serafini and C. Pagani, “ITACA: A New Computer Code for the Integration of Transient Particle and Field Equations in Axi-Symmetrical Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 866-869. 
[n]	J. P. Schapira, R. Brizzi, and A. Le Goff, “AGOR Central Region Design”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-02, pp. 335-338. 
[n]	P. A. P. Nghiem et al., “The IFMIF-EVEDA Challenges and their Treatment”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1B03, pp. 309-313. 
[n]	D. Ji, Z. Duan, S. K. Tian, and Y. Wei, “Study of HEPS Performance with Error Model and Simulated Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 721-723. doi:10.18429/JACoW-IPAC2017-MOPIK081
[n]	L. H. A. Leunissen, “Influence of Vertical Dispersion and Crossing Angle on the Performance of the LHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP88, pp. 1683-1685. 
[n]	W. Tian, “The Development of a 128-Channel Ultra-Low Noise Trans-Impedance Amplifier System”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH1C03, unpublished. 
[n]	G. Castorina, G. Franzini, B. Spataro, M. Marongiu, A. Mostacci, and A. A. Nosych, “Stripline Beam Position Monitor Modelling and Simulations for Charge Measurements”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 247-250. doi:10.18429/JACoW-IBIC2017-TUPCF16
[n]	A. Pisent et al., “Measurement of Spin Motions in a Storage Ring Outside the Stable Polarization Direction”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 32-35. 
[n]	A. Schempp, H. Deitinghoff, C. J. Herrlander, A. Kaellberg, H. Klein, and A. Soltan, “RFQ-Injector for Cryring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 590-593. 
[n]	P. Schnizer, J. Bengtsson, and W. Sulaiman Khail, “Describing curved magnetic fields”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL128, unpublished. 
[n]	M. Li, Y. T. Yan, M. Syphers, and P. J. Channell, “Long-Term Tracking with Symplectic Implicit One-Turn Maps”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 38-41. 
[n]	E. Wang et al., “Electron Ion Collider Strong Hadron Cooling Injector and ERL”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 7-12. doi:10.18429/JACoW-LINAC2022-MO2AA04
[n]	K. Hedblom, A. Barany, A. Johansson, and D. Reistad, “Calculations on Multiturn and Stripping Injection in CELSIUS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 462-465. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search