Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. M. Hocker et al., “Design, Construction and Test of Cryogen-Free HTS Coil Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP165, pp. 1133-1135.
[n] D. Jimenez-Rey et al., “Status of the High Energy Beam Transport and Beam Dump Local Control System of the Linear IFMIF Prototype Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA074, pp. XX-XX.
[n] H. Piel et al., “Superconducting Cavities and their Applications - Recent Work at the University of Wuppertal”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89B01, pp. XX-XX.
[n] C. K. Sinclair, Y. He, and C. H. Smith, “Design for a 1.3 MW, 13 MeV Beam Dump for an Energy Recovery Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE025, pp. 1877-1879.
[n] D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796.
[n] C. Peschke, R. B?Âhm, C. Dimopoulou, F. Nolden, and P. Petri, “RF-System for Stochastic Cooling in the FAIR Collector Ring”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO20, pp. 146-148.
[n] J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2847-2850.
[n] R. Thomae et al., “Measurements on the LANSCE Upgrade H--Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA15, pp. 1917-1919.
[n] D. Proft, F. Frommberger, and W. Hillert, “Setup of a History Storage Engine based on Hypertable at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3128-3130. doi:10.18429/JACoW-IPAC2014-THPRO101
[n] M. Arnold et al., “Construction and Status of the Thrice Recirculating S-DALINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1384-1387. doi:10.18429/JACoW-IPAC2017-TUPAB030
For LaTeX
Use Complete Form
For BibTeX
References
- H. M. Hocker et al., “Design, Construction and Test of Cryogen-Free HTS Coil Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP165, pp. 1133-1135.
- D. Jimenez-Rey et al., “Status of the High Energy Beam Transport and Beam Dump Local Control System of the Linear IFMIF Prototype Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA074, pp. XX-XX.
- H. Piel et al., “Superconducting Cavities and their Applications - Recent Work at the University of Wuppertal”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89B01, pp. XX-XX.
- C. K. Sinclair, Y. He, and C. H. Smith, “Design for a 1.3 MW, 13 MeV Beam Dump for an Energy Recovery Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE025, pp. 1877-1879.
- D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796.
- C. Peschke, R. B?Âhm, C. Dimopoulou, F. Nolden, and P. Petri, “RF-System for Stochastic Cooling in the FAIR Collector Ring”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO20, pp. 146-148.
- J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2847-2850.
- R. Thomae et al., “Measurements on the LANSCE Upgrade H--Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA15, pp. 1917-1919.
- D. Proft, F. Frommberger, and W. Hillert, “Setup of a History Storage Engine based on Hypertable at ELSA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3128-3130.
- M. Arnold et al., “Construction and Status of the Thrice Recirculating S-DALINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1384-1387.
Back to search