Favourites
For Word
[n] D. G. Kim, J.-W. Kim, H.-C. Bhang, and J. Y. Kim, “Development of a Bunch Length Detector”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP090, pp. 617-619.
[n] A. Polyanskii et al., “SRF Cavity and Materials Ramp;D at Fermilab”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP82, pp. 213-215.
[n] G. A. Ludgate, “A Simplified Approach to Control System Specification and Design Using Domain Modelling and Mapping”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 505-510. doi:10.18429/JACoW-ICALEPCS1991-S14OOP02
[n] G. Wang et al., “Complex bend prototype beamline design and commissioning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 408-410. doi:10.18429/JACoW-IPAC2023-MOPA151
[n] J. Alonso, D. Dietrich, and H. Gould, “Charge Changing Cross Sections for Heavy Ions at Energies to 8.5 MeV/amu”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3686-3688.
[n] N. S. Ginzburg, V. R. Baryshev, A. Sergeev, and I. V. Zotova, “Production of 'Giant' Pulses of Scattered Radiation from Pump Wave Spot Runing over the Electron Beam”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH034, pp. 115-117.
[n] M. Kuntzsch et al., “Commissioning of the new ps timing system at ELBE”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS79, unpublished.
[n] J. P. Calame et al., “Design of 100 MW, Two-Cavity Gyroklystrons for Accelerator Applications”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ18, pp. 1563-1565.
[n] K. Hasegawa et al., “First Beam Test of the JAERI 2 MeV RFQ for the BTA”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-27, pp. 113-115.
[n] P. Piot and D. Mihalcea, “Simulation of Field-Emission Cathodes for High Current Electron Injectors”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP106, pp. 652-654.
[n] Y. Iwashita et al., “Creation of Peaks in the Energy Spectrum of Laser-Produced Ions by Phase Rotation”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP028, pp. 97-99.
[n] P. Drobniak et al., “Optimization of 200 MeV laser-plasma electron injector target using massive particle-in-cell simulation combined with fluid simulation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA099, unpublished.
[n] K. P. Harrig et al., “Ferrite Specification for the Mu2e 300 kHz and 4.4 MHz AC Dipole Magnets”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2816-2818. doi:10.18429/JACoW-IPAC2022-THPOTK023
[n] T. Shin, S. Choi, E. H. Kim, J. Y. Kim, D. D. Kim, and C. C. Yun, “Design and installation of the RAON in-flight fragment separator”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEP15, unpublished.
[n] K. J. Suthar, S. Sorsher, E. Trakhtenberg, and A. Zholents, “Vacuum Analysis of a Corrugated Waveguide Wakefield Accelerator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 160. doi:10.18429/JACoW-MEDSI2020-TUPB07
[n] M. Schütte, J. Georg, A. Grünhagen, and H. Schlarb, “Concept and Design of an Extensible Middle-Layer Application Framework for Accelerator Operations and Development”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 30-33. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO02
[n] T. Habermann, M. Kumm, and R. Singh, “Application of convolutional neural networks for pile up correction in single particle counting”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 152-156. doi:10.18429/JACoW-IBIC2025-MOPCO36
[n] R. J. Adler, G. F. Kiuttu, and B. Sabol, “Alternate Transport Techniques for Electron Induction Linacs”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3198-3201.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “A Vapour Source for ECR Ion Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI009, pp. 1697-1699.
For LaTeX
Use Complete Form
For BibTeX
References
- D. G. Kim, J.-W. Kim, H.-C. Bhang, and J. Y. Kim, “Development of a Bunch Length Detector”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP090, pp. 617-619.
- A. Polyanskii et al., “SRF Cavity and Materials Ramp;D at Fermilab”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP82, pp. 213-215.
- G. A. Ludgate, “A Simplified Approach to Control System Specification and Design Using Domain Modelling and Mapping”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S14OOP02, pp. 505-510.
- G. Wang et al., “Complex bend prototype beamline design and commissioning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA151, pp. 408-410.
- J. Alonso, D. Dietrich, and H. Gould, “Charge Changing Cross Sections for Heavy Ions at Energies to 8.5 MeV/amu”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3686-3688.
- N. S. Ginzburg, V. R. Baryshev, A. Sergeev, and I. V. Zotova, “Production of 'Giant' Pulses of Scattered Radiation from Pump Wave Spot Runing over the Electron Beam”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH034, pp. 115-117.
- M. Kuntzsch et al., “Commissioning of the new ps timing system at ELBE”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS79, unpublished.
- J. P. Calame et al., “Design of 100 MW, Two-Cavity Gyroklystrons for Accelerator Applications”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ18, pp. 1563-1565.
- K. Hasegawa et al., “First Beam Test of the JAERI 2 MeV RFQ for the BTA”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-27, pp. 113-115.
- P. Piot and D. Mihalcea, “Simulation of Field-Emission Cathodes for High Current Electron Injectors”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP106, pp. 652-654.
- Y. Iwashita et al., “Creation of Peaks in the Energy Spectrum of Laser-Produced Ions by Phase Rotation”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP028, pp. 97-99.
- P. Drobniak et al., “Optimization of 200 MeV laser-plasma electron injector target using massive particle-in-cell simulation combined with fluid simulation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA099, unpublished.
- K. P. Harrig et al., “Ferrite Specification for the Mu2e 300 kHz and 4.4 MHz AC Dipole Magnets”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2816-2818.
- T. Shin, S. Choi, E. H. Kim, J. Y. Kim, D. D. Kim, and C. C. Yun, “Design and installation of the RAON in-flight fragment separator”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEP15, unpublished.
- K. J. Suthar, S. Sorsher, E. Trakhtenberg, and A. Zholents, “Vacuum Analysis of a Corrugated Waveguide Wakefield Accelerator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 160.
- M. Schütte, J. Georg, A. Grünhagen, and H. Schlarb, “Concept and Design of an Extensible Middle-Layer Application Framework for Accelerator Operations and Development”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO02, pp. 30-33.
- T. Habermann, M. Kumm, and R. Singh, “Application of convolutional neural networks for pile up correction in single particle counting”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 152-156.
- R. J. Adler, G. F. Kiuttu, and B. Sabol, “Alternate Transport Techniques for Electron Induction Linacs”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3198-3201.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “A Vapour Source for ECR Ion Sources”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI009, pp. 1697-1699.
Back to search