Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Voelker and G. Lambertson, “Beam Impedance of Ferrite Kicker Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 851-854.
[n] An. M. Markin, V. A. Kalinin, and O. P. Lebedev, “Upgrading of the Power Supply for Magnet U-70 Synchrotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 335-336. doi:10.18429/JACoW-RUPAC2018-WEPSB26
[n] H. Thimmel and P. Wucherer, “Extraction from the Juelich 90 - Me V - d AEG-Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 474-479.
[n] L. L. Reginato and B. H. Smith, “Application of the Two-Power-Supply Method to the Ferrite Bias of an RF Resonator of a Rapid-Cycling Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 540-543.
[n] C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 15-18. doi:10.18429/JACoW-IBIC2022-MOP01
[n] J. M. Vogt, J. C. Bergstrom, and S. Hu, “Accurate Measurement of the Beam Energy in the CLS Storage Ring”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL004, pp. 36-37.
[n] C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 65-67. doi:10.18429/JACoW-LINAC2016-MOOP11
[n] M. Abliz, J. H. Grimmer, Y. Jaski, M. Ramanathan, and F. Westferro, “Clearing Magnet Design for APS-U”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1228-1230. doi:10.18429/JACoW-NAPAC2016-THPOA62
[n] E. R. Beadle, E. S. Rodger, and R. E. Thern, “A Beam Scraper Using a Linear Motor”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1474-1477.
[n] M. M. Patil et al., “Ultra-Fast Line-Camera KALYPSO for fs-Laser-Based Electron Beam Diagnostics”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 1-6. doi:10.18429/JACoW-IBIC2021-MOOB01
[n] R. D?Âlling, F. Marcellini, and M. Sapinski, “Test of a Prototype for Modular Profile and Position Monitors in the Shielding of the 590 MeV Beam Line at HIPA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 92-95. doi:10.18429/JACoW-IBIC2022-MOP24
[n] J. W. Davis, W. L. Gagnon, and B. H. Smith, “Experimental Studies of the Omnitron Electrical Components”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 250-257.
[n] C. Bianchini Mattison, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing System and Synchronous Bunch Data Acquisition”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 453-457. doi:10.18429/JACoW-IBIC2023-TH1I01
[n] K. V. Ettinger, J. H. Fremlin, and N. A. Askouri, “Measurement of Wear and Corrosion by Surface Irradiation with Charged Particle Beams”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-08, pp. 518-521.
[n] A. D. Petrov and T. B. Bolshakov, “Drag and Drop Display & Builder”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROPB03, pp. 695-697.
[n] J. Hao et al., “R&D of Niobium-Sputtered Copper QWR for Heavy Ion Linac in Peking University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E206, pp. 304-308.
[n] E. O. Ballard, E. A. Meyer, K. B. Riepe, H. L. Rutkowski, R. B. Shurter, and F. W. Van Haaften, “Design Status of Heavy Ion Injector Program”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1788-1791.
[n] B. Copy, E. Mandilara, I. Prieto Barreiro, and F. Varela, “Monitoring of CERN's Data Interchange Protocol (DIP) System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1797-1800. doi:10.18429/JACoW-ICALEPCS2017-THPHA162
[n] G. Wu, V. Bharadwaj, J. Lackey, D. McGinnis, and R. Tomlin, “A Pseudo Real Time Tune Meter for the Fermilab Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2228-2231.
[n] E. Kako et al., “Vertical test results on the STF baseline 9-cell cavities at KEK”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP10, pp. XX-XX.
[n] H. Reichau, O. Meusel, U. Ratzinger, and C. Wagner, “Optical Diagnostics for Frankfurt Neutron Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD60, pp. 443-445.
[n] S. Pande et al., “CODAC Standardisation of PLC Communication”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC004, pp. 1097-1099.
[n] A. Chabert, F. Loyer, and J. Sauret, “Beam Tuning and Stabilization Using Beam Phase Measurements at GANIL”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper M04, pp. 559-562.
[n] G. Lambertson, “Control of Coupled-bunch Instabilities in High-current Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2537-2542.
[n] P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412.
[n] O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
[n] S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 572-574. doi:10.18429/JACoW-LINAC2016-TUPLR048
[n] C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n] T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
[n] A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 484-488.
[n] J. F. O, J. F. Power, J. Ledford, J. D. Gilpatrick, M. Stettler, and J. Sage, “Design and Development of the LEDA Slow Wire Scanner Profile Measurement”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4059, pp. 186-188.
[n] S. Tariq et al., “Design of the LBNF Beamline Target Station”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 146-148. doi:10.18429/JACoW-NAPAC2016-MOPOB35
[n] G. Rehm, “Review of BPM Drift Effects and Compensation Schemes”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper MO3I1, unpublished.
[n] R. W. M??ller et al., “Heavy-Ion RFQ Accelerator MAXILAC Achieves 45 keV / AMU”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-31, pp. 328-329.
[n] H. Xu et al., “Recent progress of Shanghai laser electron gamma source (SLEGS) beamline in SSRF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1271-1273. doi:10.18429/JACoW-IPAC2023-MOPM132
[n] F. H. Cardoso, J. F. Citadini, S. R. Marques, X. R. Resende, and R. M. Seraphim, “Beam Position Interlock System for the LNLS 4 Tesla Superconducting Wiggler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA005, pp. 2478-2480.
[n] J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
[n] F. Di Maio et al., “The CODAC Software Distribution for the ITER Plant Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS029, pp. 227-230.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Voelker and G. Lambertson, “Beam Impedance of Ferrite Kicker Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 851-854.
- An. M. Markin, V. A. Kalinin, and O. P. Lebedev, “Upgrading of the Power Supply for Magnet U-70 Synchrotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 335-336.
- H. Thimmel and P. Wucherer, “Extraction from the Juelich 90 - Me V - d AEG-Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 474-479.
- L. L. Reginato and B. H. Smith, “Application of the Two-Power-Supply Method to the Ferrite Bias of an RF Resonator of a Rapid-Cycling Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 540-543.
- C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 15-18.
- J. M. Vogt, J. C. Bergstrom, and S. Hu, “Accurate Measurement of the Beam Energy in the CLS Storage Ring”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL004, pp. 36-37.
- C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 65-67.
- M. Abliz, J. H. Grimmer, Y. Jaski, M. Ramanathan, and F. Westferro, “Clearing Magnet Design for APS-U”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1228-1230.
- E. R. Beadle, E. S. Rodger, and R. E. Thern, “A Beam Scraper Using a Linear Motor”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1474-1477.
- M. M. Patil et al., “Ultra-Fast Line-Camera KALYPSO for fs-Laser-Based Electron Beam Diagnostics”, in Proc. 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, pp. 1-6.
- R. D?Âlling, F. Marcellini, and M. Sapinski, “Test of a Prototype for Modular Profile and Position Monitors in the Shielding of the 590 MeV Beam Line at HIPA”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 92-95.
- J. W. Davis, W. L. Gagnon, and B. H. Smith, “Experimental Studies of the Omnitron Electrical Components”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 250-257.
- C. Bianchini Mattison, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing System and Synchronous Bunch Data Acquisition”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TH1I01, pp. 453-457.
- K. V. Ettinger, J. H. Fremlin, and N. A. Askouri, “Measurement of Wear and Corrosion by Surface Irradiation with Charged Particle Beams”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper G-08, pp. 518-521.
- A. D. Petrov and T. B. Bolshakov, “Drag and Drop Display & Builder”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROPB03, pp. 695-697.
- J. Hao et al., “R&D of Niobium-Sputtered Copper QWR for Heavy Ion Linac in Peking University”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E206, pp. 304-308.
- E. O. Ballard, E. A. Meyer, K. B. Riepe, H. L. Rutkowski, R. B. Shurter, and F. W. Van Haaften, “Design Status of Heavy Ion Injector Program”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1788-1791.
- B. Copy, E. Mandilara, I. Prieto Barreiro, and F. Varela, “Monitoring of CERN's Data Interchange Protocol (DIP) System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1797-1800.
- G. Wu, V. Bharadwaj, J. Lackey, D. McGinnis, and R. Tomlin, “A Pseudo Real Time Tune Meter for the Fermilab Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2228-2231.
- E. Kako et al., “Vertical test results on the STF baseline 9-cell cavities at KEK”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP10, pp. XX-XX.
- H. Reichau, O. Meusel, U. Ratzinger, and C. Wagner, “Optical Diagnostics for Frankfurt Neutron Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD60, pp. 443-445.
- S. Pande et al., “CODAC Standardisation of PLC Communication”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC004, pp. 1097-1099.
- A. Chabert, F. Loyer, and J. Sauret, “Beam Tuning and Stabilization Using Beam Phase Measurements at GANIL”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper M04, pp. 559-562.
- G. Lambertson, “Control of Coupled-bunch Instabilities in High-current Storage Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2537-2542.
- P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 408-412.
- O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
- S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 572-574.
- C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4063-4065.
- T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
- A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 484-488.
- J. F. O, J. F. Power, J. Ledford, J. D. Gilpatrick, M. Stettler, and J. Sage, “Design and Development of the LEDA Slow Wire Scanner Profile Measurement”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4059, pp. 186-188.
- S. Tariq et al., “Design of the LBNF Beamline Target Station”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 146-148.
- G. Rehm, “Review of BPM Drift Effects and Compensation Schemes”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper MO3I1, unpublished.
- R. W. M??ller et al., “Heavy-Ion RFQ Accelerator MAXILAC Achieves 45 keV / AMU”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-31, pp. 328-329.
- H. Xu et al., “Recent progress of Shanghai laser electron gamma source (SLEGS) beamline in SSRF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM132, pp. 1271-1273.
- F. H. Cardoso, J. F. Citadini, S. R. Marques, X. R. Resende, and R. M. Seraphim, “Beam Position Interlock System for the LNLS 4 Tesla Superconducting Wiggler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA005, pp. 2478-2480.
- J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
- F. Di Maio et al., “The CODAC Software Distribution for the ITER Plant Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS029, pp. 227-230.
Back to search