JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. G. Kirk, V. B. Graves, K. T. McDonald, N. Souchlas, and R. J. Weggel, “A Target Magnet System for a Muon Collider and Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS053, pp. 1650-1652. 
[n]	O. I. Drivotin, “Covariant Formulation of the Vlasov Equation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC114, pp. 2277-2279. 
[n]	I. Badillo, M. Eguiraun, D. Piso, and J. Jugo, “Wireless Network Integration Into EPICS Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR008, pp. 3978-3980. 
[n]	T. Uesugi et al., “RF Capture of a Beam with Charge-exchanging Multi-turn Injection”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC158, pp. 454-456. 
[n]	K. Okabe et al., “H- Injection Studies of FFAG Accelerator at KURRI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS074, pp. 2676-2678. 
[n]	M. Krasilnikov et al., “High Brightness Photo Injector Upgrade and Experimental Optimization at PITZ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC114, pp. 3152-3154. 
[n]	X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513. 
[n]	T. Flisgen, J. Heller, and U. van Rienen, “Computation of Eigenmodes in Long and Complex Accelerating Structures by Means of Concatenation Strategies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 947-949. doi:10.18429/JACoW-IPAC2014-TUOAB01
[n]	J.-B. Lagrange et al., “Straight Scaling FFAG Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC022, pp. 1209-1211. 
[n]	D. Gavela et al., “Calculation and Design of a RF Cavity for a Novel Compact Superconducting Cyclotron for Radioisotope Production”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3055-3057. doi:10.18429/JACoW-IPAC2015-WEPMN057
[n]	F. Orsini et al., “Progress on the SRF Linac Developments for the IFMIF-LIPAC Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI004, pp. 3294-3296. 
[n]	C. Liebig, M. Huening, and M. Schmitz, “A New Injection System for an Electron/Positron Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP031, pp. 628-630. 
[n]	C. Yin Vallgren, S. Calatroni, P. Costa Pinto, A. Kuzucan, H. Neupert, and M. Taborelli, “Characterization of Carbon Coatings with Low Secondary Electron Yield”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS027, pp. 1587-1589. 
[n]	J.-B. Lagrange et al., “Straight Scaling FFAG”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS076, pp. 2682-2684. 
[n]	J. Heller, T. Flisgen, C. Schmidt, and U. van Rienen, “Quantification of Geometric Uncertainties in Single Cell Cavities for BESSY VSR using Polynomial Chaos”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 415-417. doi:10.18429/JACoW-IPAC2014-MOPME018
[n]	N. Garmendia et al., “Low Power RF Characterization of ESS Bilbao RFQ Cold Model”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3308-3310. doi:10.18429/JACoW-IPAC2014-THPME038
[n]	A. Velez et al., “Complete Electromagnetic Design of the ESS-Bilbao RFQ Cold Model”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR027, pp. 2991-2993. 
[n]	V. B. Graves et al., “Mercury Handling for the Target System for a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD038, pp. 2594-2596. 
[n]	R. J. Raatikainen, K. Osterberg, T. O. Niinikoski, and G. Riddone, “Progress on Modelling of the Thermo-Mechanical Behavior of the CLIC Two-Beam Module”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC018, pp. 1033-1035. 
[n]	T. Galek et al., “Aspects of SRF Cavity Optimization for BESSY-VSR Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 171-174. doi:10.18429/JACoW-IPAC2015-MOPWA032
[n]	A. Schick et al., “Ultrashort VUV and THz Pulse Generation at the DELTA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC016, pp. 2942-2944. 
[n]	D. Belver, J. Feuchtwanger, P. J. Gonzalez, F. J. Bermejo, V. Etxebarria, and J. Jugo, “Design and Measurements of a Test Stand for the SEM-Grid System of the ESS-BILBAO”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR040, pp. 867-869. 
[n]	R. Ferdinand, P. Bertrand, X. Hulin, M. Jacquemet, and E. Petit, “Progress of Construction and Installation of the SPIRAL2 Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO002, pp. 3755-3757. 
[n]	D. Malyutin, M. Krasilnikov, M. Otevrel, and F. Stephan, “Simulation of the Longitudinal Phase Space Measurement with Transverse Deflecting Structure at PITZ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP034, pp. 637-639. 
[n]	K.-H. Park et al., “Development of PAL-XFEL Magnet Power Supply”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3564-3566. doi:10.18429/JACoW-IPAC2016-THPMW013
[n]	Y. Mori et al., “Present Status of FFAG Proton Accelerator at KURRI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS077, pp. 2685-2687. 
[n]	O. Gonzalez et al., “Electromagnetic Simulations of the Input Power Couplers for the ESS-Bilbao RFQ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC043, pp. 172-174. 
[n]	Y. T. Ding et al., “Commissioning of the X-band Transverse Deflector for Femtosecond Electron/X-Ray pulse Length Measurements at LCLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOBB201, pp. 2091-2093. 
[n]	R. J. Weggel et al., “Shielding of Superconducting Coils for a 4-MW Muon-Collider Target System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD037, pp. 2591-2593. 
[n]	B. Riemann et al., “Two General Orbit Theorems for Efficient Measurements of Beam Optics”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 183-186. doi:10.18429/JACoW-IPAC2015-MOPWA035
[n]	M. Höner et al., “Bunch-by-bunch Feedback Systems at the DELTA Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR015, pp. 807-809. 
[n]	A. Fallahi et al., “Complete Simulation of Laser Induced Field Emission from Nanostructures Using a DGTD, PIC and FEM Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 645-648. doi:10.18429/JACoW-IPAC2014-MOPRI026
[n]	D. E. Kim et al., “Development of PAL-XFEL Undulator System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4044-4046. doi:10.18429/JACoW-IPAC2016-THPOW045
[n]	E. Yamakawa et al., “Serpentine Acceleration in Scaling FFAG”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR006, pp. 2946-2948. 
[n]	J. Munilla et al., “Design, Manufacturing and Tests of Closed-loop Quadrupole Mover Prototypes for European XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO026, pp. 535-537. 
[n]	A. Velez et al., “Design of the Radiofrequency Quadrupole Coldmodel for the ESS-BILBAO Linear Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC044, pp. 175-177. 
[n]	C. Liebig, M. Huening, and M. Schmitz, “Construction and First Tests of the New Injection System for the Linac II at DESY”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI011, pp. 303-305. 
[n]	E. Karantzoulis, “Elettra 2.0 - The Next Machine”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1532-1534. doi:10.18429/JACoW-IPAC2015-TUPWA052
[n]	G. Kube, C. Behrens, C. Gerth, B. Schmidt, W. Lauth, and M. Yan, “Inorganic Scintillators for Particle Beam Profile Diagnostics of Highly Brilliant and Highly Energetic Electron Beams”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOAA02, pp. 2119-2121. 
[n]	A. Stella, A. Ghigo, V. L. Lollo, F. Marcellini, and M. Serio, “Stripline BPM with Integral In-Vacuo Termination”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR023, pp. 828-830. 
[n]	N. Souchlas et al., “Energy Flow and Deposition in a 4-MW Muon Collider Target System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD036, pp. 2588-2590. 
[n]	M. Filippova et al., “Engineering Design and Fabrication of X-band RF Components”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC052, pp. 196-198. 
[n]	J. Feuchtwanger et al., “Status of the Ion Sources at ESS-Bilbao”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC030, pp. 1227-1229. 
[n]	B. Qin et al., “Compact FFAG Accelerators for Medium Energy Hadron Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS078, pp. 2688-2690. 
[n]	R. W. Assmann and J. Grebenyuk, “Accelerator Physics Challenges towards a Plasma Accelerator with Usable Beam Quality”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 961-964. doi:10.18429/JACoW-IPAC2014-TUOBB01
[n]	D. E. Kim et al., “Updates of the PAL-XFEL Undulator Program”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1675-1677. doi:10.18429/JACoW-IPAC2015-TUPJE032
[n]	H. G. Kirk et al., “Beam-power Deposition in a 4-MW Target Station for a Muon Collider or a Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS054, pp. 1653-1655. 
[n]	I. I. Isaev et al., “RF Photo Gun Stability Measurement at PITZ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC154, pp. 442-444. 
[n]	S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3220-3222. doi:10.18429/JACoW-IPAC2014-THPME007
[n]	R. W. Garnett, S. S. Kurennoy, J. F. O, L. Rybarcyk, and A. Schempp, “Progress towards an RFQ-based Front End for LANSCE”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS068, pp. 2658-2660. 
[n]	C. Yin Vallgren et al., “Performance of Carbon Coating for Mitigation of Electron Cloud in the SPS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS028, pp. 1590-1592. 
[n]	N. Gazis, G. Riddone, S. griffet, and A. Samoshkin, “Fabrication and Validation of the Prototype Supporting System for the CLIC Two-beam Modules”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC012, pp. 1015-1017. 
[n]	E. Yamakawa et al., “Serpentine Acceleration in Scaling FFAG”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS079, pp. 2691-2693. 
[n]	L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686. 
[n]	I. Moya et al., “Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC174, pp. 3308-3310. 
[n]	S. Sanz et al., “Fabrication and Testing of the First Magnet Package Prototype for the SRF Linac of LIPAc”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO030, pp. 2463-2465. 
[n]	A. Samoshkin, D. Gudkov, A. Solodko, and G. Riddone, “CLIC Two-Beam Module for the CLIC Conceptual Design and Related Experimental Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC008, pp. 1003-1005. 
[n]	Yu. A. Kubyshin et al., “RF and Accelerating Structure of 12 MeV UPC Race-track Microtron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC042, pp. 169-171. 
[n]	I. Arredondo et al., “Fast Acquisition Multipurpose Controller with EPICS Integration and Data Logging”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC155, pp. 2346-2348. 
[n]	I. Badillo, I. Arredondo, M. Eguiraun, J. Feuchtwanger, G. Harper, and J. Jugo, “Android Based Mobile Monitoring System for EPICS Networks: Vacuum System Application”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC152, pp. 2337-2339. 
[n]	G. Vashchenko et al., “Emittance Optimization for Different Bunch Charges with Upgraded Setup at PITZ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC115, pp. 3155-3157. 
[n]	M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387. 
[n]	Z. Izaola, M. Eguiraun, M. del Campo, and I. Bustinduy, “Implementation of a Workflow Model to Store and Analyze Measured Data at the ESS-Bilbao Ion Source Test Stand”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC168, pp. 2376-2378. 
[n]	M. Zeinalzadeh et al., “Temporal and Spatial Alignment of Electron Bunches and Ultrashort Laser Pulses for the CHG Experiment at DELTA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC017, pp. 2945-2947. 
[n]	H. S. Suh et al., “PAL-XFEL Magnet Design and Magnetic Measurement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1136-1138. doi:10.18429/JACoW-IPAC2016-TUPMB013
[n]	M. Eguiraun et al., “ISHN Ion Source Control System Overview and Future Developments”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC153, pp. 2340-2342. 
[n]	P. Ungelenk et al., “Temporal and Spectral Observation of Laser-induced THz Radiation at DELTA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA014, pp. 94-96. 
[n]	Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “Progress in the Injector Upgrade of the LINAC II at DESY”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1479-1481. doi:10.18429/JACoW-IPAC2015-TUPWA032
[n]	C. Zhang et al., “HSI RFQ Upgrade for the UNILAC Injection to FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 877-879. doi:10.18429/JACoW-IPAC2016-MOPOY016
[n]	D. Gavela et al., “Fabrication and Tests of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3884-3886. doi:10.18429/JACoW-IPAC2014-THPRI051
[n]	J. A. Rodriguez et al., “First Operational Experience of HIE-Isolde”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1284-1286. doi:10.18429/JACoW-IPAC2016-TUPMR023
[n]	P. Ungelenk et al., “Recent Developments at the DELTA THz Beamline”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP091, pp. XX-XX. 
[n]	I. Garcia-Cortes, A. Ibarra, R. Vila, E. Abad, R. Martinez, and F. J. Bermejo, “Scientific Feasibility of Fusion Material Irradiation Experiments in ESS-B”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS091, pp. 3648-3650. 
[n]	K. T. McDonald et al., “Design of the Mercury Handling System for a Muon Collider/Neutrino Factory Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI092, pp. 3505-3507. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search