Favourites
For Word
[n] E. Levichev and M. Skamarokha, “Intrabeam scattering in SRF "SKIF" storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS091, unpublished.
[n] B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 854-857. doi:10.18429/JACoW-LINAC2022-THPORI15
[n] S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 572-574. doi:10.18429/JACoW-LINAC2016-TUPLR048
[n] C. Johnstone, M. Berz, K. Makino, S. R. Koscielniak, and P. Snopok, “Isochronous (CW) High Intensity Non-scaling FFAG Proton Drivers”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCN7, pp. 2116-2118.
[n] J. Vieira, G. Ascenção, and S. Luiz, “Specification of insertion devices for ORION project at SIRIUS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM060, unpublished.
[n] P. Knaus and J. Uythoven, “Transient Thermal Analysis of Intense Proton Beam Loss on a Kicker Magnet Conductor Plate”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B01, pp. 2252-2254.
[n] W. X. Zhou et al., “The Remote Control System for LAPECR1”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA022, pp. 3192-3194.
[n] J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783.
[n] A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n] N. Marais, P. S. Swart, L. Van den Heever, and C. C. A. de Villiers, “Virtualization and Deployment Management for the KAT-7 / MeerKAT Control and Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBA06, pp. 1422-1425.
[n] M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523.
[n] M. S. Zisman, “R&D Toward a Neutrino Factory and Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOBN1, pp. 2056-2060.
[n] M. Boege et al., “Recent Results on Energy Calibration at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP15H, pp. 409-411.
[n] D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
For LaTeX
Use Complete Form
For BibTeX
References
- E. Levichev and M. Skamarokha, “Intrabeam scattering in SRF "SKIF" storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS091, this conference.
- B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 854-857.
- S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 572-574.
- C. Johnstone, M. Berz, K. Makino, S. R. Koscielniak, and P. Snopok, “Isochronous (CW) High Intensity Non-scaling FFAG Proton Drivers”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOCN7, pp. 2116-2118.
- J. Vieira, G. Ascenção, and S. Luiz, “Specification of insertion devices for ORION project at SIRIUS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM060, this conference.
- P. Knaus and J. Uythoven, “Transient Thermal Analysis of Intense Proton Beam Loss on a Kicker Magnet Conductor Plate”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B01, pp. 2252-2254.
- W. X. Zhou et al., “The Remote Control System for LAPECR1”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA022, pp. 3192-3194.
- J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 778-783.
- A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 575-578.
- N. Marais, P. S. Swart, L. Van den Heever, and C. C. A. de Villiers, “Virtualization and Deployment Management for the KAT-7 / MeerKAT Control and Monitoring System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOBA06, pp. 1422-1425.
- M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523.
- M. S. Zisman, “R&D Toward a Neutrino Factory and Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOBN1, pp. 2056-2060.
- M. Boege et al., “Recent Results on Energy Calibration at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP15H, pp. 409-411.
- D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 124-127.
Back to search
