Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. P?®rez et al., “ALBA II Acelerator Upgrade Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1467-1470. doi:10.18429/JACoW-IPAC2022-TUPOMS027
[n] M. Pasquato and P. Sivera, “Software Integration and Test Techniques in a Large Distributed Project: Evolution, Process Improvement, Results”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROAB03, pp. 508-510.
[n] S. A. Kahn and M. Diwan, “Spectrum from the Proposed BNL Very Long Baseline Neutrino Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT059, pp. 3476-3478.
[n] V. N. Buldakovsky et al., “Beam Extraction System of the Synchrophasotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3015-3018.
[n] A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
[n] G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
[n] M.-A. Tordeux et al., “Injection Schemes for the SOLEIL Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 796-798. doi:10.18429/JACoW-IPAC2021-MOPAB248
[n] J. E. Lerch, T. J. Bender, O. K. Mulvany, and M. E. Szubert, “APS Upgrade Insertion Device Vacuum Chamber Design”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 450-452. doi:10.18429/JACoW-NAPAC2019-TUPLS02
[n] G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 513-515. doi:10.18429/JACoW-LINAC2024-TUPB091
[n] J. Dietrich, C. Boehme, A. H. Botha, J. L. Conradie, P. F. Rohwer, and T. Weis, “Beam Profile Measurements Based on Light Radiation of Atoms Excited by the Particle Beam”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN020, pp. 3955-3957.
[n] M. Woods, J. Frisch, R. Alley, and M. Browne, “Operation of a Ti:Sapphire Laser for the SLAC Polarized Electron Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3047-3050.
[n] V. Musat, P. Burrows, S. Doebert, E. Granados, and A. Latina, “Photoinjector beam halo formation due to a secondary picosecond time-delayed laser pulse”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2260-2263. doi:10.18429/JACoW-IPAC2025-WEPS010
[n] D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 187-188. doi:10.18429/JACoW-PCaPAC2018-THP12
[n] R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
[n] C. Saribal, W. Hillert, C. Martens, and M. Wenskat, “Development of a Thermal Conductance Instrument for Niobium at Cryogenic Temperatures”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 109-113. doi:10.18429/JACoW-SRF2023-MOPMB017
[n] Y. Wu, B. Burnham, V. N. Litvinenko, J. M. J. Madey, and N. Hower, “Specific Features of Magnet Design for the Duke FEL Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2889-2892.
[n] R. Bassini, C. Birattari, M. Bonardi, M. Castiglioni, and M. Silari, “An Absolute Method for the Energy Calibration of Cyclotron Beams”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-05, pp. 291-294.
[n] J. Breunlin and G. Felcsuti, “Beam Stability in the MAX IV 3 GeV Storage Ring”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 370-373. doi:10.18429/JACoW-IBIC2022-WE2C2
[n] G. Horlitz, M. Clausen, H. Herzog, R. Lange, and H. Lierl, “The Cryogenic Operation of the Superconducting Magnet System in the HERA Proton Storage Ring: Cool Down, Steady State Operation, Quench Recovery Processes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2319-2322.
[n] M. H. R. Donald, “RF Beam Loading Effects in EPIC”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1843-1847.
[n] C. F. Fluder, M. Pezzetti, A. Tovar-Gonzalez, K. M. Mastyna, P. Peksa, and T. Wolak, “Status of the Process Control Systems Upgrade for the Cryogenic Installations of the LHC Based ATLAS and CMS Detectors”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1215. doi:10.18429/JACoW-ICALEPCS2019-WEPHA050
[n] D. Banerjee et al., “Target Bypass Beam Optics for Future High Intensity Fixed Target Experiments in the CERN North Area”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3046-3048. doi:10.18429/JACoW-IPAC2021-WEPAB185
[n] G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
[n] V. Musat et al., “A compact water window X-ray source based on inverse Compton scattering”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 441-444. doi:10.18429/JACoW-IPAC2024-MOPG76
[n] V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2342-2345.
[n] T. Ebisawa et al., “Basic Design and Consideration of Li-Vapor Contamination for A-FNS SRF”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 773-777. doi:10.18429/JACoW-SRF2023-WEPWB083
[n] O. Ferrando and E. Karantzoulis, “Studies of Optical Asymmetries in the ELETTRA Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH057, pp. 1793-1795.
[n] A. I. Warwick, “Alumino-Silicate Ion Sources for Accelerator Applications”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1809-1812.
[n] F. Poirier et al., “On-Going Operations with the Cyclotron C70 ARRONAX”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT010, pp. 49-51.
[n] Z. Ni, L. Li, J. Liu, J. Luo, X. Zhou, and Y. Gao, “The Design of Intelligent Integrated Control Software Framework of Facilities for Scientific Experiments”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 131. doi:10.18429/JACoW-ICALEPCS2019-MOMPL007
[n] M. Woods, J. Frisch, M. Zolotorev, R. Alley, and M. Browne, “The 1992 Polarized Light Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3045-3047.
[n] M. Liszcz and P. P. Goryl, “Tango Controls Benchmarking Suite”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1225. doi:10.18429/JACoW-ICALEPCS2019-WEPHA056
[n] R. Stassen, B. Breitkreutz, R. Greven, H. Schneider, and J. Wolters, “Kicker for the CR Stochastic Cooling System Based on HESR Slot-Ring Coupler”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 106-108. doi:10.18429/JACoW-COOL2023-THPOSRP23
[n] T. Kramer et al., “Performance of the PS Injection Kicker System Short Circuit Mode Upgrade for Operation with 2 GeV LIU Beams”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3308-3311. doi:10.18429/JACoW-IPAC2017-WEPVA023
[n] D. Degele et al., “DORIS at 2 x 5 GeV, Presented by D. Degele, The DORIS Storage Ring Group”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3135-3138.
[n] B. H. Smith, “Survey of R-F Techniques Applicable to Variable-Energy Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C05, pp. 159-166.
[n] H. L. Andrews et al., “Superlinear Current Dependence in a Grating-Based Tunable THz Source”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU02, pp. 192-195.
[n] J. Haimson, “Non-Cryogenic High Duty Cycle Electron Linear Accelerators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-9, pp. 775-802.
[n] J.-G. Marmouget, A. Binet, Ph. Guimbal, and J.-L. Coacolo, “Present Performance of the Low-emittance, High-bunch Charge ELSA Photo-injected Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI067, pp. 1795-1797.
[n] M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Development of the Pulse Transformer for NLC Klystrom Pulse Modulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P098, pp. 1322-1324.
[n] Th. Otto and M. Widorski, “New Operational Quantities for Radiation Protection by ICRU and ICRP: Impact on Workplaces at Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2231-2234. doi:10.18429/JACoW-IPAC2021-TUPAB316
[n] D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
[n] T. Margreiter et al., “Investigation for the applicability of a Hall probe measurement in B-field control for synchrotron duty cycle optimization”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3281-3284. doi:10.18429/JACoW-IPAC2024-THPG16
[n] J. T. Kwan, G. DeVolder, C. Goldstein, and M. Snell, “Study of a Non-Intrusive Electron Beam Radius Diagnostic”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P055, pp. 2174-2176.
[n] V. Schlott, D. Abramsohn, P. Beaud, G. Ingold, and P. Lerch, “THz Diagnostic for the Femtosecond Bunch Slicing Project at the Swiss Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH094, pp. 1229-1231.
[n] M. J. Lee, W. J. Corbett, and J. Wu, “A New Model-Independent Method for Optimization of Machine Settings and Electron Beam Parameters”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC023, pp. 308-310.
[n] S. Karabekyan, S. Abeghyan, W. Freund, and L. Froehlich, “Automation of the Undulator Middle Plane Alignment Relative to the Electron Beam Position Using the K-Monochromator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 374. doi:10.18429/JACoW-ICALEPCS2019-MOPHA069
[n] A. Lechner et al., “Dust-induced beam losses in the Large Hadron Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 59-62. doi:10.18429/JACoW-IPAC2024-MOPC10
[n] J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
[n] C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
[n] A. Laisn?® and D. Potaux, “Possible Pole Geometry Determination Method for an Isochronous Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B19, pp. 89-93.
[n] A. R. Donaldson, “Telemetry of Control and Monitoring Signals Across a High-Voltage Interface Using Light Links”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-9, pp. 591-600.
[n] P. Sievers, R. Bellone, A. Ijspeert, and P. Zanasco, “Development of Lithium Lenses at CERN”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3066-3069.
[n] H. Stockhorst et al., “Beam Shaping Using a New Digital Noise Generator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB20, pp. 2574-2576.
For LaTeX
Use Complete Form
For BibTeX
References
- F. P?®rez et al., “ALBA II Acelerator Upgrade Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1467-1470.
- M. Pasquato and P. Sivera, “Software Integration and Test Techniques in a Large Distributed Project: Evolution, Process Improvement, Results”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROAB03, pp. 508-510.
- S. A. Kahn and M. Diwan, “Spectrum from the Proposed BNL Very Long Baseline Neutrino Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT059, pp. 3476-3478.
- V. N. Buldakovsky et al., “Beam Extraction System of the Synchrophasotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3015-3018.
- A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
- G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
- M.-A. Tordeux et al., “Injection Schemes for the SOLEIL Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 796-798.
- J. E. Lerch, T. J. Bender, O. K. Mulvany, and M. E. Szubert, “APS Upgrade Insertion Device Vacuum Chamber Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 450-452.
- G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 513-515.
- J. Dietrich, C. Boehme, A. H. Botha, J. L. Conradie, P. F. Rohwer, and T. Weis, “Beam Profile Measurements Based on Light Radiation of Atoms Excited by the Particle Beam”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN020, pp. 3955-3957.
- M. Woods, J. Frisch, R. Alley, and M. Browne, “Operation of a Ti:Sapphire Laser for the SLAC Polarized Electron Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3047-3050.
- V. Musat, P. Burrows, S. Doebert, E. Granados, and A. Latina, “Photoinjector beam halo formation due to a secondary picosecond time-delayed laser pulse”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS010, pp. 2260-2263.
- D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 187-188.
- R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
- C. Saribal, W. Hillert, C. Martens, and M. Wenskat, “Development of a Thermal Conductance Instrument for Niobium at Cryogenic Temperatures”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB017, pp. 109-113.
- Y. Wu, B. Burnham, V. N. Litvinenko, J. M. J. Madey, and N. Hower, “Specific Features of Magnet Design for the Duke FEL Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2889-2892.
- R. Bassini, C. Birattari, M. Bonardi, M. Castiglioni, and M. Silari, “An Absolute Method for the Energy Calibration of Cyclotron Beams”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-05, pp. 291-294.
- J. Breunlin and G. Felcsuti, “Beam Stability in the MAX IV 3 GeV Storage Ring”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 370-373.
- G. Horlitz, M. Clausen, H. Herzog, R. Lange, and H. Lierl, “The Cryogenic Operation of the Superconducting Magnet System in the HERA Proton Storage Ring: Cool Down, Steady State Operation, Quench Recovery Processes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2319-2322.
- M. H. R. Donald, “RF Beam Loading Effects in EPIC”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1843-1847.
- C. F. Fluder, M. Pezzetti, A. Tovar-Gonzalez, K. M. Mastyna, P. Peksa, and T. Wolak, “Status of the Process Control Systems Upgrade for the Cryogenic Installations of the LHC Based ATLAS and CMS Detectors”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1215.
- D. Banerjee et al., “Target Bypass Beam Optics for Future High Intensity Fixed Target Experiments in the CERN North Area”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3046-3048.
- G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
- V. Musat et al., “A compact water window X-ray source based on inverse Compton scattering”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG76, pp. 441-444.
- V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2342-2345.
- T. Ebisawa et al., “Basic Design and Consideration of Li-Vapor Contamination for A-FNS SRF”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB083, pp. 773-777.
- O. Ferrando and E. Karantzoulis, “Studies of Optical Asymmetries in the ELETTRA Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH057, pp. 1793-1795.
- A. I. Warwick, “Alumino-Silicate Ion Sources for Accelerator Applications”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1809-1812.
- F. Poirier et al., “On-Going Operations with the Cyclotron C70 ARRONAX”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT010, pp. 49-51.
- Z. Ni, L. Li, J. Liu, J. Luo, X. Zhou, and Y. Gao, “The Design of Intelligent Integrated Control Software Framework of Facilities for Scientific Experiments”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 131.
- M. Woods, J. Frisch, M. Zolotorev, R. Alley, and M. Browne, “The 1992 Polarized Light Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3045-3047.
- M. Liszcz and P. P. Goryl, “Tango Controls Benchmarking Suite”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1225.
- R. Stassen, B. Breitkreutz, R. Greven, H. Schneider, and J. Wolters, “Kicker for the CR Stochastic Cooling System Based on HESR Slot-Ring Coupler”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP23, pp. 106-108.
- T. Kramer et al., “Performance of the PS Injection Kicker System Short Circuit Mode Upgrade for Operation with 2 GeV LIU Beams”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3308-3311.
- D. Degele et al., “DORIS at 2 x 5 GeV, Presented by D. Degele, The DORIS Storage Ring Group”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3135-3138.
- B. H. Smith, “Survey of R-F Techniques Applicable to Variable-Energy Cyclotrons”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C05, pp. 159-166.
- H. L. Andrews et al., “Superlinear Current Dependence in a Grating-Based Tunable THz Source”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUAAU02, pp. 192-195.
- J. Haimson, “Non-Cryogenic High Duty Cycle Electron Linear Accelerators”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-9, pp. 775-802.
- J.-G. Marmouget, A. Binet, Ph. Guimbal, and J.-L. Coacolo, “Present Performance of the Low-emittance, High-bunch Charge ELSA Photo-injected Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI067, pp. 1795-1797.
- M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Development of the Pulse Transformer for NLC Klystrom Pulse Modulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P098, pp. 1322-1324.
- Th. Otto and M. Widorski, “New Operational Quantities for Radiation Protection by ICRU and ICRP: Impact on Workplaces at Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2231-2234.
- D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
- T. Margreiter et al., “Investigation for the applicability of a Hall probe measurement in B-field control for synchrotron duty cycle optimization”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG16, pp. 3281-3284.
- J. T. Kwan, G. DeVolder, C. Goldstein, and M. Snell, “Study of a Non-Intrusive Electron Beam Radius Diagnostic”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P055, pp. 2174-2176.
- V. Schlott, D. Abramsohn, P. Beaud, G. Ingold, and P. Lerch, “THz Diagnostic for the Femtosecond Bunch Slicing Project at the Swiss Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH094, pp. 1229-1231.
- M. J. Lee, W. J. Corbett, and J. Wu, “A New Model-Independent Method for Optimization of Machine Settings and Electron Beam Parameters”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC023, pp. 308-310.
- S. Karabekyan, S. Abeghyan, W. Freund, and L. Froehlich, “Automation of the Undulator Middle Plane Alignment Relative to the Electron Beam Position Using the K-Monochromator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 374.
- A. Lechner et al., “Dust-induced beam losses in the Large Hadron Collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC10, pp. 59-62.
- J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
- C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
- A. Laisn?® and D. Potaux, “Possible Pole Geometry Determination Method for an Isochronous Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B19, pp. 89-93.
- A. R. Donaldson, “Telemetry of Control and Monitoring Signals Across a High-Voltage Interface Using Light Links”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-9, pp. 591-600.
- P. Sievers, R. Bellone, A. Ijspeert, and P. Zanasco, “Development of Lithium Lenses at CERN”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3066-3069.
- H. Stockhorst et al., “Beam Shaping Using a New Digital Noise Generator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB20, pp. 2574-2576.
Back to search