Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. T. Crofford et al., “The Spallation Neutron Source Cryomodule Test Stand RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC140, pp. 1395-1397.
[n] P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256.
[n] M. N. El-Shazly, G. G. Gulbeikian, A. I. Ivanenko, M. V. Khabarov, and A. V. Tikhomirov, “Vacuum Beam Losses in the Axial Injection Systems of the FLNR Heavy Ion Cyclotrons”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP08K, pp. 2172-2174.
[n] L. S. Montoya, S. M. Johnson, H. A. Watkins, and D. D. Zimmermann, “LANSCE QAC/DAQ Wire Scanner Instrumentation Upgrade”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 415-417. doi:10.18429/JACoW-IBIC2023-WEP029
[n] P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 706-708. doi:10.18429/JACoW-ICALEPCS2017-TUPHA126
[n] D. Li, J. Corlett, and W. Turner, “Temperature Distribution Calculations on Beryllium Windows in RF Cavities for a Muon Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4089, pp. 273-275.
[n] H. Hirano et al., “Measurements of Magnetic Axis and Twist of a Low-beta Quadrupole Magnet for LHC by using a Morgan Coil”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE011, pp. 2400-2402.
[n] R. Hino, P. Fajardo, N. Janvier, T. Le Caer, and F. Le Mentec, “A Position Encoder Processing Unit”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1557-1559. doi:10.18429/JACoW-ICALEPCS2017-THPHA072
[n] R. J. Macek and A. A. Browman, “Diagnostic for Electron Clouds Trapped in Quadrupoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT038, pp. 2547-2549.
[n] L. Van Loyen, D. Elefant, V. Palmieri, W. Venturini, and J. Halbritter, “Topography and Electrical Properties of Sputtered Niobium Films”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D35, pp. 1119-1124.
[n] L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964.
[n] J. Baehr et al., “High Power RF Conditioning and Measurement of Longitudinal Emittance at PITZ”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS03, pp. XX-XX.
[n] J. Petter, J. Marriner, D. McGinnis, and J. Misek, “New 4-8 GHz Core Cooling Pickups and Kickers for the Fermilab Accumulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 648-651.
[n] L. Walling, D. Neuffer, and G. Spalek, “Transmission-Line Impedance Measurements of Beam Pipes for an Advanced Hadron Faciliity”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1164-1167.
[n] C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
[n] A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
[n] G. Lawler et al., “Effects of bulk material properties on RF surface resistivity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1422-1424. doi:10.18429/JACoW-IPAC2023-TUPA038
[n] Y.-C. Chen et al., “Design, manufacturing and validation of fast-ramping alpha magnet for interleaving operation at ANL APS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS025, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- M. T. Crofford et al., “The Spallation Neutron Source Cryomodule Test Stand RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC140, pp. 1395-1397.
- P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256.
- M. N. El-Shazly, G. G. Gulbeikian, A. I. Ivanenko, M. V. Khabarov, and A. V. Tikhomirov, “Vacuum Beam Losses in the Axial Injection Systems of the FLNR Heavy Ion Cyclotrons”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP08K, pp. 2172-2174.
- L. S. Montoya, S. M. Johnson, H. A. Watkins, and D. D. Zimmermann, “LANSCE QAC/DAQ Wire Scanner Instrumentation Upgrade”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP029, pp. 415-417.
- P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 706-708.
- D. Li, J. Corlett, and W. Turner, “Temperature Distribution Calculations on Beryllium Windows in RF Cavities for a Muon Collider”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4089, pp. 273-275.
- H. Hirano et al., “Measurements of Magnetic Axis and Twist of a Low-beta Quadrupole Magnet for LHC by using a Morgan Coil”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE011, pp. 2400-2402.
- R. Hino, P. Fajardo, N. Janvier, T. Le Caer, and F. Le Mentec, “A Position Encoder Processing Unit”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1557-1559.
- R. J. Macek and A. A. Browman, “Diagnostic for Electron Clouds Trapped in Quadrupoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT038, pp. 2547-2549.
- L. Van Loyen, D. Elefant, V. Palmieri, W. Venturini, and J. Halbritter, “Topography and Electrical Properties of Sputtered Niobium Films”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D35, pp. 1119-1124.
- L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2961-2964.
- J. Baehr et al., “High Power RF Conditioning and Measurement of Longitudinal Emittance at PITZ”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS03, pp. XX-XX.
- J. Petter, J. Marriner, D. McGinnis, and J. Misek, “New 4-8 GHz Core Cooling Pickups and Kickers for the Fermilab Accumulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 648-651.
- L. Walling, D. Neuffer, and G. Spalek, “Transmission-Line Impedance Measurements of Beam Pipes for an Advanced Hadron Faciliity”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1164-1167.
- C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
- A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
- G. Lawler et al., “Effects of bulk material properties on RF surface resistivity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA038, pp. 1422-1424.
- Y.-C. Chen et al., “Design, manufacturing and validation of fast-ramping alpha magnet for interleaving operation at ANL APS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS025, this conference.
Back to search