JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Costa, A. Latina, and M. Olvegaard, “PLACET3: 6D tracking through PETS and accelerating structures wakefields”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2805-2808. doi:10.18429/JACoW-IPAC2023-WEPA067
[n]	C. M. Celata et al., “Transverse Combining of Four Beams in MBE-4”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPA10, pp. 3220-3222. 
[n]	W. Beeckman et al., “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: Magnetic System Design and Construction”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-13, pp. 218-221. 
[n]	D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX. 
[n]	H. J, J. H. Han, H.-S. Kang, S. H. Kim, H.-G. Lee, and S. B. Lee, “HLS to Measure Changes in Real Time in the Ground and Building Floor of PAL-XFEL, Large-Scale Scientific Equipment”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 503-506. doi:10.18429/JACoW-FEL2017-WEP041
[n]	B. H. Sun and Q. Chen, “Intense Heavy Ion Duoplasmatron Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-07, pp. 728-730. 
[n]	C. Peters, “Design and Construction of the 3.2 MeV Cathode Assembly for DARHT II”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB04, pp. 437-439. 
[n]	Y. L. Zhang et al., “Status of the CSNS Accelerator Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1669. doi:10.18429/JACoW-ICALEPCS2019-FRAPP03
[n]	Y. Makdisi, K. Brown, J. W. Glenn, and E. Rodger, “Beam Catcher/Dump”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3057-3060. 
[n]	S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362. 
[n]	A. Krivenko et al., “High Current Tandem Accelerator for Intense Monochromatic Gamma Rays Generation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE097, pp. 852-854. 
[n]	I. Makarov et al., “First Test of the X-Band Pulsed Magnicon”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2650-2653. 
[n]	L. R. Shen and D. K. Liu, “Present Status of SSRF Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB08, pp. 178-180. 
[n]	D. A. Gray, “Initial Operation of the SNS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2638-2643. 
[n]	C. P. Sargent and J. B. Flanz, “RF System for a 1 GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2614-2617. 
[n]	X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 16-19. doi:10.18429/JACoW-HIAT2025-MOB03
[n]	N. Voumard et al., “Trigger synchronization unit consolidation for SPS and LHC dumping kickers systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 447-452. doi:10.18429/JACoW-ICALEPCS2025-TUMR008
[n]	D. McGinnis, “Slotted Waveguide Slow-Wave Stochastic Cooling Arrays”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP100, pp. 1713-1715. 
[n]	S. Richter et al., “New compact modular in-vacuum undulators for SLS 2.0”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM069, unpublished. 
[n]	L. Maunoury et al., “SPIRAL1: A Versatile User Facility”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 29-33. doi:10.18429/JACoW-ECRIS2018-MOC4
[n]	R. J. Macek, D. H. Fitzgerald, R. York, M. Hoehn, and R. Ryder, “Status of the PSR Improvement Program”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3739-3742. 
[n]	S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1315-1318. doi:10.18429/JACoW-IPAC2025-TUPM068
[n]	O. V. Singh, “60 Hz Beam Motion Reduction at NSLS UV Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ27, pp. 2729-2731. 
[n]	L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX. 
[n]	C. G. Beetham, G. Daems, J. H. Lewis, and B. Puccio, “A New VME Timing Module: TG8”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 360-363. doi:10.18429/JACoW-ICALEPCS1991-S10TS05
[n]	S.-H. Jeong et al., “Programmable Power Supply for AC Switching Magnet of Proton Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE060, pp. 3508-3510. 
[n]	G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1656-1659. doi:10.18429/JACoW-IPAC2023-TUPA154
[n]	M. Petrichenkov et al., “Status of the Russian Accelerator Mass Spectrometer Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH195, pp. 2391-2393. 
[n]	J. C. Bergstrom, H. S. Caplan, B. E. Norum, and R. V. Servranckx, “SORE- - A Pulse Stretcher for the Saskatchewan 300-MeV Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3226-3229. 
[n]	J.-G. Wang, D. LeBon, R. McBrien, and T. Hunter, “Characterization of a SNS Transfer Line Dipole”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO038, pp. 2388-2390. 
[n]	J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2444-2447. 
[n]	L. Grubert, N. Barov, B. Cluggish, S. Galkin, and J. S. Kim, “Graphical Front-End and Object-Oriented Design for IonEx, an Ion Extraction Modeling Code”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP053, pp. 3324-3326. 
[n]	S. Choroba, J. Hameister, and M. Kuhn, “Performance of the Klystron Modulators at the S-Band Test Facility at DESY”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4068, pp. 213-215. 
[n]	U. Wienands et al., “Tracking Down a Fast Instability in the PEP-II LER”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS051, pp. 658-660. 
[n]	I. A. Aguilar et al., “Commissioning TRIUMF'S 2C Solid Target Facility Controls”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA27, pp. 371-373. 
[n]	P. Marchand, J. Cherix, C. Geiselhart, M. Pedrozzi, W. Portmann, and W. Tron, “Operation of the SLS RF System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI009, pp. 712-714. 
[n]	J. M. Han, H. H. Lee, K. Y. Seo, H. J. Kweon, Y. S. Cho, and B. H. Choi, “3.0 MeV KTF RFQ Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH412, pp. 632-634. 
[n]	P. Zagrajek et al., “Bunch length measurement based on Cherenkov radiation spectrum at PolFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL053, unpublished. 
[n]	J. Lyles et al., “A New 201.25 MHz High Power RF System for the LANSCE DTL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE061, pp. 2329-2331. 
[n]	P. Corcoran et al., “Experimental Tests of the Power Supply and Prototype Cell for the 1.5 MeV SLIA Acceleration Unit”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3114-3117. 
[n]	P. Forcket al., “”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. XX-XX. doi:10.18429/JACoW-IPAC2023-THPA002
[n]	J. Wyzula et al., “BEC widgets: A modern modular framework for Beamline Experiment Control”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1806-1811. doi:10.18429/JACoW-ICALEPCS2025-THPD093
[n]	D. A. Pepler et al., “The 10 Petawatt Upgrade Proposal For The Vulcan High-Power Laser”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP083, pp. 272-274. 
[n]	A. J. Dick, J. D. Jarvis, and P. Piot, “Characterization and Simulation of Optical Delay System for the Proof-of-Principle Experiment of Optical Stochastic Cooling at IOTA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3269-3272. doi:10.18429/JACoW-IPAC2021-WEPAB270
[n]	M. Pasquato and P. Sivera, “Software Integration and Test Techniques in a Large Distributed Project: Evolution, Process Improvement, Results”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROAB03, pp. 508-510. 
[n]	J. Benesch et al., “CEBAF 22 GeV FFA energy upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 962-964. doi:10.18429/JACoW-IPAC2023-MOPL182
[n]	M. Arnold et al., “Construction and Status of the Thrice Recirculating S-DALINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1384-1387. doi:10.18429/JACoW-IPAC2017-TUPAB030
[n]	R. P. Nunes, A. Bonatto, E. P. Maldonado, R. E. Samad, and N. D. Vieira, “Simulation Study of Laser Wakefield Acceleration Varying the Down-Ramp Length of a Gas Jet”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1717-1720. doi:10.18429/JACoW-IPAC2021-TUPAB142
[n]	D. Edstrom et al., “IOTA Proton Injector Beamline Installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1737-1739. doi:10.18429/JACoW-IPAC2023-TUPA183
[n]	P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406. 
[n]	H. Eickhoff et al., “The GSI Cancer Therapy Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B008, pp. 3801-3803. 
[n]	V. Mane, S. Peggs, D. Trbojevic, and W. Zhang, “RHIC Injection Kicker Impedance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC25, pp. 3134-3136. 
[n]	R. L. Kustom, F. R. Brumwell, E. F. Parker, C. W. Potts, and R. B. Wehrle, “A New Diagnostic System for Studying the Injector and Injection at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 518-523. 
[n]	A. J. Green, K. Zagar, L. Zambon, and M. Pelko, “Canone -- A Highly-Interactive Web-Based Control System Interface”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA20, pp. 129-131. 
[n]	A. J. Dick, J. D. Jarvis, and P. Piot, “Modeling of the Optical Stochastic Cooling at the IOTA Storage Ring Using ELEGANT”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2307-2310. doi:10.18429/JACoW-IPAC2022-WEPOMS029
[n]	Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511. 
[n]	A. Ijspeert and L. Vos, “Control of Background Rates in the Underground Physics Experiments at the CERN SPS Proton Antiproton Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1635-1638. 
[n]	D. Koser, J. M. Conrad, H. Podlech, U. Ratzinger, M. Schuett, and D. Winklehner, “Thermal Analysis of a Compact Split-Coaxial CW RFQ for the IsoDAR RFQ-DIP”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3097-3099. doi:10.18429/JACoW-IPAC2021-WEPAB202
[n]	A. J. Dick, M. B. Andorf, and P. Piot, “Progress Toward a Laser Amplifier for Optical Stochastic Cooling”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 434-436. doi:10.18429/JACoW-NAPAC2019-TUPLM26
[n]	P. K. Sigg, “SUMMARY OF THE 3RD WORKSHOP ON HIGH POWER RF-SYSTEMS FOR ACCELERATORS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20C1, pp. XX-XX. 
[n]	Y. Chung et al., “Local Beam Position Feedback Experiments on the ESRF Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ15, pp. 2699-2701. 
[n]	K. Brown, J. Niederer, T. Satogata, A. Alai Tafti, N. Tsoupas, and J. van Zeijts, “The RHIC/AGS Online Model Environments: Experiences and Design for AGS Modeling”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA46, pp. 2722-2724. 
[n]	G. Heidenreich and Th. Stammbach, “Some Aspects of the 100 uA Operation of the SIN Injector Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EC-04, pp. 365-370. 
[n]	J. Jarvis et al., “The Optical Stochastic Cooling Program at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA039, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search