Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
[n] J. O. Hill, L. R. Dalesio, and D. M. Kerstiens, “A Virtual Control Panel Configuration Tool for the X-Window System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 468-470. doi:10.18429/JACoW-ICALEPCS1991-S13MMI06
[n] T. Baer et al., “UFOs in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC137, pp. 1347-1349.
[n] O. Karamyshev, “A New Approach to Cyclotron Design”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 133-135. doi:10.18429/JACoW-IPAC2022-MOPOST032
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2348-2351.
[n] S. Appel and O. Boine-Frankenheim, “Optimization of Multi-turn Injection into a Heavy-Ion Synchrotron using Genetic Algorithms”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3689-3692. doi:10.18429/JACoW-IPAC2015-THPF007
[n] W. Schnell, “Report on the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1358-1363.
[n] M. Peiniger, M. Hein, N. Klein, G. M??ller, H. Piel, and P. Th??ns, “Work on Nb3Sn Cavities at Wuppertal”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E04, pp. XX-XX.
[n] E. Pozdeyev et al., “FRIB Front End Construction and Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 58-62. doi:10.18429/JACoW-IPAC2018-MOZGBF1
[n] E. Nebot Del Busto, B. Dehning, E. Effinger, V. Grishin, and J. F. Herranz Alvarez, “Study of the Response of Low Pressure Ionisation Chambers”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR047, pp. 888-890.
[n] R. F. Koontz, “A New Injector (NPI) for Nuclear Physics at SLAC”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0039, pp. 198-199.
[n] A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
[n] L. Celona et al., “Ion Source and Low Energy Beam Transport Line Final Commissioning Step and Transfer from INFN to ESS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1712-1714. doi:10.18429/JACoW-IPAC2018-TUPML073
[n] M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607.
[n] R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 59-63. doi:10.18429/JACoW-ICALEPCS2017-MOCPL03
[n] H. Kim, “Commissioning Experiences of the ALS Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2691-2694.
[n] T. Kikuchi, C. Buttapeng, N. Harada, K. Horioka, T. Sasaki, and K. Takayama, “Beamline for Warm Dense Matter Experiment Using the KEK Digital Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP095, pp. 1519-1521.
[n] S. Persichelli et al., “Impedance Studies of the Dummy Septum for CERN PS Multi-turn Extraction”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1704-1707. doi:10.18429/JACoW-IPAC2014-TUPRI058
[n] X. Guo, K. X. Liu, Z. Ni, Q. Feng, and C. Yang, “Fabrication of Large-area MgB2 Films on Copper Substrates”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 917-919. doi:10.18429/JACoW-SRF2017-THPB078
[n] W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 92-98. doi:10.18429/JACoW-ICALEPCS2017-MODPL02
[n] R. Pitthan et al., “SLC Positron Source-Simulation and Performance”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2098-2101.
[n] E. F. Wilson et al., “Experiences with Laser Survey Instrument Based Approach to National Ignition Facility Diagnostic Alignments”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 52-58. doi:10.18429/JACoW-ICALEPCS2017-MOCPL02
[n] J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308.
[n] R. F. Koontz, “CID Thermionic Gun System”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B10, pp. 62-64.
[n] A. Perillo Marcone et al., “Beam absorbing material candidates for primary collimators for FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL060, unpublished.
[n] R. J. Dejus, Y. Piao, M. F. Qian, J. M. TerHAAR, I. Vasserman, and J. Z. Xu, “Status of Insertion Device Tuning for the APS Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3966-3969. doi:10.18429/JACoW-IPAC2021-THPAB085
[n] X. Yang et al., “Online Optimization of NSLS-II Dynamic Aperture and Injection Transient”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1159-1162. doi:10.18429/JACoW-IPAC2022-TUPOPT064
[n] T. Shirai et al., “Beam Commissioning of Ion Cooler Ring, S-LSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS065, pp. 1642-1644.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
- J. O. Hill, L. R. Dalesio, and D. M. Kerstiens, “A Virtual Control Panel Configuration Tool for the X-Window System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S13MMI06, pp. 468-470.
- T. Baer et al., “UFOs in the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC137, pp. 1347-1349.
- O. Karamyshev, “A New Approach to Cyclotron Design”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 133-135.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2348-2351.
- S. Appel and O. Boine-Frankenheim, “Optimization of Multi-turn Injection into a Heavy-Ion Synchrotron using Genetic Algorithms”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3689-3692.
- W. Schnell, “Report on the ISR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1358-1363.
- M. Peiniger, M. Hein, N. Klein, G. M??ller, H. Piel, and P. Th??ns, “Work on Nb3Sn Cavities at Wuppertal”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E04, pp. XX-XX.
- E. Pozdeyev et al., “FRIB Front End Construction and Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 58-62.
- E. Nebot Del Busto, B. Dehning, E. Effinger, V. Grishin, and J. F. Herranz Alvarez, “Study of the Response of Low Pressure Ionisation Chambers”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR047, pp. 888-890.
- R. F. Koontz, “A New Injector (NPI) for Nuclear Physics at SLAC”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0039, pp. 198-199.
- A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
- L. Celona et al., “Ion Source and Low Energy Beam Transport Line Final Commissioning Step and Transfer from INFN to ESS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1712-1714.
- M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607.
- R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 59-63.
- H. Kim, “Commissioning Experiences of the ALS Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2691-2694.
- T. Kikuchi, C. Buttapeng, N. Harada, K. Horioka, T. Sasaki, and K. Takayama, “Beamline for Warm Dense Matter Experiment Using the KEK Digital Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP095, pp. 1519-1521.
- S. Persichelli et al., “Impedance Studies of the Dummy Septum for CERN PS Multi-turn Extraction”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1704-1707.
- X. Guo, K. X. Liu, Z. Ni, Q. Feng, and C. Yang, “Fabrication of Large-area MgB2 Films on Copper Substrates”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 917-919.
- W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 92-98.
- R. Pitthan et al., “SLC Positron Source-Simulation and Performance”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2098-2101.
- E. F. Wilson et al., “Experiences with Laser Survey Instrument Based Approach to National Ignition Facility Diagnostic Alignments”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 52-58.
- J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308.
- R. F. Koontz, “CID Thermionic Gun System”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B10, pp. 62-64.
- A. Perillo Marcone et al., “Beam absorbing material candidates for primary collimators for FCC-ee”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL060, unpublished.
- R. J. Dejus, Y. Piao, M. F. Qian, J. M. TerHAAR, I. Vasserman, and J. Z. Xu, “Status of Insertion Device Tuning for the APS Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3966-3969.
- X. Yang et al., “Online Optimization of NSLS-II Dynamic Aperture and Injection Transient”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1159-1162.
- T. Shirai et al., “Beam Commissioning of Ion Cooler Ring, S-LSR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS065, pp. 1642-1644.
Back to search