Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. H. Yue et al., “Consideration and Design of HEPS Beam Instrumentation”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THPP31, unpublished.
[n] V. K. Bharadwaj, J. E. Griffin, D. J. Harding, and J. A. MacLachlan, “Beam Transfer from the Debuncher to the Stacking Orbit of the Accumulator Ring at Fermilab”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1025-1028.
[n] L. Bernard et al., “Wide Dynamic Range (7 Decades) Beam Position and Profile Measurement for the CERN LEAR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2247-2250.
[n] A. C. de Lira, P. Bellomo, J. J. Lipari, and F. S. Rafael, “PEP-II Large Power Supplies Rebuild Program at SLAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE066, pp. 3685-3687.
[n] K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2839-2842.
[n] A. Marchionni et al., “Performance of Antiproton Injection and Extraction Transfer Lines of the Recycler Ring at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB012, pp. 1649-1651.
[n] D. G. Myakishev and V. P. Yakovlev, “CLANS2-A Code for Calculation of Multipole Modes in Axisymmetric Cavities with Absorber Ferrites”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA76, pp. 2775-2777.
[n] H. Yim, D. H. An, G. Hahn, and Y.-S. Kim, “Lattice Study of a Compact Synchrotron for Carbon Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-07, pp. 303-305.
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1705-1708. doi:10.18429/JACoW-IPAC2019-TUPRB013
[n] T. Reid, Z. A. Conway, S. M. Gerbick, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “Electropolishing for Low-Beta and Quasi-Waveguide SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3273-3275. doi:10.18429/JACoW-IPAC2015-WEPTY010
[n] D. Wutte, D. J. Clark, B. Laune, M. A. Leitner, and C. M. Lyneis, “High Intensity Ion Beam Iinjection Into the 88-Inch Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-6, pp. XX-XX.
[n] A. Chabert, G. Gendreau, P. Lapostolle, and P. Yvon, “Bunch Length Compression Inside a Separated Sector Isochronous Cyclotron and Related Problems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2122-2125.
[n] E. Blanco Vinuela, H. F. Braunmuller, B. Fernandez Adiego, and R. Speroni, “Safety Instrumented Systems and the AWAKE Plasma Control as a Use Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1206-1212. doi:10.18429/JACoW-ICALEPCS2017-THCPA01
[n] G. Gaitan et al., “Development of a Plasma-Enhanced Chemical Vapor Deposition System for High-Performance SRF Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 100-103. doi:10.18429/JACoW-SRF2023-MOPMB015
[n] G. Meyrand and K. Fujii, “Small Cyclotron for Medical Use: CYPRIS 325”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-11, pp. 137-139.
[n] Z. J. Ma, Y. D. Ding, N. Li, Q. B. Wang, M. Y. Yan, and Q. J. Zhang, “Radiation Shielding Considerations for CEPC-SPPC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2722-2724. doi:10.18429/JACoW-IPAC2016-WEPOR023
[n] A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842.
[n] S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452.
[n] J. Morgan et al., “First experimental demonstration of fully structured light in an EUV FEL”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG49, unpublished.
[n] H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
[n] T. Koseki et al., “Quadrupole and Sextupole Magnets for the Super SOR Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE065, pp. 2355-2357.
For LaTeX
Use Complete Form
For BibTeX
References
- J. H. Yue et al., “Consideration and Design of HEPS Beam Instrumentation”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THPP31, unpublished.
- V. K. Bharadwaj, J. E. Griffin, D. J. Harding, and J. A. MacLachlan, “Beam Transfer from the Debuncher to the Stacking Orbit of the Accumulator Ring at Fermilab”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1025-1028.
- L. Bernard et al., “Wide Dynamic Range (7 Decades) Beam Position and Profile Measurement for the CERN LEAR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2247-2250.
- A. C. de Lira, P. Bellomo, J. J. Lipari, and F. S. Rafael, “PEP-II Large Power Supplies Rebuild Program at SLAC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE066, pp. 3685-3687.
- K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2839-2842.
- A. Marchionni et al., “Performance of Antiproton Injection and Extraction Transfer Lines of the Recycler Ring at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB012, pp. 1649-1651.
- D. G. Myakishev and V. P. Yakovlev, “CLANS2-A Code for Calculation of Multipole Modes in Axisymmetric Cavities with Absorber Ferrites”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA76, pp. 2775-2777.
- H. Yim, D. H. An, G. Hahn, and Y.-S. Kim, “Lattice Study of a Compact Synchrotron for Carbon Therapy”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-07, pp. 303-305.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1705-1708.
- T. Reid, Z. A. Conway, S. M. Gerbick, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “Electropolishing for Low-Beta and Quasi-Waveguide SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3273-3275.
- D. Wutte, D. J. Clark, B. Laune, M. A. Leitner, and C. M. Lyneis, “High Intensity Ion Beam Iinjection Into the 88-Inch Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper L-6, pp. XX-XX.
- A. Chabert, G. Gendreau, P. Lapostolle, and P. Yvon, “Bunch Length Compression Inside a Separated Sector Isochronous Cyclotron and Related Problems”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2122-2125.
- E. Blanco Vinuela, H. F. Braunmuller, B. Fernandez Adiego, and R. Speroni, “Safety Instrumented Systems and the AWAKE Plasma Control as a Use Case”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1206-1212.
- G. Gaitan et al., “Development of a Plasma-Enhanced Chemical Vapor Deposition System for High-Performance SRF Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB015, pp. 100-103.
- G. Meyrand and K. Fujii, “Small Cyclotron for Medical Use: CYPRIS 325”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-11, pp. 137-139.
- Z. J. Ma, Y. D. Ding, N. Li, Q. B. Wang, M. Y. Yan, and Q. J. Zhang, “Radiation Shielding Considerations for CEPC-SPPC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2722-2724.
- A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842.
- S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452.
- J. Morgan et al., “First experimental demonstration of fully structured light in an EUV FEL”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG49, unpublished.
- H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
- T. Koseki et al., “Quadrupole and Sextupole Magnets for the Super SOR Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE065, pp. 2355-2357.
Back to search