Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. H. Ranjbar et al., “Progress on RCS eRHIC Injector Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 115-117. doi:10.18429/JACoW-IPAC2018-MOPMF016
[n] O. H. Rahman, J. Skaritka, and E. Wang, “Novel Design of a HVDC Magnetized Electron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4034-4036. doi:10.18429/JACoW-IPAC2021-THPAB141
[n] M. Neubauer, T. Blassick, R. Johnson, G. Kazakevich, M. Popovic, and J. Wessel, “Magnetron-driven superconducting linacs for UNF transmutation”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB082, unpublished.
[n] Y. Zhang, H. Z. Ma, and J. Yue, “Some Preliminary Experiments using LIBERA BPMs in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC107, pp. 1266-1268.
[n] R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929.
[n] F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404.
[n] D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
[n] G. Geloni et al., “Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL019, unpublished.
[n] S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1845-1847. doi:10.18429/JACoW-IPAC2014-WEOAA02
[n] S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
[n] G. Isoyama et al., “Solid-State Switch for a Klystron Modulator for Stable Operation of a THz- FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP058, pp. 868-870.
[n] S. Bai, J. Gao, P. Bambade, and G. R. White, “Simulation on the Breaking of x Multiknob Orthogonality in the Presence of Gradient and Coupling Errors and Experimental Investigation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO017, pp. 1919-1921.
[n] A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n] L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 227-230. doi:10.18429/JACoW-SRF2017-MOPB072
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 207-210.
[n] S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644.
[n] T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2147-2150.
[n] D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882.
[n] J. H. Han, K. Fl?Âttmann, J. Rowland, and S. Schreiber, “Jitter and Tolerance Study of FEL Injectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC45, pp. 344-347.
[n] E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2160-2162. doi:10.18429/JACoW-IPAC2019-TUPTS103
[n] Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712.
[n] W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 380-382. doi:10.18429/JACoW-IPAC2016-MOPMR058
[n] F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
[n] D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
[n] T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188.
[n] J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
[n] E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n] K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685.
[n] J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
[n] D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1563-1566.
[n] R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126.
[n] M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
[n] K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
[n] J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375.
[n] K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396.
[n] O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
[n] K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
[n] J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437.
[n] M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
[n] J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598.
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
[n] A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
[n] S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747.
[n] P. Adams, “Beamline Computer Control by Interpreter”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 361-363.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
[n] J. Safranek, “Beam Dynamics in Wigglers: Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1307-1310.
[n] M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296.
[n] D. McComick et al., “Long Ion Chamber Systems for the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1531-1534.
[n] H. Witte and J. S. Berg, “Conceptual Design of a Quadrupole Magnet for eRHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2729-2731. doi:10.18429/JACoW-IPAC2015-WEPJE026
[n] A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
[n] J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n] W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 544-547.
[n] D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX.
[n] R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1733-1736.
[n] O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
[n] R. Averill, K. Hatch, C. Sibley, and R. Gross, “Power Factor Correction at MIT-Bates Linear Accelerator Center with Pulsed Loads of up to 180 MW Peak (2.7 MW Average)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P058, pp. 3743-3745.
[n] H. Witte, I. Marneris, and V. H. Ranjbar, “Magnet Designs for the eRHIC Rapid Cycling Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2404-2406. doi:10.18429/JACoW-IPAC2018-WEPMF018
[n] W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
[n] K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1791-1794.
[n] C. Curtis, “Ion Source and Injector Development”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188.
[n] R. Connolly, P. Cameron, R. Michnoff, and S. Tepikian, “Performance of the RHIC IPM”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH033, pp. 1297-1299.
[n] J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
[n] F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
[n] J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4026-4027. doi:10.18429/JACoW-IPAC2017-THPAB129
[n] C. P. Sargent, “Accelerator Development at Bates”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3262-3267.
[n] E. Tanke et al., “Commissioning Plans for The SNS DTL and CCL”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU422, pp. 353-355.
[n] C. Hovater and J. Fugitt, “Analog Techniques in CEBAF's RF Control System”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-40, pp. 412-414.
[n] S. Matsuba et al., “Experimental Demonstration of Vector Beam Generation With Tandem Helical Undulators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1766-1768. doi:10.18429/JACoW-IPAC2019-TUPRB037
[n] C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
[n] H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
[n] R. Michnoff, “The RHIC General Purpose Multiplexed Analog to Digital Converter System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA17, pp. 2229-2231.
[n] B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
[n] Y. Hayashi, S. V. Bulanov, T. Homma, M. Kando, K. Kawase, and H. Kotaki, “Measurement of the Parametric X-rays with the Rocking Curve Method”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA058, pp. 208-210.
[n] V. Ptitsyn et al., “eRHIC - Future Machine for Experiments on Electron-ion Collisions”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS058, pp. 676-678.
[n] A. Saini, J.-P. Carneiro, B. M. Hanna, L. R. Prost, A. V. Shemyakin, and V. L. Sista, “Beam Optics Measurements in Medium Energy Beam Transport at PIP-II Injector Test Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 909-912. doi:10.18429/JACoW-IPAC2018-TUPAF077
[n] P. Bambade et al., “In Vacuum High Accuracy Mechanical Positioning System of Nano Resolution Beam Position Monitor at the Interaction Point of ATF2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB203, pp. 1149-1151.
[n] P. Li, Z. Dong, M. Li, J. C. Yang, and L. H. J. Bozyk, “Dynamic Vacuum Simulation for the BRing”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 186-188. doi:10.18429/JACoW-HB2018-TUP2WA04
[n] P. Mallon, D. Arbelaez, K. Hanzel, M. Kota, K. McCombs, and K. Ray, “Mechanical analysis and design for the LCLS-II-HE soft X-Ray undulator reconfiguration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 142-145. doi:10.18429/JACoW-IPAC2024-MOPC37
[n] M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390.
[n] J. Safranek and H. Wiedemann, “Low-Emittance in SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1104-1107.
[n] F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
[n] K. A. Drees, R. P. Fliller III, W. Fu, and R. Michnoff, “Continuous Abort Gap Cleaning at RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT162, pp. 908-910.
[n] D. El Khechen, P. Bambade, D. Jehanno, and C. Rimbault, “Fast Luminosity Monitoring using Diamond Sensors for the Super Flavor Factory SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3442-3444. doi:10.18429/JACoW-IPAC2014-THPME090
[n] Y. Kobayashi et al., “Present Status of PF-ring and PF-AR in KEK”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC035, pp. 2064-2066.
[n] K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279.
[n] F. Pilat, M. Hemmer, V. Ptitsin, S. Tepikian, and D. Trbojevic, “Processing and Analysis of the Measured Alignment Errors for RHIC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCL5, pp. 37-39.
[n] R. Averill et al., “Performance of the CEA as an e+e- Storage Ring”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 813-816.
[n] K. Breymayer et al., “SLAC Control Room Consolidation Using Linked Computers”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 409-412.
[n] E. Bjorklund, “Toward a General Theory of Control Knobs”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP071, pp. XX-XX.
[n] S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356.
[n] V. Chouhan et al., “Study of the Surface and Performance of Single-Cell Nb Cavities After Vertical EP Using Ninja Cathodes”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 217-219. doi:10.18429/JACoW-LINAC2016-MOPLR037
[n] S. V. Benson et al., “Kilowatt Lasing in a Free-Electron Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A19, pp. 764-766.
[n] B. P. Xiao et al., “HOM Consideration of 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 528-531. doi:10.18429/JACoW-IPAC2016-MOPMY009
[n] N. Solyak et al., “Lorentz Force Detuning Compensation Studies for Long Pulses in ILC type SRF Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB077, pp. 354-356.
[n] H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3428-3430. doi:10.18429/JACoW-IPAC2015-WEPTY065
[n] K. Kawase et al., “High Power Operation of the THz FEL at ISIR, Osaka University”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP073, pp. 528-531.
[n] J. N. Li, W. Q. Chen, F. Guo, and W. Jia, “A Low Jitter Pulse Generator Based on Two-stage Storage Module”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA023, pp. 711-713.
[n] J. Branlard et al., “LLRF Automation for the 9mA ILC Tests at FLASH”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB085, pp. 1023-1025.
[n] M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n] G. Y. Hsiung et al., “Operation Experiences of the SRRC 1.3 GeV Electron Storage Ring Vacuum System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2479-2482.
[n] V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 491-493. doi:10.18429/JACoW-LINAC2018-TUPO068
[n] W. Lavender et al., “The SSRL Injector Beam Position Monitoring Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1151-1154.
[n] F. Furuta et al., “Status and Challenges of Vertical Electro-Polishing R&D at Cornell”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1115-1118. doi:10.18429/JACoW-IPAC2017-MOPVA115
[n] C. C. Kuo et al., “Coupling Correction Study at NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB028, pp. 890-892.
[n] T. Zaugg, C. Rose, J. D. Schneider, J. Sherman, and R. Stevens Jr, “Operation of a Microwave Proton Source in Pulsed Mode”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4055, pp. 893-895.
[n] V. Ptitsyn et al., “eRHIC Design Status”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 628-631. doi:10.18429/JACoW-IPAC2018-TUYGBD3
[n] J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A203, pp. 25-28.
[n] L. M. Bollinger et al., “The Argonne Superconducting Heavy-Ion Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B07, pp. 95-101.
[n] R. Nietuby et al., “Status of PolFEL project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp..
[n] D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
[n] D. Teytelman, J. M. Byrd, J. Cao, and J. Yue, “Measurements of Coupled-Bunch Instabilities in BEPC-II”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP069, pp. 4114-4116.
[n] M. Farkhondeh et al., “Polarized Electron Beams for Nuclear Physics at the MIT Bates Accelerator Center”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FPAE031, unpublished.
[n] M. Ge et al., “Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 473-475. doi:10.18429/JACoW-LINAC2018-TUPO059
[n] L. Merminga et al., “ELIC: An Electron-Light Ion Collider Based at CEBAF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THAGB001, pp. 203-205.
[n] K. C. Harkay and Y.-C. Chae, “ERL Staging”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP079, pp. 1272-1274.
[n] B. Parker, R. B. Palmer, and H. Witte, “The eRHIC Interaction Region Magnets”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3624-3626. doi:10.18429/JACoW-IPAC2017-WEPVA151
[n] K. D. Jacobs et al., “Operational Experience with Resonantly Extracted Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH060, pp. 2587-2589.
[n] R. Averill et al., “Dependence of Phase Instabilities on Bunch Length at the CEA”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 765-768.
[n] G. Kazakevich, M. Popovic, and R. Johnson, “Studies of operation and control of CW magnetrons for HEP and ADS accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR30, unpublished.
[n] S. Kwon, M. S. Prokop, and A. Scheinker, “Robust Control of a Two-Input Two-Output (TITO) Multistate Cavity RF System ith Mismatched Uncertainty”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC090, pp. 3494-3496.
[n] O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and K. J. Wakefield, “NEG-Coated Copper Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 477-479. doi:10.18429/JACoW-NAPAC2019-TUPLS11
[n] I. Verstovsek, S. Peggs, T. Satogata, C. G. Trahern, and K. Zagar, “ESS Controls Strategy and Control Box Concept”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL026, pp. 183-185.
[n] Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1574-1576. doi:10.18429/JACoW-IPAC2018-TUPML020
[n] R. Bossart, “Resonant Beam Position Monitor for Low Intensity Ion Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 979-982.
[n] G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
[n] A. Vivoli, G. I. Cancelo, B. Chase, N. Solyak, and P. Varghese, “Longitudinal Beam Dynamics and LLRF Requirements for the Project X Pulsed Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUODB2, pp. 439-441.
[n] A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
[n] R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 286-291.
[n] P. C. Rogers, D. Potter, and V. Radeka, “Automatic Gain-Controlled Amplifier for Beam Profile Monitors”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 932-935.
[n] S. Simrock, J. Fugitt, C. Hovater, and S. Jones, “RF Control System Development at CEFAB”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1885-1888.
[n] O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and R. R. Swanson, “Discrete Photon Absorbers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 75. doi:10.18429/JACoW-MEDSI2020-MOPC11
[n] M. Popovic et al., “Compact CW 1-15 MeV 10-100 kW Electron Accelerators”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB093, unpublished.
[n] R. Bossart, “High Precision Beam Position Monitor Using a Re-entrant Coaxial Cavity (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-63, pp. 851-853.
[n] G. Isoyama et al., “Recent Progress in Upgrade of the High-Intensity THz-FEL at Osaka University”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 354-358. doi:10.18429/JACoW-FEL2015-TUP010
[n] K. Kawase et al., “Single Picosecond THz Pulse Extraction from the FEL Macropulse using a Laser Activating Semiconductor Reflective Switch”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 430-432. doi:10.18429/JACoW-FEL2015-TUP029
[n] J. Spanggaard, F. Arnold Malandain, P. Carriere, L. Ropelewski, and G. Tranquille, “Gas Electron Multipliers for Low Energy Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE061, pp. 1116-1118.
[n] S. Yamamoto, “Development of Very Short Period Undulators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1735-1739. doi:10.18429/JACoW-IPAC2018-WEXGBD1
[n] W. Liu, O. H. Rahman, and E. Wang, “High Voltage Design of a 350 kV DC Photogun at BNL”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 102-105. doi:10.18429/JACoW-NAPAC2019-MOPLM06
[n] R. Ito et al., “Construction of Thin-film Coating System Toward the Realization of Superconducting Multilayered Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 445-447. doi:10.18429/JACoW-LINAC2018-TUPO050
[n] S. Kashiwagi et al., “Manipulation and Measurement of Polarization State for THz Coherent Undulator Radiation”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 69-72. doi:10.18429/JACoW-LINAC2022-MOPOJO18
[n] J. van Zeijts, T. D'Ottavio, B. Frak, and R. Michnoff, “The RHIC Sequencer”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH008, pp. 782-784.
[n] S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2185-2188.
[n] J. J. Bisognano et al., “Use of the CEBAF Accelerator for IR and UV Free Electron Lasers”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-68, pp. 507-509.
[n] A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 85. doi:10.18429/JACoW-MEDSI2020-MOPC14
[n] J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481.
[n] J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1027-1030.
[n] C. Moir and P. Hughes, “Observation of Self-Steering Effects on the ITS 6-MeV Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W015, pp. 1144-1146.
[n] J. Flanz, E. Ihloff, R. Averill, and D. Tieger, “Octupole Magnet Design for the 1/2 Integer Resonant Extraction of Electrons from the South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2871-2874.
[n] E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3134-3136. doi:10.18429/JACoW-IPAC2018-THPAF068
[n] D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2865-2868.
[n] S. H. Chang et al., “The Comparison of Vacuum Performance in the Undulator Chambers Installed at the Taiwan Light Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA128, pp. 1375-1377.
[n] C. H. Chang et al., “The Commissioning Results of 1 m Prototype EPU5.6 in SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP33G, pp. 2225-2227.
[n] C. Moir, “Quadrupole Image-Current Effects in the ITS 6-MeV, 4-kA Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W014, pp. 1141-1143.
[n] S. Liu, N. Eddy, B. FELLENZ, and A. Semenov, “Development of BPM electronics for PIP-II at Fermilab”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 139-142. doi:10.18429/JACoW-IBIC2025-MOPCO31
[n] B. Blind and J. D. Gilpatrick, “LANSCE-Linac Beam-Centroid Jitter in Transverse Phase Space”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS050, pp. 4093-4095.
[n] B. Blind and A. J. Jason, “Laser Photoionization of H[degree] Beams for Charge-Changing Injection”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2795-2798.
[n] D. Baros, “Upgrading the Data Acquisition and Control System of the LANSCE LINAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP256, pp. 588-590.
[n] Y. Iwashita et al., “Diversified Application of ILC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 502-504. doi:10.18429/JACoW-IPAC2018-MOPML047
[n] S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2865-2868.
[n] F.-Z. Hsiao et al., “The Liquid Helium Cryogenic System for the Superconducting Cavity in SRRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH162, pp. 1604-1606.
[n] M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2868-2871.
[n] B. Blind, “Generation of a Rectangular Beam Distribution for Irradiation of the Accelerator Production of Tritium Target”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU453, pp. 453-455.
[n] R. Kinjo, T. Tanaka, A. Kagamihata, T. Seike, and S. Yamamoto, “Development of a Magnetic System to Cancel the Attractive Force toward Structural Reform of Undulators”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP023, pp. 75-79.
[n] R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
[n] G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 513-515. doi:10.18429/JACoW-LINAC2024-TUPB091
For LaTeX
Use Complete Form
For BibTeX
References
- V. H. Ranjbar et al., “Progress on RCS eRHIC Injector Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 115-117.
- O. H. Rahman, J. Skaritka, and E. Wang, “Novel Design of a HVDC Magnetized Electron Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4034-4036.
- M. Neubauer, T. Blassick, R. Johnson, G. Kazakevich, M. Popovic, and J. Wessel, “Magnetron-driven superconducting linacs for UNF transmutation”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB082, unpublished.
- Y. Zhang, H. Z. Ma, and J. Yue, “Some Preliminary Experiments using LIBERA BPMs in BEPCII”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC107, pp. 1266-1268.
- R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 926-929.
- F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404.
- D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
- G. Geloni et al., “Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL019, unpublished.
- S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1845-1847.
- S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
- G. Isoyama et al., “Solid-State Switch for a Klystron Modulator for Stable Operation of a THz- FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP058, pp. 868-870.
- S. Bai, J. Gao, P. Bambade, and G. R. White, “Simulation on the Breaking of x Multiknob Orthogonality in the Presence of Gradient and Coupling Errors and Experimental Investigation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO017, pp. 1919-1921.
- A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 575-578.
- L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 227-230.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 207-210.
- S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644.
- T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2147-2150.
- D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882.
- J. H. Han, K. Fl?Âttmann, J. Rowland, and S. Schreiber, “Jitter and Tolerance Study of FEL Injectors”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC45, pp. 344-347.
- E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2160-2162.
- Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712.
- W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 380-382.
- F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
- D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
- T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188.
- J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
- E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 582-585.
- K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685.
- J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
- D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1563-1566.
- R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1123-1126.
- M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
- K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
- J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375.
- K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396.
- O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
- K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
- J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437.
- M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
- J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 595-598.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
- A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
- S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747.
- P. Adams, “Beamline Computer Control by Interpreter”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 361-363.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
- J. Safranek, “Beam Dynamics in Wigglers: Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1307-1310.
- M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296.
- D. McComick et al., “Long Ion Chamber Systems for the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1531-1534.
- H. Witte and J. S. Berg, “Conceptual Design of a Quadrupole Magnet for eRHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2729-2731.
- A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
- J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566.
- W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 544-547.
- D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX.
- R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1733-1736.
- O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1556-1559.
- R. Averill, K. Hatch, C. Sibley, and R. Gross, “Power Factor Correction at MIT-Bates Linear Accelerator Center with Pulsed Loads of up to 180 MW Peak (2.7 MW Average)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P058, pp. 3743-3745.
- H. Witte, I. Marneris, and V. H. Ranjbar, “Magnet Designs for the eRHIC Rapid Cycling Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2404-2406.
- W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
- K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1791-1794.
- C. Curtis, “Ion Source and Injector Development”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188.
- R. Connolly, P. Cameron, R. Michnoff, and S. Tepikian, “Performance of the RHIC IPM”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH033, pp. 1297-1299.
- J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
- F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
- J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4026-4027.
- C. P. Sargent, “Accelerator Development at Bates”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3262-3267.
- E. Tanke et al., “Commissioning Plans for The SNS DTL and CCL”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU422, pp. 353-355.
- C. Hovater and J. Fugitt, “Analog Techniques in CEBAF's RF Control System”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-40, pp. 412-414.
- S. Matsuba et al., “Experimental Demonstration of Vector Beam Generation With Tandem Helical Undulators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1766-1768.
- C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
- H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
- R. Michnoff, “The RHIC General Purpose Multiplexed Analog to Digital Converter System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA17, pp. 2229-2231.
- B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
- Y. Hayashi, S. V. Bulanov, T. Homma, M. Kando, K. Kawase, and H. Kotaki, “Measurement of the Parametric X-rays with the Rocking Curve Method”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA058, pp. 208-210.
- V. Ptitsyn et al., “eRHIC - Future Machine for Experiments on Electron-ion Collisions”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS058, pp. 676-678.
- A. Saini, J.-P. Carneiro, B. M. Hanna, L. R. Prost, A. V. Shemyakin, and V. L. Sista, “Beam Optics Measurements in Medium Energy Beam Transport at PIP-II Injector Test Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 909-912.
- P. Bambade et al., “In Vacuum High Accuracy Mechanical Positioning System of Nano Resolution Beam Position Monitor at the Interaction Point of ATF2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOCB203, pp. 1149-1151.
- P. Li, Z. Dong, M. Li, J. C. Yang, and L. H. J. Bozyk, “Dynamic Vacuum Simulation for the BRing”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 186-188.
- P. Mallon, D. Arbelaez, K. Hanzel, M. Kota, K. McCombs, and K. Ray, “Mechanical analysis and design for the LCLS-II-HE soft X-Ray undulator reconfiguration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC37, pp. 142-145.
- M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390.
- J. Safranek and H. Wiedemann, “Low-Emittance in SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1104-1107.
- F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
- K. A. Drees, R. P. Fliller III, W. Fu, and R. Michnoff, “Continuous Abort Gap Cleaning at RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT162, pp. 908-910.
- D. El Khechen, P. Bambade, D. Jehanno, and C. Rimbault, “Fast Luminosity Monitoring using Diamond Sensors for the Super Flavor Factory SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3442-3444.
- Y. Kobayashi et al., “Present Status of PF-ring and PF-AR in KEK”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC035, pp. 2064-2066.
- K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279.
- F. Pilat, M. Hemmer, V. Ptitsin, S. Tepikian, and D. Trbojevic, “Processing and Analysis of the Measured Alignment Errors for RHIC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCL5, pp. 37-39.
- R. Averill et al., “Performance of the CEA as an e+e- Storage Ring”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 813-816.
- K. Breymayer et al., “SLAC Control Room Consolidation Using Linked Computers”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 409-412.
- E. Bjorklund, “Toward a General Theory of Control Knobs”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP071, pp. XX-XX.
- S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356.
- V. Chouhan et al., “Study of the Surface and Performance of Single-Cell Nb Cavities After Vertical EP Using Ninja Cathodes”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 217-219.
- S. V. Benson et al., “Kilowatt Lasing in a Free-Electron Laser”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A19, pp. 764-766.
- B. P. Xiao et al., “HOM Consideration of 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 528-531.
- N. Solyak et al., “Lorentz Force Detuning Compensation Studies for Long Pulses in ILC type SRF Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB077, pp. 354-356.
- H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3428-3430.
- K. Kawase et al., “High Power Operation of the THz FEL at ISIR, Osaka University”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP073, pp. 528-531.
- J. N. Li, W. Q. Chen, F. Guo, and W. Jia, “A Low Jitter Pulse Generator Based on Two-stage Storage Module”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA023, pp. 711-713.
- J. Branlard et al., “LLRF Automation for the 9mA ILC Tests at FLASH”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB085, pp. 1023-1025.
- M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 348-350.
- G. Y. Hsiung et al., “Operation Experiences of the SRRC 1.3 GeV Electron Storage Ring Vacuum System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2479-2482.
- V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 491-493.
- W. Lavender et al., “The SSRL Injector Beam Position Monitoring Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1151-1154.
- F. Furuta et al., “Status and Challenges of Vertical Electro-Polishing R&D at Cornell”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1115-1118.
- C. C. Kuo et al., “Coupling Correction Study at NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB028, pp. 890-892.
- T. Zaugg, C. Rose, J. D. Schneider, J. Sherman, and R. Stevens Jr, “Operation of a Microwave Proton Source in Pulsed Mode”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4055, pp. 893-895.
- V. Ptitsyn et al., “eRHIC Design Status”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 628-631.
- J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper A203, pp. 25-28.
- L. M. Bollinger et al., “The Argonne Superconducting Heavy-Ion Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B07, pp. 95-101.
- R. Nietuby et al., “Status of PolFEL project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp..
- D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
- D. Teytelman, J. M. Byrd, J. Cao, and J. Yue, “Measurements of Coupled-Bunch Instabilities in BEPC-II”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP069, pp. 4114-4116.
- M. Farkhondeh et al., “Polarized Electron Beams for Nuclear Physics at the MIT Bates Accelerator Center”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE031, unpublished.
- M. Ge et al., “Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 473-475.
- L. Merminga et al., “ELIC: An Electron-Light Ion Collider Based at CEBAF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THAGB001, pp. 203-205.
- K. C. Harkay and Y.-C. Chae, “ERL Staging”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP079, pp. 1272-1274.
- B. Parker, R. B. Palmer, and H. Witte, “The eRHIC Interaction Region Magnets”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3624-3626.
- K. D. Jacobs et al., “Operational Experience with Resonantly Extracted Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH060, pp. 2587-2589.
- R. Averill et al., “Dependence of Phase Instabilities on Bunch Length at the CEA”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 765-768.
- G. Kazakevich, M. Popovic, and R. Johnson, “Studies of operation and control of CW magnetrons for HEP and ADS accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR30, unpublished.
- S. Kwon, M. S. Prokop, and A. Scheinker, “Robust Control of a Two-Input Two-Output (TITO) Multistate Cavity RF System ith Mismatched Uncertainty”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC090, pp. 3494-3496.
- O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and K. J. Wakefield, “NEG-Coated Copper Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 477-479.
- I. Verstovsek, S. Peggs, T. Satogata, C. G. Trahern, and K. Zagar, “ESS Controls Strategy and Control Box Concept”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL026, pp. 183-185.
- Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1574-1576.
- R. Bossart, “Resonant Beam Position Monitor for Low Intensity Ion Beams”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 979-982.
- G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
- A. Vivoli, G. I. Cancelo, B. Chase, N. Solyak, and P. Varghese, “Longitudinal Beam Dynamics and LLRF Requirements for the Project X Pulsed Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUODB2, pp. 439-441.
- A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
- R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 286-291.
- P. C. Rogers, D. Potter, and V. Radeka, “Automatic Gain-Controlled Amplifier for Beam Profile Monitors”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 932-935.
- S. Simrock, J. Fugitt, C. Hovater, and S. Jones, “RF Control System Development at CEFAB”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1885-1888.
- O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and R. R. Swanson, “Discrete Photon Absorbers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 75.
- M. Popovic et al., “Compact CW 1-15 MeV 10-100 kW Electron Accelerators”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB093, unpublished.
- R. Bossart, “High Precision Beam Position Monitor Using a Re-entrant Coaxial Cavity (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-63, pp. 851-853.
- G. Isoyama et al., “Recent Progress in Upgrade of the High-Intensity THz-FEL at Osaka University”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 354-358.
- K. Kawase et al., “Single Picosecond THz Pulse Extraction from the FEL Macropulse using a Laser Activating Semiconductor Reflective Switch”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 430-432.
- J. Spanggaard, F. Arnold Malandain, P. Carriere, L. Ropelewski, and G. Tranquille, “Gas Electron Multipliers for Low Energy Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE061, pp. 1116-1118.
- S. Yamamoto, “Development of Very Short Period Undulators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1735-1739.
- W. Liu, O. H. Rahman, and E. Wang, “High Voltage Design of a 350 kV DC Photogun at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 102-105.
- R. Ito et al., “Construction of Thin-film Coating System Toward the Realization of Superconducting Multilayered Structure”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 445-447.
- S. Kashiwagi et al., “Manipulation and Measurement of Polarization State for THz Coherent Undulator Radiation”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 69-72.
- J. van Zeijts, T. D'Ottavio, B. Frak, and R. Michnoff, “The RHIC Sequencer”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH008, pp. 782-784.
- S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2185-2188.
- J. J. Bisognano et al., “Use of the CEBAF Accelerator for IR and UV Free Electron Lasers”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-68, pp. 507-509.
- A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 85.
- J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481.
- J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1027-1030.
- C. Moir and P. Hughes, “Observation of Self-Steering Effects on the ITS 6-MeV Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W015, pp. 1144-1146.
- J. Flanz, E. Ihloff, R. Averill, and D. Tieger, “Octupole Magnet Design for the 1/2 Integer Resonant Extraction of Electrons from the South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2871-2874.
- E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3134-3136.
- D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2865-2868.
- S. H. Chang et al., “The Comparison of Vacuum Performance in the Undulator Chambers Installed at the Taiwan Light Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA128, pp. 1375-1377.
- C. H. Chang et al., “The Commissioning Results of 1 m Prototype EPU5.6 in SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP33G, pp. 2225-2227.
- C. Moir, “Quadrupole Image-Current Effects in the ITS 6-MeV, 4-kA Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W014, pp. 1141-1143.
- S. Liu, N. Eddy, B. FELLENZ, and A. Semenov, “Development of BPM electronics for PIP-II at Fermilab”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 139-142.
- B. Blind and J. D. Gilpatrick, “LANSCE-Linac Beam-Centroid Jitter in Transverse Phase Space”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS050, pp. 4093-4095.
- B. Blind and A. J. Jason, “Laser Photoionization of H[degree] Beams for Charge-Changing Injection”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2795-2798.
- D. Baros, “Upgrading the Data Acquisition and Control System of the LANSCE LINAC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP256, pp. 588-590.
- Y. Iwashita et al., “Diversified Application of ILC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 502-504.
- S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2865-2868.
- F.-Z. Hsiao et al., “The Liquid Helium Cryogenic System for the Superconducting Cavity in SRRC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH162, pp. 1604-1606.
- M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2868-2871.
- B. Blind, “Generation of a Rectangular Beam Distribution for Irradiation of the Accelerator Production of Tritium Target”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU453, pp. 453-455.
- R. Kinjo, T. Tanaka, A. Kagamihata, T. Seike, and S. Yamamoto, “Development of a Magnetic System to Cancel the Attractive Force toward Structural Reform of Undulators”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP023, pp. 75-79.
- R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
- G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 513-515.
Back to search