JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Nissen, B. Gamage, I. Neththikumara, J. Gubeli, K. Deitrick, and R. Bodenstein, “Final design and first use of in-situ measuring apparatus for measurement of permanent magnet resiliency in CEBAF’s radiation environment”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 759-762. doi:10.18429/JACoW-NAPAC2025-WEP037
[n]	K. W. Jones, “Technological Challenges in the Path to 3.0 MW at the SNS Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 246-250. doi:10.18429/JACoW-NAPAC2016-TUA1IO03
[n]	P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864. 
[n]	J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 179-185. doi:10.18429/JACoW-ICAP2018-TUPAF06
[n]	A. Zholents et al., “Towards Attosecond X-ray Pulses from the FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF072, pp. 482-484. 
[n]	E. V. Valetov and M. Berz, “Main and Fringe Field Computations for the Electrostatic Quadrupoles of the Muon g-2 Experiment Storage Ring”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 313-319. doi:10.18429/JACoW-ICAP2018-TUPAG22
[n]	S. R. Abbott, M. A. Leitner, C. M. Lyneis, C. E. Taylor, and D. C. Wutte, “Status of the Superconducting ECR Ion Source VENUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A01, pp. 1610-1612. 
[n]	P. Bosland, S. Cantacuz?¿ne, J. Gobin, M. Juillard, and J. Martignac, “NbTiN Thin Films for RF Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I45, pp. XX-XX. 
[n]	W. Fawley, R. Briggs, and S. Eylon, “RF Impedance Measurements on the DARHT-II Accelerator Intercell Assembly”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB038, pp. 3098-3100. 
[n]	H. J. Kwon, Y. S. Cho, B. H. Choi, J. M. Han, and K. K. Jeong, “RF Power Delivery System Design and Its Component Characterization for PEFP DTL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB017, pp. 1222-1224. 
[n]	I. H. Yu et al., “The Low Level RF System for 100MV Proton Linac of KOMAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB060, pp. 2857-2859. 
[n]	V. B. Graves et al., “Mercury Handling for the Target System for a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD038, pp. 2594-2596. 
[n]	W. Wan, J. N. Corlett, W. Fawley, and A. Zholents, “Design Study of the Bending Sections between Harmonic Cascade FEL Stages”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF073, pp. 485-487. 
[n]	M. A. Leitner, C. M. Lyneis, and D. Wutte, “The Berkeley 88-Inch Cyclotron Injector System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A02, pp. 1634-1638. 
[n]	G. Penn et al., “Harmonic Cascade FEL Designs for LUX”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF074, pp. 488-490. 
[n]	K. W. Jones, J. L. Erickson, and F. R. Gallegos, “The LANSCE Refurbishment (LANSCE-R) Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS062, pp. 1796-1798. 
[n]	E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1944-1946. doi:10.18429/JACoW-IPAC2015-TUPMA050
[n]	H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n]	P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 179-182. 
[n]	F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n]	N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596. 
[n]	K. Hasegawa, “Progress and Operation Experiences of the J-PARC Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 257-260. doi:10.18429/JACoW-LINAC2016-MOPLR054
[n]	C. M. Lyneis, M. A. Leitner, D. Wutte, C. E. Taylor, and S. R. Abbott, “VENUS: The Next Generation ECR Ion Source”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-1, pp. XX-XX. 
[n]	H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120. 
[n]	D. E. Johnson et al., “The Linac Laser Notcher for the Fermilab Booster”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 710-714. doi:10.18429/JACoW-LINAC2016-TH2A01
[n]	N. Souchlas et al., “Energy Flow and Deposition in a 4-MW Muon Collider Target System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD036, pp. 2588-2590. 
[n]	L. Lin, L. Jahnel, and P. Tavares, “A Magnet Lattice for the LNLSUV Synchrotron Light Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1402-1405. 
[n]	M. S. Zolotorev, E. D. Commins, J. W. ONeill, F. Sannibale, A. S. Tremsin, and W. Wan, “First Experimental Results from DEGAS, the Quantum Limited Brightness Electron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBG04, pp. 1918-1920. 
[n]	M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886. 
[n]	F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054. 
[n]	F. Furuta et al., “Advanced Vertical Electro-Polishing studies at Cornell with Faraday”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 233-236. doi:10.18429/JACoW-LINAC2016-MOPLR047
[n]	C. Wiesner et al., “Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2418-2421. doi:10.18429/JACoW-IPAC2019-WEPMP040
[n]	D. S. Robin et al., “Successful Completion of the ALS Superbend Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUALA002, pp. 215-217. 
[n]	F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 579-582. 
[n]	C. C. Liang et al., “Characterization of the THz Radiation-Based Bunch Length Measurement System for the NSRRC Photoinjector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4080-4082. doi:10.18429/JACoW-IPAC2017-THPAB149
[n]	A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549. 
[n]	J. M. Han et al., “Design of the KOMAC H$$/H$-$ RFQ Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4005, pp. 774-776. 
[n]	K. Beckert et al., “Fast Stochastic Cooling of Heavy Ions at the ESR Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A09, pp. 1262-1264. 
[n]	S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 229-231. doi:10.18429/JACoW-NAPAC2016-MOPOB71
[n]	J. Pozimski, R. D, A. Jakob, P. Gro, and H. Klein, “Gabor-Plasma Lens Focusing for LEBT Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P007, pp. 174-176. 
[n]	D. Wutte, D. J. Clark, B. Laune, M. A. Leitner, and C. M. Lyneis, “High Intensity Ion Beam Iinjection Into the 88-Inch Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-6, pp. XX-XX. 
[n]	D. G. Kim, H.-C. Bhang, and J.-W. Kim, “Beam Emittance Measurement in the Injection Beam Line for a Cyclotron Accelerator Mass Spectrometer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS045, pp. 3523-3525. 
[n]	M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX. 
[n]	R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2514-2517. doi:10.18429/JACoW-IPAC2019-WEPGW021
[n]	W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925. 
[n]	S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 22, pp. 37-40. 
[n]	R. J. Weggel, V. B. Graves, H. G. Kirk, and K. T. McDonald, “Magnet Design for the Target System of a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3976-3978. doi:10.18429/JACoW-IPAC2014-THPRI087
[n]	S. Eylon, E. Henestroza, M. Vella, S. S. Yu, and C. Ekdahl, “Electron Beam, 3.5MV, 2kA Injector Diode Diagnostics for the DARHT Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH126, pp. 2380-2382. 
[n]	S. Matthies, H. Br?ñuning, A. Schwinn, and S. Deghaye, “FESA3 Integration in GSI for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO006, pp. 43-45. 
[n]	W. Y. Lin, B. Y. Chen, C. S. Huang, C. H. Kuo, and T. Y. Lee, “Control System Studio to Monitor Front End and Beamlines Status as well as Light Source Stability”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2687-2689. doi:10.18429/JACoW-IPAC2019-WEPGW087
[n]	C. Matthews et al., “Exploring causes of Beam Loss at CEBAF”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6381, unpublished. 
[n]	P. Mandrillon et al., “Recent Activities of the Cyclotron Laboratory in Nice”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VI-05, pp. 248-251. 
[n]	M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n]	S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20. 
[n]	D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3619-3622. doi:10.18429/JACoW-IPAC2018-THPAL005
[n]	D. Khan et al., “FFA@CEBAF beam transport error and tolerance simulation studies”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC84, unpublished. 
[n]	N. Tsoupas, A. Kayran, V. Litvinenko, and W. W. MacKay, “Uncoupled Achromatic Tilted S-bend”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC042, pp. 3071-3073. 
[n]	T. J. Loew, S. R. Abbott, M. L. Galloway, D. Leitner, and C. M. Lyneis, “Design of a High Temperature Oven for an ECR Source for the Production of Uranium Ion Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS044, pp. 1742-1744. 
[n]	D. E. Johnson et al., “MEBT Laser Notcher (Chopper) for Booster Loss Reduction”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 416-421. doi:10.18429/JACoW-HB2018-THP1WC01
[n]	Y. W. Kang and S. W. Lee, “Modeling and Simulation of RFQs for Analysis of Fields and Frequency Deviations with Respect to Internal Dimensional Errors”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 810-812. doi:10.18429/JACoW-NAPAC2016-WEPOA52
[n]	C. B. Shim et al., “High Power Test of PEFP RFQ”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21006, pp. XX-XX. 
[n]	K. W. Jones and J. D. Gilpatrick, “Looking Beyond LANSCE: The MaRIE Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOKNB02, pp. 21-21. 
[n]	Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC  DTL”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94. 
[n]	C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105. 
[n]	K. Unser, “Beam Current Transformer with DC to 200 MHz Range”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 934-939. 
[n]	P. Mandrillon et al., “Progress of the Feasibility Studies of the European Light Ion  Medical Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1790-1793. 
[n]	J. M. Han et al., “Development of a Low-Energy Proton Accelerator System for the Proton Engineering Frontier Project (PEFP)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB048, pp. 2832-2834. 
[n]	R. Grewe et al., “In-Situ Quality Factor Measurements of SRF Cavities at S-DALINAC”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 70-74. doi:10.18429/JACoW-SRF2023-MOPMB008
[n]	A. Jakob, K. Reidelbach, J. Pozimski, R. D, and H. Klein, “Diagnostic of the Compensation Process of Ion Beams with a Time-Resolving Ion Energy Spectrometer”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P016, pp. 246-248. 
[n]	V. P. Busygin, A. V. Koltsov, and V. G. Kurakin, “Adjustable Computer Interface for Measurements and Control”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1A11, pp. 1847-1849. 
[n]	K. A. Belovintsev et al., “The Radiation Complex for Fundamental Reserach”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 861-864. 
[n]	R. J. Weggel et al., “Shielding of Superconducting Coils for a 4-MW Muon-Collider Target System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD037, pp. 2591-2593. 
[n]	L. Lin and L. Jahnel, “The Dynamic Aperture of the LNLS UVX2 Electron Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 673-676. 
[n]	A. D. Walker and E. L. Kerstiens, “1L Target Harp Diagnostic Display Tool”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 99-101. doi:10.18429/JACoW-IBIC2023-MOP033
[n]	J. L. Crisp et al., “Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC20, pp. 1187-1189. 
[n]	N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 964-967. 
[n]	M. Vella and S. Nelson, “RF Cell Modeling and Experiments for Wakefield Minimization in DARHT-II”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB09, pp. 452-454. 
[n]	V. Litvinenko et al., “Progress with FEL-based Coherent Electron Cooling”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THDAU05, pp. 529-532. 
[n]	H. Bursali et al., “Impedance reduction of the beam gas ionization monitors for the CERN SPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3128-3131. doi:10.18429/JACoW-IPAC2024-THPC54
[n]	A. V. Serov and A. V. Koltsov, “Transition Radiation Detector which Used Dihedral Angle as Radiator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA033, pp. 113-115. 
[n]	D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2057-2060. 
[n]	D. P. Brodrick et al., “Motion Control System for the European Spallation Source Target Wheel”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 717-721. doi:10.18429/JACoW-ICALEPCS2017-TUPHA129
[n]	M. A. Leitner, C. M. Lyneis, and D. C. Wutte, “Design of the Extraction System of the Superconducting ECR Ion Source VENUS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPB004, pp. 67-69. 
[n]	V. G. Kurakin and P. V. Kurakin, “Non Linear Cumulative Interaction and Halo Heating in Multi Cavity Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1A12, pp. 1306-1308. 
[n]	Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814. 
[n]	J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908. 
[n]	W. S. Graves et al., “X-Ray Laser Seeding for Short Pulses and Narrow Bandwidth”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB066, pp. 959-961. 
[n]	J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125. 
[n]	N. A. Galyaev, Y. A. Chesnokov, V. I. Kotov, S. V. Tsarik, and V. N. Zapol, “Bent Single Crystals to Form High Energy Particle Beams”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 192-195. 
[n]	J. M. Han et al., “Design of a 350 MHz, CW RFQ for the KOMAC Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D007, pp. 89-91. 
[n]	G. Stover and K. Fowler, “Operating Results for the Beam Profile Monitor System Currently in Use at Bevalac Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 622-625. 
[n]	P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1647-1650. 
[n]	M. A. Leitner et al., “High-Current, High-Duty-Factor Experiments with the H- Ion Source for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA13, pp. 1911-1913. 
[n]	T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 352-354. doi:10.18429/JACoW-NAPAC2016-TUPOA30
[n]	V. G. Kurakin and A. V. Koltsov, “ECOLOGICALLY CLEAN ACCELERATOR FOR NUCLEAR PHYSICS RESEARCH”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THCPH05, pp. XX-XX. 
[n]	D. Trbojevic et al., “Lattice Design for the ERL Electron Ion Collider in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA028, pp. 127-129. 
[n]	J. Y. Huang, M. Kwon, H. J. Park, M. K. Park, M. Yoon, and I. H. Yu, “Instability Studies of the Pohang Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP101G, pp. 1096-1098. 
[n]	S. S. Chang, J. Y. Huang, M. Kwon, M. K. Park, and M. Yoon, “Tune Measurement and Beam Damping System for PLS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP080L, pp. 1914-1916. 
[n]	V. Ptitsyn et al., “ERHIC Conceptual Design”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGE01, pp. 388-391. 
[n]	E. Nissen, B. Gamage, J. Gubeli, K. Deitrick, and R. Bodenstein, “Design and instrumentation for permanent magnet samples exposed to a radiation environment”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3879-3881. doi:10.18429/JACoW-IPAC2024-THPS59
[n]	V. G. Kurakin, A. V. Koltsov, and P. V. Kurakin, “Flexible User Interface for Computer Measurements and Control”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH305, pp. 1192-1194. 
[n]	T. W. Hardek et al., “Status of the Oak Ridge Spallation Neutron Source (SNS) RF Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOAS3, pp. 2050-2052. 
[n]	T. Conrad et al., “Cavity Designs for the CH3 to CH11 of the Superconducting Heavy Ion Accelerator HELIAC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 15. doi:10.18429/JACoW-SRF2021-SUPCAV006
[n]	B. Bogdanovich, V. Kudinov, S. Minaev, A. Nesterovich, and Yu. Pomazan, “Beam Dynamics in the Output System of Linac with Special Target Forming  Bremsstrahlung Flow with Small Divergence”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A03, pp. 2231-2233. 
[n]	A. V. Serov, A. V. Koltsov, and I. A. Mamonov, “Experimental Study of the Scattering of 7.4 Mev Electrons Intersecting a Foil at an angle of 5ÔÇô60 degree to its Surface”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC36, pp. 401-403. 
[n]	H. Herman and J. A. O, “Cryopumping Tests for the Indiana University 200 MeV Cyclotron Beam Line”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 419-424. 
[n]	A. Ratti et al., “Design of an RFQ-Based Neutron Source for Cargo Container Interrogation”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP005, pp. 253-255. 
[n]	M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523. 
[n]	M. K. Park et al., “Increasing Threshold Beam Current by Bunch Filling Pattern”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A07, pp. 1139-1141. 
[n]	D. Kostin, W.-D. Moeller, and W. Kaabi, “Update on the European XFEL RF Power Input Coupler”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP058, pp. 1047-1050. 
[n]	V. M. Biryukov et al., “High Energy Beam Line Based on Bending Crystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR20, pp. 1948-1948. 
[n]	V. I. Kotov et al., “First Results on Study of Optimal Crystal Extraction at 70 GeV IHEP Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP27C, pp. 2114-2116. 
[n]	P. K. Roy et al., “Initial Results on Neutralized Drift Compression Experiments (NDCX-IA) for High Intensity Ion Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE071, pp. 3856-3858. 
[n]	V. G. Kurakin and P. V. Kurakin, “Charged Beams Optical Properties of Scattering Media”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 522-524. doi:10.18429/JACoW-RUPAC2016-WEPSB071
[n]	R. M. Thurman-Keup et al., “Installation Status of the Electron Beam Profiler for the Fermilab Main Injector”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 535-539. doi:10.18429/JACoW-IBIC2015-TUPB077
[n]	J. L. Erickson and R. W. Garnett, “Status of the Los Alamos Multi-Probe Facility for Matter-Radiation Interactions in Extremes”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 464-468. doi:10.18429/JACoW-NAPAC2016-TUB4IO01
[n]	E. V. Valetov, “Beamline Design and Optimisation for High Intensity Muon Beams at PSI”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 523-526. doi:10.18429/JACoW-IPAC2022-MOPOTK033
[n]	H. J. Kwon, Y. S. Cho, Y. H. Kim, M. Y. Park, K. T. Seol, and C. B. Shim, “Operation of the High Power RF System for PEFP RFQ”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21005, pp. XX-XX. 
[n]	R. Briggs, L. L. Reginato, M. Vella, S. Nelson, and D. Birx, “Transverse Impedance Measurements of the DARHT-2 Accelerator Cell”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH079, pp. 1850-1852. 
[n]	D. Rees, J. L. Erickson, R. W. Garnett, J. T. M. Lyles, and L. Rybarcyk, “LANSCE RF System Improvements for Current and Future Programs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC068, pp. 238-240. 
[n]	P. Bowe, S. P. M?©ller, J. S. Nielsen, and U. V. Pedersen, “Intensity Limitations of the Electrostatic Storage Ring ELISA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B03, pp. 788-790. 
[n]	L. Lin, L. Jahnel, and P. Tavares, “The LNLS UVX2 Soft X-ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 450-453. 
[n]	S. K. Mukherjee et al., “Mechanical Design of the Prototype H- Ion Source for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA14, pp. 1914-1916. 
[n]	A. Villa, A. Egurrola Areta, J. Feuchtwanger, P. Usabiaga, I. Arredondo, and J. M. Seara Eizaguirre, “Electromagnetic Simulations and Particle Tracking of a Compact 750 MHz IH DTL Accelerating Cavity”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4029, unpublished. 
[n]	Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1269-1272. 
[n]	S. Yu, E. Henestroza, S. Eylon, and M. Vella, “Electron Beam 3.5MV, 2ka Injector Diode Diagnostics for the DARHT Facility”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB06, pp. 443-445. 
[n]	M. Yoon, J. Y. Huang, J. S. Jang, M. Kwon, T. Lee, and S. H. Nam, “Commissioning of the PLS 2 GeV Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG06, pp. 171-173. 
[n]	A. Brauch et al., “Status of the new bunch length measurement system downstream of the injector of the S-DALINAC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2415-2417. doi:10.18429/JACoW-IPAC2024-WEPG84
[n]	S. Nelson, “Developing a Toolkit for Analysis of LCLS Pump-Probe Data”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 796. doi:10.18429/JACoW-ICALEPCS2019-TUCPR01
[n]	K. Iliakis, B. E. Karlsen-Bæck, G. Trad, H. Timko, M. Zampetakis, and T. Argyropoulos, “Machine learning-based extraction of longitudinal beam parameters in the LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1794-1797. doi:10.18429/JACoW-IPAC2024-TUPS56
[n]	R. Briggs, “Dan Birx Memorial Session”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper WE100, pp. 657-657. 
[n]	M. Apollonio, A. Vorozhtsov, P. Tavares, A. Andersson, and J. Breunlin, “First results of the multipole injection kicker in the MAX IV 1.5 GeV ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 994-997. doi:10.18429/JACoW-IPAC2023-MOPM011
[n]	R. Bodenstein et al., “Status update of permanent magnet radiation resiliency studies at CEBAF”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7370, unpublished. 
[n]	W. Broome, R. Biscardi, J. Keane, P. Mortazavi, M. Thomas, and J. M. Wang, “RF System for the NSLS Coherent Infrared Radiation Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP06, pp. 1626-1628. 
[n]	J. A. Uythoven et al., “Commissioning of the LHC Beam Transfer Line TI 8”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP015, pp. 1461-1463. 
[n]	J. L. Erickson, K. W. Jones, and M. W. Strevell, “Status of the LANSCE Refurbishment Project”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP014, pp. 85-87. 
[n]	J. L. Erickson, K. W. Jones, R. W. Garnett, and M. S. Gulley, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP025, pp. 452-454. 
[n]	D. Khan, A. Bogacz, D. Trbojevic, and R. Bodenstein, “Exploratory splitter bend system designs for FFA@CEBAF”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3079-3081. doi:10.18429/JACoW-IPAC2024-THPC38

For LaTeX

Use Complete Form

For BibTeX

References

Back to search