Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Rossi and M. Ferianis, “Installation and Commissioning of the Pulsed Optical Timing System Extension”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 451-454. doi:10.18429/JACoW-IBIC2022-WEP25
[n] L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686.
[n] J. Norem and M. Pellin, “Gradient Limits and SCRF Performance”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP08, pp. XX-XX.
[n] P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
[n] M. Jenkins, J. Ollier, J. Burke, and M. Procter, “The X-ray imaging laboratory: a radiation test facility for validating industrial linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3684-3686. doi:10.18429/JACoW-IPAC2024-THPR72
[n] H. X. Deng and Z. M. Dai, “Study of Short Seed Pulse Effects in High Gain Harmonic Generation Free Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH033, pp. 59-62.
[n] M. E. Read, L. Ives, G. Miram, A. Mizuhara, and L. Song, “Development of a 19KW, CW, L-Band Klystron for the Continuous Electron Beam Accelerator Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE028, pp. 1142-1143.
[n] P. H. Baeta Neves Diniz Santos, B. Keil, and G. Marinkovic, “RF System-on-Chip for Multi-Bunch and Filling-Pattern Feedbacks”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 379-382. doi:10.18429/JACoW-IBIC2022-WE2C4
[n] Z. Mi et al., “Design and test of double spoke superconducting cavity tuner for CSNS-II”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 81-83. doi:10.18429/JACoW-LINAC2024-MOPB021
[n] G. Lopez, “Quench Simulations of the 40 mm Aperture SSC-Quadrupole Magnet Connected in Series with 50 mm Aperture SSC-Dipole Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2784-2787.
[n] G. Petringa and G. A. P. Cirrone, “Acceleration, Transport and Diagnostic of Protons from Laser-Matter Interaction”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper TU2I4, unpublished.
[n] R. L. Geng et al., “Latest Results of ILC High-Gradient R&D 9-cell Cavities at JLAB”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP28, pp. 525-529.
[n] M. J. P. Adam and C. Bodnarchuk, “Combined Fixed Mask, Photon Shutter, Safety Shutter, and Collimator Design for BXDS IVU at the CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 309-311. doi:10.18429/JACoW-MEDSI2016-WEPE01
[n] L. Ives, P. Ferguson, D. Marsden, G. Miram, M. Mizuhara, and L. Song, “Design of an X-band, 50Mw, Multiple Beam Klystron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE015, pp. 1110-1112.
[n] C. Antoine, “RF Material Investigation by Sample Analysis”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D12, pp. 899-910.
[n] R. Silwal et al., “Spectroscopy of Co-Like Highly Charged Ions with the NIST EBIT Complementing the Study of QED and Higher Order Effects”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR1WH02, unpublished.
[n] J. Herranz, I. Bustinduy, P. Forck, A. Navarro Fernandez, ?ü. Rodr?¡guez P?íramo, and T. Sieber, “Electron Emission (SEM) Grids for the FAIR Proton Linac”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 426-429. doi:10.18429/JACoW-IBIC2022-WEP17
[n] J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB072, unpublished.
[n] G. Chiozzi, L. Andolfato, R. Karban, and A. Tejeda, “A UML Profile for Code Generation of Component Based Distributed Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS032, pp. 867-870.
[n] H. Tanaka, T. Ishikawa, S. Goto, S. Takano, T. Watanabe, and M. Yabashi, “SPring-8 Upgrade Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2867-2870. doi:10.18429/JACoW-IPAC2016-WEPOW019
[n] M. Ojeda Sandon?¡s et al., “Processing High-Bandwidth Bunch-by-Bunch Observation Data from the RF and Transverse Damper Systems of the LHC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 841-844. doi:10.18429/JACoW-ICALEPCS2015-WEPGF062
For LaTeX
Use Complete Form
For BibTeX
References
- F. Rossi and M. Ferianis, “Installation and Commissioning of the Pulsed Optical Timing System Extension”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 451-454.
- L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686.
- J. Norem and M. Pellin, “Gradient Limits and SCRF Performance”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP08, pp. XX-XX.
- P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
- M. Jenkins, J. Ollier, J. Burke, and M. Procter, “The X-ray imaging laboratory: a radiation test facility for validating industrial linacs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR72, pp. 3684-3686.
- H. X. Deng and Z. M. Dai, “Study of Short Seed Pulse Effects in High Gain Harmonic Generation Free Electron Laser”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH033, pp. 59-62.
- M. E. Read, L. Ives, G. Miram, A. Mizuhara, and L. Song, “Development of a 19KW, CW, L-Band Klystron for the Continuous Electron Beam Accelerator Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE028, pp. 1142-1143.
- P. H. Baeta Neves Diniz Santos, B. Keil, and G. Marinkovic, “RF System-on-Chip for Multi-Bunch and Filling-Pattern Feedbacks”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 379-382.
- Z. Mi et al., “Design and test of double spoke superconducting cavity tuner for CSNS-II”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 81-83.
- G. Lopez, “Quench Simulations of the 40 mm Aperture SSC-Quadrupole Magnet Connected in Series with 50 mm Aperture SSC-Dipole Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2784-2787.
- G. Petringa and G. A. P. Cirrone, “Acceleration, Transport and Diagnostic of Protons from Laser-Matter Interaction”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper TU2I4, unpublished.
- R. L. Geng et al., “Latest Results of ILC High-Gradient R&D 9-cell Cavities at JLAB”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP28, pp. 525-529.
- M. J. P. Adam and C. Bodnarchuk, “Combined Fixed Mask, Photon Shutter, Safety Shutter, and Collimator Design for BXDS IVU at the CLS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 309-311.
- L. Ives, P. Ferguson, D. Marsden, G. Miram, M. Mizuhara, and L. Song, “Design of an X-band, 50Mw, Multiple Beam Klystron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE015, pp. 1110-1112.
- C. Antoine, “RF Material Investigation by Sample Analysis”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D12, pp. 899-910.
- R. Silwal et al., “Spectroscopy of Co-Like Highly Charged Ions with the NIST EBIT Complementing the Study of QED and Higher Order Effects”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR1WH02, unpublished.
- J. Herranz, I. Bustinduy, P. Forck, A. Navarro Fernandez, ?ü. Rodr?¡guez P?íramo, and T. Sieber, “Electron Emission (SEM) Grids for the FAIR Proton Linac”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 426-429.
- J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB072, unpublished.
- G. Chiozzi, L. Andolfato, R. Karban, and A. Tejeda, “A UML Profile for Code Generation of Component Based Distributed Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS032, pp. 867-870.
- H. Tanaka, T. Ishikawa, S. Goto, S. Takano, T. Watanabe, and M. Yabashi, “SPring-8 Upgrade Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2867-2870.
- M. Ojeda Sandon?¡s et al., “Processing High-Bandwidth Bunch-by-Bunch Observation Data from the RF and Transverse Damper Systems of the LHC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 841-844.
Back to search