Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Rescic and Z. Kroflic, “CCCP - Cosylab common control platform”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL031, pp. 88-90.
[n] T. Honma et al., “Present Status of HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
[n] A. Vivoli, “PIP-II Transfer Lines Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1161-1163. doi:10.18429/JACoW-NAPAC2016-THPOA29
[n] W. Brefeld et al., “Acceleration of Polarized Electronics in the 2.5 GeV Synchrotron at Bonn”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3146-3149.
[n] H. Hayano and E. Ezura, “The RF Reference Line for TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1663-1666.
[n] G. P. Lawrence, “High-power Proton Linac for Transmuting the Long-lived Fission Products in Nuclear Waste”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2598-2601.
[n] P. Emma, C. Behrens, and H. Loos, “Fast, Absolute Bunch Length Measurements in a Linac using an Improved RF-phasing Method”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD30, pp. 602-605.
[n] J. Bahrdt, W. Frentrup, A. Gaupp, and M. Scheer, “Universal Mode Operation of the BESSY II UE112 APPLE Undulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP030, pp. 1162-1164.
[n] C. Fischer Geneva, “Ionisation losses and wire scanner heating: evaluation, possible solutions, application to the LHC.”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS10, pp. XX-XX.
[n] M. Giannella and G. W. Dodson, “The SNS Central Control Room, Design, and Operational Experience”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB30, pp. XX-XX.
[n] D. M. Dykes and J. N. Galayda, “Correlator Filters for Feedback at SRS and NSLS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 582-585.
[n] A. V. Shemyakin and C. M. Baffes, “High Power Density Test of PXIE MEBT Absorber Prototype”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP055, pp. 973-975.
[n] J. L. Adamski, W. J. Gallagher, R. C. Kennedy, and A. D. Yeremian, “A High Current Injector for the Boeing Radiation Laboratory FEL Experiment”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2696-2699.
[n] S. Hunt, “An Integrated Environment for Control System Development”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP711, pp. XX-XX.
[n] F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX.
[n] P. Kolb, R. E. Laxdal, Y. Ma, Z. Y. Yao, and V. Zvyagintsev, “HOM Measurements on the ARIEL eLINAC Cryomodules”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB088, pp. 347-349.
[n] D. R. Struthers, “Automatic Control of the Trim-Coil Power Supplies at the Berkeley 88-Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-008, pp. XX-XX.
[n] S. Martin and W. Planner, “Accelerator Design Parameterd for a European Pulsed Spallation Neutron Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 435-438.
[n] S. M. Polozov, T. V. Bondarenko, and Y. A. Bashmakov, “RF Photoinjector and Radiating Structure for High-power THz Radiation Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB074, pp. 1005-1007.
[n] L. Popielarski et al., “Testing of Copper Plating Quality on ReA3 Coupler Bellows and Approach to Improved Plating for FRIB Production”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP067, pp. 1077-1080.
[n] R. Prazeres, F. Glotin, and J. M. Ortega, “Measurement and Calculation of the 'Electron Efficiency' on the `CLIO' Free-Electron Laser”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS06, pp. XX-XX.
[n] A. Chabert, “What could be a Radioactive Ion Beam Facility at GANIL”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 412-415.
[n] M. Caron et al., “Influence of Beam-Breakup Instabilities on Electron Focusing”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH003, pp. 0-3645.
[n] Danilov S. V. et al., “Novosibirsk Phi-Factory Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D069, pp. 257-259.
[n] R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
[n] N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
[n] P. Castro, “Orbit Correction by Dispersion Minimization in an Undulator with Superimposed FODO Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP12F, pp. 658-660.
[n] D. C. Carey, R. J. Stefanski, and L. C. Teng, “Wide Band Neutrino Beams with Quadrupole Focusing”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 755-759.
[n] J. R. Delayen, “RF Properties of Superconducting Pb Electroplated onto Cu”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E02, pp. XX-XX.
[n] G. Jackson, “Measurement of the Resistive Wall Instability in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1755-1758.
[n] M. L. Mallory and E. D. Hudson, “A Rotatable Cold Cathode Penning Ion Source”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1669-1672.
[n] M. Dehler and D. Bulfone, “Orbit Feedbacks for Synchrotron Light Sources”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper DS01, pp. XX-XX.
[n] M. Pekeler, “SRF in Storage Rings”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOA05, pp. 98-103.
[n] J. P. Koutchouk, “Statistical Estimate and Correction of the LEP Optics Imperfections”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1322-1325.
[n] Yu. N. Denisov, “Complex of Systems for Measuring the Characteristics and Stabilization of Static Magnetic Fields”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 482-487.
[n] C. H. Wang, L. F. Li, X. L. Wang, and C. P. Chu, “IoT Application in the Control System of the BEPCII Power Supplies”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 302-304. doi:10.18429/JACoW-NAPAC2016-TUPOA07
For LaTeX
Use Complete Form
For BibTeX
References
- M. Rescic and Z. Kroflic, “CCCP - Cosylab common control platform”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL031, pp. 88-90.
- T. Honma et al., “Present Status of HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
- A. Vivoli, “PIP-II Transfer Lines Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1161-1163.
- W. Brefeld et al., “Acceleration of Polarized Electronics in the 2.5 GeV Synchrotron at Bonn”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3146-3149.
- H. Hayano and E. Ezura, “The RF Reference Line for TRISTAN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1663-1666.
- G. P. Lawrence, “High-power Proton Linac for Transmuting the Long-lived Fission Products in Nuclear Waste”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2598-2601.
- P. Emma, C. Behrens, and H. Loos, “Fast, Absolute Bunch Length Measurements in a Linac using an Improved RF-phasing Method”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD30, pp. 602-605.
- J. Bahrdt, W. Frentrup, A. Gaupp, and M. Scheer, “Universal Mode Operation of the BESSY II UE112 APPLE Undulator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP030, pp. 1162-1164.
- C. Fischer Geneva, “Ionisation losses and wire scanner heating: evaluation, possible solutions, application to the LHC.”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS10, pp. XX-XX.
- M. Giannella and G. W. Dodson, “The SNS Central Control Room, Design, and Operational Experience”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB30, pp. XX-XX.
- D. M. Dykes and J. N. Galayda, “Correlator Filters for Feedback at SRS and NSLS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 582-585.
- A. V. Shemyakin and C. M. Baffes, “High Power Density Test of PXIE MEBT Absorber Prototype”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP055, pp. 973-975.
- J. L. Adamski, W. J. Gallagher, R. C. Kennedy, and A. D. Yeremian, “A High Current Injector for the Boeing Radiation Laboratory FEL Experiment”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2696-2699.
- S. Hunt, “An Integrated Environment for Control System Development”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP711, pp. XX-XX.
- F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX.
- P. Kolb, R. E. Laxdal, Y. Ma, Z. Y. Yao, and V. Zvyagintsev, “HOM Measurements on the ARIEL eLINAC Cryomodules”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB088, pp. 347-349.
- D. R. Struthers, “Automatic Control of the Trim-Coil Power Supplies at the Berkeley 88-Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-008, pp. XX-XX.
- S. Martin and W. Planner, “Accelerator Design Parameterd for a European Pulsed Spallation Neutron Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 435-438.
- S. M. Polozov, T. V. Bondarenko, and Y. A. Bashmakov, “RF Photoinjector and Radiating Structure for High-power THz Radiation Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB074, pp. 1005-1007.
- L. Popielarski et al., “Testing of Copper Plating Quality on ReA3 Coupler Bellows and Approach to Improved Plating for FRIB Production”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP067, pp. 1077-1080.
- R. Prazeres, F. Glotin, and J. M. Ortega, “Measurement and Calculation of the 'Electron Efficiency' on the `CLIO' Free-Electron Laser”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS06, pp. XX-XX.
- A. Chabert, “What could be a Radioactive Ion Beam Facility at GANIL”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 412-415.
- M. Caron et al., “Influence of Beam-Breakup Instabilities on Electron Focusing”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH003, pp. 0-3645.
- Danilov S. V. et al., “Novosibirsk Phi-Factory Project”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D069, pp. 257-259.
- R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
- N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
- P. Castro, “Orbit Correction by Dispersion Minimization in an Undulator with Superimposed FODO Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP12F, pp. 658-660.
- D. C. Carey, R. J. Stefanski, and L. C. Teng, “Wide Band Neutrino Beams with Quadrupole Focusing”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 755-759.
- J. R. Delayen, “RF Properties of Superconducting Pb Electroplated onto Cu”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E02, pp. XX-XX.
- G. Jackson, “Measurement of the Resistive Wall Instability in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1755-1758.
- M. L. Mallory and E. D. Hudson, “A Rotatable Cold Cathode Penning Ion Source”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1669-1672.
- M. Dehler and D. Bulfone, “Orbit Feedbacks for Synchrotron Light Sources”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper DS01, pp. XX-XX.
- M. Pekeler, “SRF in Storage Rings”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOA05, pp. 98-103.
- J. P. Koutchouk, “Statistical Estimate and Correction of the LEP Optics Imperfections”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1322-1325.
- Yu. N. Denisov, “Complex of Systems for Measuring the Characteristics and Stabilization of Static Magnetic Fields”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 482-487.
- C. H. Wang, L. F. Li, X. L. Wang, and C. P. Chu, “IoT Application in the Control System of the BEPCII Power Supplies”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 302-304.
Back to search