Favourites
For Word
[n] Zh. X. Tang, G. Feng, and B. F. Wei, “Preliminary Study of Femtosecond Electron Source Based on THz Acceleration and Field Emission”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4048-4049. doi:10.18429/JACoW-IPAC2021-THPAB146
[n] Zh. X. Tang, “Preliminary Study of 500 MHz HOM-Free RF Cavity”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4050-4052. doi:10.18429/JACoW-IPAC2021-THPAB147
[n] Z. Yang et al., “Transverse Profile Expansion and Homogenization for the Beamline of XIPAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1346-1348. doi:10.18429/JACoW-IPAC2016-TUPMR042
[n] C. Yao et al., “High Charge Development of the APS Injector for an MBA Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1828-1830. doi:10.18429/JACoW-IPAC2015-TUPJE079
[n] A. Loulergue, M.-E. Couprie, M. Khojoyan, M. Labat, W. Wang, and C. Evain, “Electron Beam Transfer Line for Demonstration of Laser Plasma Based Free Electron Laser Amplification”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2489-2491. doi:10.18429/JACoW-IPAC2015-WEPWA001
[n] R. P. Wells, J. Corlett, and A. Zholents, “Re-Circulating Linac Vacuum System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE031, pp. 812-814.
[n] M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
[n] H. F. Miao, W. Li, Y. J. Liu, and L. R. Shen, “Implementation of the SSRF Vacuum Control System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP148, pp. 3714-3716.
[n] Y. Sun and H. Shang, “Preliminary Experimental Investigation of Quasi Achromat Scheme at Advanced Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1800-1802. doi:10.18429/JACoW-IPAC2015-TUPJE070
[n] K. N. Li et al., “Design and Development of the Control System for a Compact Carbon-14 AMS Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 722-723. doi:10.18429/JACoW-ICALEPCS2017-TUPHA130
[n] F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
[n] G. Liu, C. Diao, J. Y. Li, W. Li, and Y. Wang, “Vacuum Monitoring System of HLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH019, pp. 811-812.
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066.
[n] M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523.
[n] L. Bertolini et al., “Interaction Region Design at the PEP-II B Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP125G, pp. 460-462.
[n] C. Perkins et al., “Vacuum System Design for the PEP-II B Factory High-Energy Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2482-2485.
[n] Y. Li et al., “Application of Programmable Trim Quadrupoles in Beam Commissioning of CSNS/RCS”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 158-161. doi:10.18429/JACoW-HB2023-TUA4C2
For LaTeX
Use Complete Form
For BibTeX
References
- Zh. X. Tang, G. Feng, and B. F. Wei, “Preliminary Study of Femtosecond Electron Source Based on THz Acceleration and Field Emission”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4048-4049.
- Zh. X. Tang, “Preliminary Study of 500 MHz HOM-Free RF Cavity”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4050-4052.
- Z. Yang et al., “Transverse Profile Expansion and Homogenization for the Beamline of XIPAF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1346-1348.
- C. Yao et al., “High Charge Development of the APS Injector for an MBA Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1828-1830.
- A. Loulergue, M.-E. Couprie, M. Khojoyan, M. Labat, W. Wang, and C. Evain, “Electron Beam Transfer Line for Demonstration of Laser Plasma Based Free Electron Laser Amplification”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2489-2491.
- R. P. Wells, J. Corlett, and A. Zholents, “Re-Circulating Linac Vacuum System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE031, pp. 812-814.
- M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
- H. F. Miao, W. Li, Y. J. Liu, and L. R. Shen, “Implementation of the SSRF Vacuum Control System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP148, pp. 3714-3716.
- Y. Sun and H. Shang, “Preliminary Experimental Investigation of Quasi Achromat Scheme at Advanced Photon Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1800-1802.
- K. N. Li et al., “Design and Development of the Control System for a Compact Carbon-14 AMS Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 722-723.
- F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
- G. Liu, C. Diao, J. Y. Li, W. Li, and Y. Wang, “Vacuum Monitoring System of HLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH019, pp. 811-812.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066.
- M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2520-2523.
- L. Bertolini et al., “Interaction Region Design at the PEP-II B Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP125G, pp. 460-462.
- C. Perkins et al., “Vacuum System Design for the PEP-II B Factory High-Energy Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2482-2485.
- Y. Li et al., “Application of Programmable Trim Quadrupoles in Beam Commissioning of CSNS/RCS”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA4C2, pp. 158-161.
Back to search