Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
[n] T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
[n] D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
[n] R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3710-3714.
[n] R. J. Lipton, “Radiation Damage in Detectors and Electronics”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUIOTIO02, pp. 75-79.
[n] V. Kiselev, E. Levichev, I. Protopopov, V. Sajaev, and V. V. Smaluk, “Non-Linear Beam Dynamics Experiments at VEPP-4M Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP010L, pp. 896-898.
[n] R. L. Madrak and D. Wildman, “Design and High Power Testing of 52.809 MHz RF Cavities for Slip Stacking in the Fermilab Recycler”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA13, pp. 1010-1012.
[n] M. P. Kelly, J. Delayen, J. D. Fuerst, M. Kedzie, S. I. Sharamentov, and K. W. Shepard, “Microphonics Measurements in SRF Cavities for RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB043, pp. 1291-1293.
[n] G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1552-1556. doi:10.18429/JACoW-ICALEPCS2017-THPHA071
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] C. Bracco et al., “LHC Transfer Lines and Injection Tests for Run 2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2098-2100. doi:10.18429/JACoW-IPAC2015-TUPTY039
[n] H. P. Chang, C. C. Kuo, G. H. Luo, H. J. Tsai, and M. H. Wang, “The Influence of the Operation Lattice due to a 6-Tesla Superconducting Wavelength Shifter at Taiwan Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B08, pp. 651-653.
[n] G. M. Kazakevich, R. P. Johnson, B. Chase, R. J. Pasquinelli, and V. P. Yakovlev, “Modeling of Magnetron Transmitter for the Project X CW 1 GEV Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO15, pp. 966-968.
[n] M. Peryt, R. Billen, M. Martin Marquez, and Z. Zaharieva, “Database and Interface Modifications: Change Management Without Affecting the Clients”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN010, pp. 106-109.
[n] D. Gavela et al., “Fabrication and Tests of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3884-3886. doi:10.18429/JACoW-IPAC2014-THPRI051
[n] Z. P. Xie, C. Deibele, and M. J. Schulte, “Design and Analysis of a Mixed-Signal Feedback Damper System for Controlling Electron-Proton Instabilities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP085, pp. 4156-4158.
[n] A. Y. Murokh, D. M. Gassner, E. Pozdeyev, M. Ruelas, and R. Tikhoplav, “A 10 MHz Pulsed Laser Wire Scanner for Energy Recovery Linacs”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE095, pp. 1209-1211.
[n] K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748.
[n] S. Stahl and C. Ankenbrandt, “Simulation of the Capture Process in the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1117-1120.
[n] M. Sullivan, M. H. R. Donald, and M. Placidi, “The Center-of-Mass Energy of PEP-II”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH140, pp. 3570-3572.
[n] P. vom Stein, J. H. Hottenbacher, and A. Metz, “Developments towards a Full Energy Recovery Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO026, pp. 1494-1496.
[n] C. Tang, “The Development of Accelerator Applications in China”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM202, pp. XX-XX.
[n] R. Alemany-Fernandez et al., “The LHC Sequencer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN027, pp. 300-303.
[n] L. Xiao, C.-K. Ng, J. E. Dey, and I. Kourbanis, “Second Harmonic Cavity Design for Project-X Main Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC087, pp. 2417-2419.
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
[n] S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
[n] S. Takeuchi, H. Ikezoe, T. Ishii, M. Shibata, and T. Yoshida, “First Operating Experience with the Superconducting Heavy Ion Tandem-Booster Linac at JAERI”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-24, pp. 758-761.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n] T. Tajima et al., “Q Degradation of LANL 700 MHz Beta=0.64 Elliptical Cavities and ANL 340 MHz Spoke Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO030, pp. 2286-2288.
[n] C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 65-67. doi:10.18429/JACoW-LINAC2016-MOOP11
[n] J. Jentzsch, W. Bartmann, M. A. Fraser, R. Ostojic, G. Tranquille, and D. Barna, “Beam Dynamics Studies of the ELENA Electrostatic Transfer Lines in the Presence of Magnetic Stray Fields”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3351-3353. doi:10.18429/JACoW-IPAC2016-THPMB047
[n] J. C. Sheppard et al., “Update to the NLC Injector System Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH068, pp. 3834-3836.
[n] C. Zamantzas, B. Dehning, C. F. Hajdu, and S. Jackson, “Reliability Tests of the LHC Beam Loss Monitoring FPGA Firmware”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM089, pp. 408-411.
[n] S. W. Jang et al., “The High Position Resolution Cavity BPM Developments and Measurement for ILC Final Focus System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3599-3601. doi:10.18429/JACoW-IPAC2014-THPME147
[n] G. Cheng et al., “Magnetic Hygiene Control on LCLS-II Cryomodules Fabricated at JLab”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 153-157. doi:10.18429/JACoW-SRF2017-MOPB044
[n] J. Gronberg et al., “Lasers and Optics for a Gamma-Gamma Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH055, pp. 3801-3803.
[n] J. Delayen, “Lorentz Detuning of Superconducting Cavities with Unbalanced Field Profiles”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB078, pp. 1380-1382.
[n] G. J. Jan et al., “Prototype Bunch Killer System At SRRC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ16, pp. 2488-2490.
[n] R. B. Saethre, D. E. Anderson, C. Deibele, V. V. Peplov, and M. P. Stockli, “Development and Operation of the SNS Fast Chopper Systems”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper FRYBB2, pp. 1473-1477.
[n] J. Steimel, R. L. Madrak, R. J. Pasquinelli, E. Peoples-Evans, R. C. Webber, and D. Wildman, “Status and Specifications of a Project X Front-End Accelerator Test Facility at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBS6, pp. 1430-1432.
[n] R. L. Geng, E. Daly, M. A. Drury, and A. D. Palczewski, “First Attempt of At-cavity X-ray Detection in a CEBAF Cryomodule for Field Emission Monitoring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3515-3517. doi:10.18429/JACoW-IPAC2015-WEPWI012
[n] W. Wu et al., “Development of a Superconducting Focusing Solenoid for CADS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB079, pp. 1011-1013.
[n] J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570.
[n] D. F. Cosgrove, C. Curtis, and E. Gray, “Injection Methods in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1423-1426.
[n] D. Raparia, L. W. Funk, F. W. Guy, and G. T. Leifeste, “SSC Drift-Tube Linac Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-55, pp. 199-201.
[n] Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599.
[n] M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 476-478. doi:10.18429/JACoW-IPAC2014-MOPME046
[n] C. Potts, F. Brumwell, L. Donley, A. Rauchas, V. Stipp, and G. Volk, “Recent Performance of the Intense Pulsed Neutron Source Accelerator System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1651-1654.
[n] M. P. McCarthy et al., “Spallation Neutron Source (SNS) High Pulse Repetition Rate Considerations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS079, pp. 614-616.
[n] J. M. Watson, J. M. Bogaty, A. Moretti, R. A. Sacks, N. Q. Sesol, and A. J. Wright, “The Status of the Argonne Heavy Ion Fusion Low-Beta Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3449-3452.
[n] W. L. Huang et al., “A Dual Functional Current Monitor for Stripping Efficiency Measurement in CSNS”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 96-99. doi:10.18429/JACoW-IBIC2019-MOPP011
[n] M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
[n] L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
[n] M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1348-1350. doi:10.18429/JACoW-IPAC2022-TUPOTK057
[n] S. M. Cousineau et al., “The SNS Laser Stripping Injection Experiment and its Implications on Beam Accumulation”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper THWCR02, pp. 140-144.
[n] Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
[n] D. Janssen et al., “A Superconducting RF Gun Current Status of the Drossel Collaboration”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA62, pp. 2033-2035.
[n] S. Sanz et al., “Fabrication and Testing of the First Magnet Package Prototype for the SRF Linac of LIPAc”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO030, pp. 2463-2465.
[n] D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
[n] R. Billen, P. Le Roux, M. Peryt, C. Roderick, and Z. Zaharieva, “Accelerator Data Foundation: How It All Fits Together”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB001, pp. 61-65.
[n] K. W. Struve, F. W. Chambers, and J. C. Clark, “Time-Resolved Emittance Measurements with a Freely Expanding Electron Beam”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1991-1994.
[n] M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1351-1353. doi:10.18429/JACoW-IPAC2022-TUPOTK058
[n] J. Howell, H. Jostlein, and B. Wehrle, “Calculation of Pressure Distribution in Vacuum Systems Using a Commercial Finite Element Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2295-2298.
[n] R. Calà, R. Bruce, R. Cai, and F. Cerutti, “Study of the impact of BFPP losses in the LHCb insertion”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1020, unpublished.
[n] K. Seiya, B. Chase, J. E. Dey, P. W. Joireman, I. Kourbanis, and J. Reid, “Progress in Multi-Batch Slip Stacking in the Fermilab Main Injector and Future Plans”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP061, pp. 1424-1426.
[n] H. Huang et al., “Measurement of Proton Transverse Emittance in the Brookhaven AGS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 494-496. doi:10.18429/JACoW-IPAC2017-MOPAB154
[n] B. M. Campbell, M. J. Fagan, J. P. Kelley, A. D. Puckett, R. Valicenti, and J. A. Waynert, “Engineering Design of the APT Cryomodules”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4096, pp. 983-985.
[n] M. Znidarcic, E. Janezic, and K. Lang, “Beam Position Monitor for Circular Proton Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 267-269. doi:10.18429/JACoW-IPAC2016-MOPMR018
[n] F. Antoniotti et al., “Quality Management of CERN Vacuum Controls”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC027, pp. 608-611.
[n] W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 217-220. doi:10.18429/JACoW-FEL2015-MOP076
[n] J. B. Johnson, W. Broste, and C. Ekdahl, “DARHT II Accelerator Beam Position Monitor Performance Analysis”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP074, pp. 3615-3617.
[n] T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3401-3404.
[n] A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80.
[n] D. Jeon et al., “The Laser Emittance Scanner for 1 GeV H- Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP099, pp. 3684-3686.
[n] R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1118-1121. doi:10.18429/JACoW-IPAC2019-MOPTS103
[n] M. Kreider et al., “Two Years of FAIR General Machine Timing - Experiences and Improvements”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 633-637. doi:10.18429/JACoW-ICALEPCS2017-TUPHA092
For LaTeX
Use Complete Form
For BibTeX
References
- N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
- T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
- D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3995-3997.
- R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3710-3714.
- R. J. Lipton, “Radiation Damage in Detectors and Electronics”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUIOTIO02, pp. 75-79.
- V. Kiselev, E. Levichev, I. Protopopov, V. Sajaev, and V. V. Smaluk, “Non-Linear Beam Dynamics Experiments at VEPP-4M Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP010L, pp. 896-898.
- R. L. Madrak and D. Wildman, “Design and High Power Testing of 52.809 MHz RF Cavities for Slip Stacking in the Fermilab Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA13, pp. 1010-1012.
- M. P. Kelly, J. Delayen, J. D. Fuerst, M. Kedzie, S. I. Sharamentov, and K. W. Shepard, “Microphonics Measurements in SRF Cavities for RIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB043, pp. 1291-1293.
- G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1552-1556.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- C. Bracco et al., “LHC Transfer Lines and Injection Tests for Run 2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2098-2100.
- H. P. Chang, C. C. Kuo, G. H. Luo, H. J. Tsai, and M. H. Wang, “The Influence of the Operation Lattice due to a 6-Tesla Superconducting Wavelength Shifter at Taiwan Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B08, pp. 651-653.
- G. M. Kazakevich, R. P. Johnson, B. Chase, R. J. Pasquinelli, and V. P. Yakovlev, “Modeling of Magnetron Transmitter for the Project X CW 1 GEV Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO15, pp. 966-968.
- M. Peryt, R. Billen, M. Martin Marquez, and Z. Zaharieva, “Database and Interface Modifications: Change Management Without Affecting the Clients”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN010, pp. 106-109.
- D. Gavela et al., “Fabrication and Tests of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3884-3886.
- Z. P. Xie, C. Deibele, and M. J. Schulte, “Design and Analysis of a Mixed-Signal Feedback Damper System for Controlling Electron-Proton Instabilities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP085, pp. 4156-4158.
- A. Y. Murokh, D. M. Gassner, E. Pozdeyev, M. Ruelas, and R. Tikhoplav, “A 10 MHz Pulsed Laser Wire Scanner for Energy Recovery Linacs”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE095, pp. 1209-1211.
- K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748.
- S. Stahl and C. Ankenbrandt, “Simulation of the Capture Process in the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1117-1120.
- M. Sullivan, M. H. R. Donald, and M. Placidi, “The Center-of-Mass Energy of PEP-II”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH140, pp. 3570-3572.
- P. vom Stein, J. H. Hottenbacher, and A. Metz, “Developments towards a Full Energy Recovery Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO026, pp. 1494-1496.
- C. Tang, “The Development of Accelerator Applications in China”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM202, pp. XX-XX.
- R. Alemany-Fernandez et al., “The LHC Sequencer”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN027, pp. 300-303.
- L. Xiao, C.-K. Ng, J. E. Dey, and I. Kourbanis, “Second Harmonic Cavity Design for Project-X Main Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC087, pp. 2417-2419.
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
- S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
- S. Takeuchi, H. Ikezoe, T. Ishii, M. Shibata, and T. Yoshida, “First Operating Experience with the Superconducting Heavy Ion Tandem-Booster Linac at JAERI”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-24, pp. 758-761.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
- T. Tajima et al., “Q Degradation of LANL 700 MHz Beta=0.64 Elliptical Cavities and ANL 340 MHz Spoke Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO030, pp. 2286-2288.
- C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 65-67.
- J. Jentzsch, W. Bartmann, M. A. Fraser, R. Ostojic, G. Tranquille, and D. Barna, “Beam Dynamics Studies of the ELENA Electrostatic Transfer Lines in the Presence of Magnetic Stray Fields”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3351-3353.
- J. C. Sheppard et al., “Update to the NLC Injector System Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH068, pp. 3834-3836.
- C. Zamantzas, B. Dehning, C. F. Hajdu, and S. Jackson, “Reliability Tests of the LHC Beam Loss Monitoring FPGA Firmware”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM089, pp. 408-411.
- S. W. Jang et al., “The High Position Resolution Cavity BPM Developments and Measurement for ILC Final Focus System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3599-3601.
- G. Cheng et al., “Magnetic Hygiene Control on LCLS-II Cryomodules Fabricated at JLab”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 153-157.
- J. Gronberg et al., “Lasers and Optics for a Gamma-Gamma Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH055, pp. 3801-3803.
- J. Delayen, “Lorentz Detuning of Superconducting Cavities with Unbalanced Field Profiles”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB078, pp. 1380-1382.
- G. J. Jan et al., “Prototype Bunch Killer System At SRRC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ16, pp. 2488-2490.
- R. B. Saethre, D. E. Anderson, C. Deibele, V. V. Peplov, and M. P. Stockli, “Development and Operation of the SNS Fast Chopper Systems”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper FRYBB2, pp. 1473-1477.
- J. Steimel, R. L. Madrak, R. J. Pasquinelli, E. Peoples-Evans, R. C. Webber, and D. Wildman, “Status and Specifications of a Project X Front-End Accelerator Test Facility at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBS6, pp. 1430-1432.
- R. L. Geng, E. Daly, M. A. Drury, and A. D. Palczewski, “First Attempt of At-cavity X-ray Detection in a CEBAF Cryomodule for Field Emission Monitoring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3515-3517.
- W. Wu et al., “Development of a Superconducting Focusing Solenoid for CADS”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB079, pp. 1011-1013.
- J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME043, pp. 568-570.
- D. F. Cosgrove, C. Curtis, and E. Gray, “Injection Methods in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1423-1426.
- D. Raparia, L. W. Funk, F. W. Guy, and G. T. Leifeste, “SSC Drift-Tube Linac Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-55, pp. 199-201.
- Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599.
- M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 476-478.
- C. Potts, F. Brumwell, L. Donley, A. Rauchas, V. Stipp, and G. Volk, “Recent Performance of the Intense Pulsed Neutron Source Accelerator System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1651-1654.
- M. P. McCarthy et al., “Spallation Neutron Source (SNS) High Pulse Repetition Rate Considerations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS079, pp. 614-616.
- J. M. Watson, J. M. Bogaty, A. Moretti, R. A. Sacks, N. Q. Sesol, and A. J. Wright, “The Status of the Argonne Heavy Ion Fusion Low-Beta Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3449-3452.
- W. L. Huang et al., “A Dual Functional Current Monitor for Stripping Efficiency Measurement in CSNS”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 96-99.
- M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
- L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
- M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1348-1350.
- S. M. Cousineau et al., “The SNS Laser Stripping Injection Experiment and its Implications on Beam Accumulation”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper THWCR02, pp. 140-144.
- Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
- D. Janssen et al., “A Superconducting RF Gun Current Status of the Drossel Collaboration”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA62, pp. 2033-2035.
- S. Sanz et al., “Fabrication and Testing of the First Magnet Package Prototype for the SRF Linac of LIPAc”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO030, pp. 2463-2465.
- D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
- R. Billen, P. Le Roux, M. Peryt, C. Roderick, and Z. Zaharieva, “Accelerator Data Foundation: How It All Fits Together”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB001, pp. 61-65.
- K. W. Struve, F. W. Chambers, and J. C. Clark, “Time-Resolved Emittance Measurements with a Freely Expanding Electron Beam”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1991-1994.
- M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1351-1353.
- J. Howell, H. Jostlein, and B. Wehrle, “Calculation of Pressure Distribution in Vacuum Systems Using a Commercial Finite Element Program”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2295-2298.
- R. Calà, R. Bruce, R. Cai, and F. Cerutti, “Study of the impact of BFPP losses in the LHCb insertion”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1020, this conference.
- K. Seiya, B. Chase, J. E. Dey, P. W. Joireman, I. Kourbanis, and J. Reid, “Progress in Multi-Batch Slip Stacking in the Fermilab Main Injector and Future Plans”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP061, pp. 1424-1426.
- H. Huang et al., “Measurement of Proton Transverse Emittance in the Brookhaven AGS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 494-496.
- B. M. Campbell, M. J. Fagan, J. P. Kelley, A. D. Puckett, R. Valicenti, and J. A. Waynert, “Engineering Design of the APT Cryomodules”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4096, pp. 983-985.
- M. Znidarcic, E. Janezic, and K. Lang, “Beam Position Monitor for Circular Proton Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 267-269.
- F. Antoniotti et al., “Quality Management of CERN Vacuum Controls”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC027, pp. 608-611.
- W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 217-220.
- J. B. Johnson, W. Broste, and C. Ekdahl, “DARHT II Accelerator Beam Position Monitor Performance Analysis”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP074, pp. 3615-3617.
- T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3401-3404.
- A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80.
- D. Jeon et al., “The Laser Emittance Scanner for 1 GeV H- Beam”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP099, pp. 3684-3686.
- R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1118-1121.
- M. Kreider et al., “Two Years of FAIR General Machine Timing - Experiences and Improvements”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 633-637.
Back to search